[94boosted]

Originally Posted by FNxR3DNECK

Yep turns out they rubbed a bit, not the tire but the lip of the wheel on the strut. Didn’t happen until I maxed the camber out at -2.6 degrees. I think it’s mainly due to how the lip on these MRRs is made, it’s squared off (like it’s huge haha) so it has less clearance than other wheels. All is good though it wasn’t to bad, I never felt any vibrations from it.

Glad to hear it wasn't bad. I'm leaning towards some MRR FS01's or FS06's so I can get them in the offsets I want.

[apexit53]

Anyone need a set of F street spec wheels??

hit me up!

[Scargoes]

You moving to CAM-C or BS?

[apexit53]

Originally Posted by Scargoes

You moving to CAM-C or BS?

neitheR

[trophy hunter]

Originally Posted by apexit53

neitheR

…….. I like that type (R) of hint you gave, hope that you're able to "Hondal" the pressure
Sad to see you go, if it happens; but good luck in the new class - it appears to be "the car to have" ……… so far

Also, I would be all over those Forgestars myself, but I have your old ones and another set of Forgestars that I just purchased last month

[D K]

Originally Posted by apexit53

Anyone need a set of F street spec wheels??

hit me up!

Not overly familiar with the class....what size?

[94boosted]

Originally Posted by D K

Not overly familiar with the class....what size?

Most likely a 19x8.5F and a 19x10R

[trophy hunter]

Originally Posted by D K

Not overly familiar with the class....what size?

They are 19 x 8.5 & 19 x 9.5

…..here is his sale post:
https://www.camaro6.com/forums/showthread.php?t=544977

[D K]

Is everyone running 19" for a reason?

I would think 18" , specially for autox, would be better.

Class rules?

[94boosted]

Originally Posted by D K

Is everyone running 19" for a reason?

I would think 18" , specially for autox, would be better.

Class rules?

Yah same width as stock, +/- 1" diameter and +/- 7mm offset in street classes

[apexit53]

Originally Posted by D K

Not overly familiar with the class....what size?

Yep 19x8.5 front

19X9.5 rear

Stock offsets.

19" per the spca rules. We are allowed to change wheel diameter + or - one inch. 20" are just redonk expensive. especially if you are buying two sets a year like I am.

[slvrsrpnt]

http://youtu.be/McnSCPjqxnw
My best run of the day. We had 4 1LEs at the airstrip today. Needless to say, my runs make the other drivers look that much better!

[apexit53]

Originally Posted by slvrsrpnt

http://youtu.be/McnSCPjqxnw
My best run of the day. We had 4 1LEs at the airstrip today. Needless to say, my runs make the other drivers look that much better!

nice! I saw a few photos from a friend that live there and was codriving the green one!

[slvrsrpnt]

Originally Posted by apexit53

nice! I saw a few photos from a friend that live there and was codriving the green one!

The green had 4 drivers and the blue one had 2.
We had 3 of us out there at once on a single run.

All the 1LE drivers did super well