Club F1FTY - Page 394

Wolfco13 · 08-01-2017, 03:04 PM

Quote:

Originally Posted by Kaizer_911

Awesome! Details on where to get this? I think I asked before. If I did, apologies.

Sent from my iPhone using Tapatalk

I'm not sure now if I posted correct info before. I have found a few different "Scott's Tinting" pages on FB. One in TX, and one in Guam!
I'll pm you his phone no.

Kaizer_911 · 08-01-2017, 03:34 PM

Quote:

Originally Posted by Wolfco13

I'm not sure now if I posted correct info before. I have found a few different "Scott's Tinting" pages on FB. One in TX, and one in Guam!

I'll pm you his phone no.

Thanks for the PM!

Sent from my iPhone using Tapatalk

Kaizer_911 · 08-01-2017, 06:38 PM

I made a separate thread for this but open to any input from you guys and gals here.

http://www.camaro6.com/forums/showthread.php?t=503606

The post/thread reads as follows.....

Looking for anyone with ideas or experience in how to replace the front support bracket. Commonly know as the BBQ Plate or Hot Plate.

I had mine signed at CamaroFest and want to pull it off the car to protect it. (Unless people have other ideas on how to protect the signatures)

I got the part number for it, GM 84034563

See the attached pictures/diagrams to see what part I'm talking about.

Sent from my iPhone using Tapatalk

KyBoy · 08-01-2017, 07:39 PM

I'm under the impression that you unbolt the hood latch handle and it comes free. After unbolting it of course.

Heath

Kaizer_911 · 08-01-2017, 08:40 PM

Quote:

Originally Posted by KyBoy

I'm under the impression that you unbolt the hood latch handle and it comes free. After unbolting it of course.

Heath

Yeah. It "looks" simple. Just not sure lol. Guess for $40 I can find out.

Sent from my iPhone using Tapatalk

Soleil · 08-03-2017, 03:35 PM

I have to come back to an old question Has GM put any limit on production run of 50th Anniversary Edition? are there some new information?

Kaizer_911 · 08-03-2017, 03:49 PM

Quote:

Originally Posted by Soleil

I have to come back to an old question Has GM put any limit on production run of 50th Anniversary Edition? are there some new information?

Yes/no. There was never a cap/limit but they were only built during the 2017 Model Year which ended in April this year.

I got a preliminary number from a GM employee at CamaroFest of 50ths built in the US: 5,976.

I was told a detailed breakdown was still being complied. But I saw other vehicle totals on the email that was shared with me. I only remember and paid attention to the 50th.

Sent from my iPhone using Tapatalk

Billabongi · 08-03-2017, 09:06 PM

I'm becoming convinced this car is cursed. I had my 5th gen for 4.5 years and never replaced the windshield or had the bad luck of rocks like I have in this car.

Guess I'm going to try the air leak fix after all, ugh!

Homer2 · 08-03-2017, 09:34 PM

Oh shit.. on the bright side it wasn't through the glass and into your face....

Kaizer_911 · 08-03-2017, 11:53 PM

Quote:

Originally Posted by Billabongi

I'm becoming convinced this car is cursed. I had my 5th gen for 4.5 years and never replaced the windshield or had the bad luck of rocks like I have in this car.

Guess I'm going to try the air leak fix after all, ugh!

Saw your post over in the other thread. Was curious how bad. Damn that sucks.

Sent from my iPhone using Tapatalk

KyBoy · 08-04-2017, 03:34 AM

Quote:

Originally Posted by Billabongi

I'm becoming convinced this car is cursed. I had my 5th gen for 4.5 years and never replaced the windshield or had the bad luck of rocks like I have in this car.

Guess I'm going to try the air leak fix after all, ugh!

That sucks man.

Heath

Billabongi · 08-04-2017, 07:30 AM

Quote:

Originally Posted by Kaizer_911

Saw your post over in the other thread. Was curious how bad. Damn that sucks.

Sent from my iPhone using Tapatalk

It does, it's crazy how unlucky I have been with this car so far and it's not even a year old. I'm trying to stay positive though, the windshield is a easy fix, the paint would not be.

Kaizer_911 · 08-04-2017, 07:59 AM

Quote:

Originally Posted by Billabongi

It does, it's crazy how unlucky I have been with this car so far and it's not even a year old. I'm trying to stay positive though, the windshield is a easy fix, the paint would not be.

