[camaromike77]

Originally Posted by AdmAnt13

It's silver/chrome rather than black like the 2SS. That picture doesn't show it off well.

Thanks AdmAnt13 for clarifying. My camera SUCKS........

Originally Posted by srcstc

What's the part number for that one?

Sent from my iPhone using Tapatalk

Part Number is 23402526 (Gen 6 ZL1 Silver Start Button)

[camaromike77]

Here is a better pic...... I also swapped out the OEM outside trim (shown here in piano black), as it was chrome as well, so it matched the new button perfect........

[Mr. Rager]

Switched out the red SS badges for 50th anniversary gray SS badges. Had to buy some 3m tape to redo the rear. I won't name names but some idiot installed it upside down on the first attempt and turned a 10 minute job into a 30 minute job .

Tomorrow BMR trailing arms and rear 1le sway.

[RedDragon16]

Red dragon is no longer red. What you guys think? Sorry for the huge image on iphone :(

[AlphaCamaro7]

Originally Posted by Mr. Rager

Switched out the red SS badges for 50th anniversary gray SS badges. Had to buy some 3m tape to redo the rear. I won't name names but some idiot installed it upside down on the first attempt and turned a 10 minute job into a 30 minute job .



Tomorrow BMR trailing arms and rear 1le sway.

Pictures Please we love pictures


Sent from my iPhone using Tapatalk

[AlphaCamaro7]

Originally Posted by RedDragon16

Red dragon is no longer red. What you guys think? Sorry for the huge image on iphone :(

Looks dope, add some more picture with different angles.


Sent from my iPhone using Tapatalk

[RedDragon16]

I will as soon as i put the badges back on! Tomorow for sure ����

[camaromike77]

Originally Posted by Mr. Rager

Switched out the red SS badges for 50th anniversary gray SS badges. Had to buy some 3m tape to redo the rear. I won't name names but some idiot installed it upside down on the first attempt and turned a 10 minute job into a 30 minute job .

Tomorrow BMR trailing arms and rear 1le sway.

Sounds like something I would do...... ....

As mentioned above, would be GREAT to see some pics of that!!

[RedDragon16]

Again sorry for big pictures! It color changes so much! In the sun its like a gray/gold and with little light it goes to a dark silver then at night its just dark lol

[RedDragon16]

I should of just uploaded from my computer sorry :(

[samsumon]

Originally Posted by 00 Trans Ram

So, living in New Orleans, I've been getting a lot of condensation on the windshield lately. As in, every morning. Brought it to the dealership. They said that they've verified that ALL the Camaros do the same thing (customer car in for warranty work, plus 4 new Camaros on the lot). They also checked the voltage going to the damper motor, and it is working properly. Their conclusion was that the damper simply isn't sealing off all the air. Short of completely disassembling the dash, they don't see a way to fix it. So, I've added my name to the list so that hopefully there will be a recall.

But, until then, I decided to do something myself. Got some heavy construction paper and made a template (put it on the vent, pressed down to make dents at the edges, then traced the dents with a pencil). I had to fine-tune the cutout a few times to get it to fit exactly.

When I got it to fit perfectly, I put a 3M Di-Noc carbon fiber sticker/film on top of the paper. Then, I put several spots of double-sided tape on the bottom to hold it in place (the tape strips that come with those wall-mounted hooks works great). The last thing I did was grab some black duck tape and line the underside of the edge nearest the windshield (so that absolutely no air would escape out of the front - only the back that is farthest away from the windshield).

Stuck the whole thing down, and here is the result.





After 3 days of driving, I can report that there is NO condensation on the windshield. It works perfectly.

Got any extra u wanna send over ? Ill pay for shipping! PM me if u do!

[gpskinzhut]

Swapped in the Powerstop Z26 carbon ceramic pads on the car last night, and found some assembly line shenanigans on my inner wheel well

[Richard0nee]

Originally Posted by RedDragon16

Red dragon is no longer red. What you guys think? Sorry for the huge image on iphone :(

Looks good! How much did that cost you? At least $2k I'm assuming.

[RedDragon16]

I got sorta sponsored by the guy for marketing purposes. Usually charges around 3-4k but charged me 1200 lol did a good job!