Ngauge Mounted In Vent Pod - Page 2

Boost or bust · 04-01-2018, 04:29 PM

Quote:

Originally Posted by TDS

The P3 is just a gauge as far as I know. The Nguage stores your stock tune plus 4 more custom tunes. You can load tunes in about 5 minutes from the touch screen. It also can data log just like HP tuners pro. Has a removal SD card to down load your tunes and data logs.

Ok, thank you. Checking with my tuner this week. Will order the ngauge from RDP store, one of the forum sponsors. Hoping my tuner can develop a 91and 95 octane tune so I can switch depending on fuel availability. Wonder how much power is to be had between the 2 tunes? Guessing maybe 15-20 hp....I’ll take every one😁

TDS · 04-01-2018, 06:19 PM

Quote:

Originally Posted by Boost or bust

Ok, thank you. Checking with my tuner this week. Will order the ngauge from RDP store, one of the forum sponsors. Hoping my tuner can develop a 91and 95 octane tune so I can switch depending on fuel availability. Wonder how much power is to be had between the 2 tunes? Guessing maybe 15-20 hp....I’ll take every one😁

Think it would depend on your supporting mods

Deadmau5 · 04-01-2018, 10:29 PM

I thought ngauge wasn't compatible with zl1

Sent from my Pixel 2 XL using Tapatalk

TDS · 04-02-2018, 08:05 AM

Quote:

Originally Posted by Deadmau5

I thought ngauge wasn't compatible with zl1

Sent from my Pixel 2 XL using Tapatalk

Works in mine. Only thing I have not figured out is the boost does not read right. I think I must have it on the wrong single.

Deadmau5 · 04-02-2018, 08:44 AM

Quote:

Originally Posted by TDS

Works in mine. Only thing I have not figured out is the boost does not read right. I think I must have it on the wrong single.

I know the standard reading tools on it work. What I'm saying is I was told.you can't tune through it. Tuners can't load your tunes on them. Had weapon x confirm , vengeance racing etc

Sent from my Pixel 2 XL using Tapatalk

DFW1LE · 04-02-2018, 08:52 AM

The ngauge is not yet able to program the 2017 ecu. This is being worked on, but I am not aware of when an updated firmware will be available to activate the tuning function. You can still monitor pids and I believe data log, just not able to load tunes at this time. This is not a problem on 2016 Camaro.

JFM-jr · 04-02-2018, 09:00 AM

Not sure this is even relevant to some of you guys but for me the fact that the P3 gauge does not read ethanol content steered me to the Aeroforce unit.

Boost or bust · 04-02-2018, 09:38 AM

Quote:

Originally Posted by Deadmau5

I know the standard reading tools on it work. What I'm saying is I was told.you can't tune through it. Tuners can't load your tunes on them. Had weapon x confirm , vengeance racing etc

Sent from my Pixel 2 XL using Tapatalk

Steve at the RDP Store (forum sponsor) said that it WAS capable of loading and unloading tunes to my 2018 ZL1M6

DFW1LE · 04-02-2018, 09:39 AM

Quote:

Originally Posted by JFM-jr

Not sure this is even relevant to some of you guys but for me the fact that the P3 gauge does not read ethanol content steered me to the Aeroforce unit.

gauge also reads ethanol content.

DFW1LE · 04-02-2018, 09:41 AM

Quote:

Originally Posted by Boost or bust

Steve at the RDP Store (forum sponsor) said that it WAS capable of loading and unloading tunes to my 2018 ZL1M6

Steve, told me that as well for my 2017 and it turned out to be incorrect. Nevertheless, I am for the time being just using it to measure e content and a few other parameters.

TDS · 04-02-2018, 11:12 AM

Quote:

Originally Posted by Deadmau5

I know the standard reading tools on it work. What I'm saying is I was told.you can't tune through it. Tuners can't load your tunes on them. Had weapon x confirm , vengeance racing etc

Sent from my Pixel 2 XL using Tapatalk

I know the tunes are in it because I have seen the files, However I have not tried to load any. Had no idea that it was not able to load the files. Not going to lie, little upset about that.

SSUNDVL · 10-03-2021, 05:51 PM

what did you use to shave the inside of the pod? Also do you think this would work with the dual pod they sell or would that cause fitment issues?

04-02-2018, 08:52 AM	#20
DFW1LE Drives: 2017 SS 1LE Mosiac Black Join Date: Nov 2016 Location: DFW, TX Posts: 1,132	The ngauge is not yet able to program the 2017 ecu. This is being worked on, but I am not aware of when an updated firmware will be available to activate the tuning function. You can still monitor pids and I believe data log, just not able to load tunes at this time. This is not a problem on 2016 Camaro. __________________ ________________________________________________ Frankenstein Engineering Dynamics Stage 1 H/C/E85 536HP/488TQ

04-02-2018, 09:00 AM	#21
JFM-jr Drives: 2016 Camaro 2SS Join Date: Mar 2016 Location: Suffolk Long Island Posts: 954	Not sure this is even relevant to some of you guys but for me the fact that the P3 gauge does not read ethanol content steered me to the Aeroforce unit. __________________ 2016 Hyper Blue 2SS A8,NPP,Moonroof Pray ported factory intake manifold Ported TB Rotofab ARH 1 7/8 longtubes hi flow cats AFM deleted E85 11.0@124.9 11.65@118.8 pump gas,stock tune/exhaust New combo: Pray Performance Heads/cam MSD intake manifold and Circle D 3C 554/491 on E85 all work & tuning done by Pray

04-01-2018, 10:29 PM	#17
Deadmau5 Drives: 2015 procharged mustang gt Join Date: Aug 2017 Location: US Posts: 284	I thought ngauge wasn't compatible with zl1 Sent from my Pixel 2 XL using Tapatalk

10-03-2021, 05:51 PM	#26
SSUNDVL Drives: 2016 Camaro SS Join Date: Jul 2020 Location: Dallas, TX Posts: 149	what did you use to shave the inside of the pod? Also do you think this would work with the dual pod they sell or would that cause fitment issues?

User Name		Remember Me?
Password