Yup. Glass easy fix. Could always be worse.

Sent from my iPhone using Tapatalk

camaromike77 · 08-04-2017, 01:34 PM

Quote:

Originally Posted by Billabongi

I'm becoming convinced this car is cursed. I had my 5th gen for 4.5 years and never replaced the windshield or had the bad luck of rocks like I have in this car.

Guess I'm going to try the air leak fix after all, ugh!

Ah!!!!!!!! THAT SUCKS!!!!

08-01-2017, 06:38 PM	#5505
Kaizer_911 Drives: 2017 2SS 50th Anniversary Edition Join Date: Aug 2011 Location: Memphis, TN Posts: 7,382 View My Garage	I made a separate thread for this but open to any input from you guys and gals here. http://www.camaro6.com/forums/showthread.php?t=503606 The post/thread reads as follows..... Looking for anyone with ideas or experience in how to replace the front support bracket. Commonly know as the BBQ Plate or Hot Plate. I had mine signed at CamaroFest and want to pull it off the car to protect it. (Unless people have other ideas on how to protect the signatures) I got the part number for it, GM 84034563 See the attached pictures/diagrams to see what part I'm talking about. Sent from my iPhone using Tapatalk __________________ 2017 50th Anniversary Edition 2SS - #TeamBeckyD 1100 - 04/29/16 \| 2000 - 05/03/16 3000 - 05/04/16 \| TPW 6/6 - 05/09/16 3100 - 05/25/16 \| 3300 - 05/28/16 3400 - 05/31/16 \| 3800 - 06/14/16, #125 Built! 4200 - 06/29/16 \| 5000 - 06/29/16 6000 - 07/08/16 \| Club F1FTY

08-01-2017, 07:39 PM	#5506
KyBoy Drives: '17 2SS H50 Join Date: Mar 2016 Location: Louisa, Ky Posts: 3,952	I'm under the impression that you unbolt the hood latch handle and it comes free. After unbolting it of course. Heath __________________ 2017 H50-2SS-MN6-F55-NPP-RIK-WL4-IO6 1100 - 5/26 0000 - Cancelled - 7/5 Contacted Becky - 7/1 2000 - 7/5 3000 - 7/6 3000 - 7/11 TPW 8/1 3100 - 7/18 TPW 8/1 3300 - 7/20 3400 - 7/21 Built - 8/2 - PS 1,182/1 of 699US 4300 - 8/3 5000 - 8/5 6000 - 8/13

08-03-2017, 03:35 PM	#5508
Soleil Drives: Camaro 50th anniversary edition Join Date: May 2017 Location: Europe Posts: 2,203 View My Garage	Has GM put any limit on production run of 50th Anniversary Edition? I have to come back to an old question Has GM put any limit on production run of 50th Anniversary Edition? are there some new information? __________________ Soleil _____________________________________________ A car is fast enough, if you fear to unlock it in the morning." (Walter Roehrl)

08-03-2017, 09:06 PM	#5510
Billabongi Drives: '17 SS 50th Camaro Join Date: Apr 2012 Location: Tampa, Florida Posts: 921	I'm becoming convinced this car is cursed. I had my 5th gen for 4.5 years and never replaced the windshield or had the bad luck of rocks like I have in this car. Guess I'm going to try the air leak fix after all, ugh! Attached Images __________________ 2017 50th Anniversary 2LT\RS - #1583 SOLD 2017 50th Anniversary 2SS - #3410

08-03-2017, 09:34 PM	#5511
Homer2 Drives: 50th Anni.. coming home 11/01 Join Date: Jul 2014 Location: Toronto. Ontario Posts: 1,639	Oh shit.. on the bright side it wasn't through the glass and into your face.... __________________ ##################### Built Sept 16/2016 - #2681 of 5955. She came home with me 11/01/16. 50th Anni, 2SS, A8, NPP, NGM Rock Guards, Footwell Lighting, Black Bow Ties, Street Warrior Rotors and Pads, Ceramic Pro, 3M PPF, Oracle Ghosted Side Markers, Kooks 2" headers w/hi flow cats. GPI Stage 1 Cam installed at 305,000 kms.

User Name		Remember Me?
Password