[Rsblueblood]

Originally Posted by Roto-fab 1

I will start a R&D thread when a timeline is established for the project. It is our hope that the air box for the Camaro SS will fit the V6, leaving only the MAF housing and the inlet elbow to be developed. In any situation, I will keep you guys posted as we progress.

Thanks for your interest!
Michael


Roto-fab CAI for 2016+ Camaro SS:

Roto-fab CAI, dry filter, sound tube delete system, red logo

Man, I hope they are are because the last email from them it didn't sound good. Please keep me informed also.

[AlphaCamaro7]

Any updates RotoFab?


Sent from my iPhone using Tapatalk

[Bodyslide]

Any update on the ROTO-FAB V6 CAI? Thanks

[AlphaCamaro7]

Originally Posted by Bodyslide

Any update on the ROTO-FAB V6 CAI? Thanks

+1


Sent from my iPhone using Tapatalk

[Dustya]

Finally got my GM performance intake installed. Dealers around here are robbers. Finally found a dealer that was realistic. Charged me for install but not the flash.

First notice obvious is the sound the inhale and then exhaust pop at end of rev is much different. I notice more response in lower end for sure haven't driven it much yet just from the dealer home.

[Roto-fab 1]

Originally Posted by Rsblueblood

Man, I hope they are are because the last email from them it didn't sound good. Please keep me informed also.

Originally Posted by AlphaCamaro7

Any updates RotoFab?


Sent from my iPhone using Tapatalk

Originally Posted by Bodyslide

Any update on the ROTO-FAB V6 CAI? Thanks

Originally Posted by AlphaCamaro7

+1


Sent from my iPhone using Tapatalk

Thanks for the interest guys! Unfortunately, we have not started developing our V6 CAI system yet. We are currently in the final stages of development on our ZL1, and we plan to do a thorough assessment to decide if the V6 system will be our next offering for the 6th gen Camaro.

Again, thanks for the interest. I will keep you guys posted!

Michael

[vet757]

Originally Posted by Dustya

Finally got my GM performance intake installed. Dealers around here are robbers. Finally found a dealer that was realistic. Charged me for install but not the flash.

First notice obvious is the sound the inhale and then exhaust pop at end of rev is much different. I notice more response in lower end for sure haven't driven it much yet just from the dealer home.

Good to hear! Im considering one of these. Are you taking it to the dyno?

[Dustya]

Originally Posted by vet757

Good to hear! Im considering one of these. Are you taking it to the dyno?

Should I never dyno'd before what is usually the cost for dyno ? I know redline motorsports is in pompano and they work on the v8's could probably schedule one with them.

[ERP]

I installed the GM CAI and had some really good results. I didn't have the car TUNED with the GM tune. I went with the HPTune. Stock pull was 274whp and then installed the CAI and HPTune done. Car pulled 302.5whp That's a gain of 28.5whp. I'm very happy. Next I'm doing E85

[Mr. Wyndham]

Originally Posted by Dustya

Finally got my GM performance intake installed. Dealers around here are robbers. Finally found a dealer that was realistic. Charged me for install but not the flash.

First notice obvious is the sound the inhale and then exhaust pop at end of rev is much different. I notice more response in lower end for sure haven't driven it much yet just from the dealer home.

Looks great!

I have the Z/28 intake on my SS, and this looks similar in design...I have to say, I really like how the GM intakes seal all the way around the filter to prevent water/weather intrusion from the gap between the hood/fender.

[Gen6Rs]

Originally Posted by BSFATONOVICH

OK. Putting it in tomorrow. How do I post pics on this site? Also doing the exhaust tomorrow as well. The dude at the shop told me I would be wasting my money on a catback...he didn't feel it would improve because of the diameter piping already in place. Well see.

I did a cat delete thern added MagnFlow bullets. Its a matter of sound more than performance. I didnt do a before and after but did a dyno pull at 269 rwhp which is a little better than 20% loss so maybe 5 hp not sure. it may help after other mods though. Muffler delete is very loud inside the car and not a reall good sound. Its not a V8 so it sounds like a Grand prix with a big hole in the exhaust. personaly I like the sound of Borla attak.

[Bodyslide]

Originally Posted by Roto-fab 1

Thanks for the interest guys! Unfortunately, we have not started developing our V6 CAI system yet. We are currently in the final stages of development on our ZL1, and we plan to do a thorough assessment to decide if the V6 system will be our next offering for the 6th gen Camaro.

Again, thanks for the interest. I will keep you guys posted!

Michael

Please have an update if your going to do one for the V6 folks? Thanks

[AlphaCamaro7]

Originally Posted by Bodyslide

Please have an update if your going to do one for the V6 folks? Thanks

Yes we are still waiting for an update from you guys now that the zl1 intake is done


Sent from my iPhone using Tapatalk

[Roto-fab 1]

We do not have a V6 car in the shop yet, but we definitely want to.do a system for you guys. It will likely use a similar design as our Camaro SS system.