[wang970305]

Originally Posted by Megahurtz

On the stock cam, I would stick with the LT2 and port match it to a 95mm TB and then have the 95mm TB ported or get the 100mm eff TB from Solar. This is more air than the stock cam can even use.

The MSD is great and will make more power at the very top of the rev range, but you will trade that for a little bit of a loss in low end power(less than 4000 rpm). For a street car without a cam, it makes the car feel a little less torque-y and less fun, in my opinion.

Appreciate the feedback. I just got my IM ported and sealed the TB connection with RTV, now I’m thinking if I should remove the RTV and TB for a ported Katech 95 or just stick with the set up and save myself some effort lol. Not quite too sure what the gain is between ported LT5 and OEM

[Megahurtz]

Originally Posted by wang970305

Appreciate the feedback. I just got my IM ported and sealed the TB connection with RTV, now I’m thinking if I should remove the RTV and TB for a ported Katech 95 or just stick with the set up and save myself some effort lol. Not quite too sure what the gain is between ported LT5 and OEM

The gains would be minimal.

I happen to have a ported 95 from Soler(100mm eff), with about 100 miles on it, for sale. That's not why I recommended it, but it just so happens I have one I'd let go for $150. I don't think Soler actually sells this version anymore. Now he sells the 95mm plus port which is similar but the 100mm eff unit has flattened throttle bar.

[wang970305]

Originally Posted by Megahurtz

The gains would be minimal.

I happen to have a ported 95 from Soler(100mm eff), with about 100 miles on it, for sale. That's not why I recommended it, but it just so happens I have one I'd let go for $150. I don't think Soler actually sells this version anymore. Now he sells the 95mm plus port which is similar but the 100mm eff unit has flattened throttle bar.

Why ate you selling it? Can you post some pictures here? I might be interested 😉

[Megahurtz]

Originally Posted by wang970305

Why ate you selling it? Can you post some pictures here? I might be interested 😉

https://www.camaro6.com/forums/showt...9#post11477469

[wang970305]

Originally Posted by Megahurtz

https://www.camaro6.com/forums/showt...9#post11477469

Nice, what is the least you would take?, I might get it just for comparison during the tuning process

[vince3]

$150 is pretty cheap already

[wang970305]

Originally Posted by vince3

$150 is pretty cheap already

I was just checking. If you feel it’s pretty cheap then why don’t you get it lol

[Megahurtz]

Originally Posted by wang970305

Nice, what is the least you would take?, I might get it just for comparison during the tuning process

$175 shipped. Shipping is about $20 or so and then paypal fees.

[vince3]

Originally Posted by wang970305

I was just checking. If you feel it’s pretty cheap then why don’t you get it lol

Because I would be doing the same. Just testing it against a unported 95mm. I do not think I would gain any power and I have a ported MSD. Maybe it would drive a little better and i could sell them unopened new in box 95mm.