[KoolHyperBlue]

I keep mine in the front window on the passenger side . I've already been pulled over once and cop said nothing about having no front plate and me having it in the front window. I would never ruin the appearance of that front grille with a license plate . Like most others , I roll the dice

[mlee]

Originally Posted by KoolHyperBlue

I keep mine in the front window on the passenger side . I've already been pulled over once and cop said nothing about having no front plate and me having it in the front window. I would never ruin the appearance of that front grille with a license plate . Like most others , I roll the dice

You are rolling the dice. That's nothing but a flying razor blade in an accident.


...and actually looks worse than just putting it on the front bumper.

[Husker67]

Just ordered one for my '16 2SS. Hope I like it, not some cheap POS.

[jimmypop13]

Originally Posted by mlee

You are rolling the dice. That's nothing but a flying razor blade in an accident.


...and actually looks worse than just putting it on the front bumper.

Agreed. Plus I've spoken to cops that will pull people over with it there in the windshield bc they know someone is trying to skirt the law and not put it on. It's not legal in the windshield and it looks bad to boot

[Android42019]

Here's a suggestion, my kids window shades came with 2 extra suction cups(total of 4) and I used those to suction cup mine to the top right of my window. I've been seeing more and more people doing this and it honestly doesn't hinder vision, unless you're trying to look at birds lol

[H(.)(.)ters]

Originally Posted by Allenault

how did you zip tie that? I'm having huge problem figuring it out

Ok, so you have to use big zip ties where they won't pull through the holes of the plastic license plate holder. So, you push the zip tip through the front hole (where you normally would use a screw to go into the bumper). Then, you simply loop the zip tie around the grill and right back through the same hole from the backside. If your zip tie end is fat enough, it will lock into place. Tighten to your presence and repeat for the other hole. Very simple.

[H(.)(.)ters]

Originally Posted by Sham001

Nice Car....! Is this is the ACS Composite Front Splitter or the GM?

Thanks. GM splitter bought from Rodgers Chevrolet (Becky's co-worker in parts).

[KoolHyperBlue]

I rather gamble then ruin the beautiful appearance of my car with a ugly license plate . Plus I have my brother in law who's a cop and my PBA shield cards so most cops won't write a ticket if you know someone . Just saying

[HomeBrewer]

Originally Posted by Husker67

Just ordered one for my '16 2SS. Hope I like it, not some cheap POS.

That's what I have. Works great. Took all of 10 minutes to install.

I usually ride around without the front plate, but put it on if I really want to avoid being delayed by a traffic stop.

[tones2SS]

Originally Posted by H(.)(.)ters

Zip ties...no drilling.

Really?!?! Looks like you have a front license plate bracket on your front end?

[BlackwidowSS_16]

Originally Posted by LibertyHill

I bent mine a bit and stuck it on with 3M tape.

what rims are those am interested ?

[chrisvr6]

some dealers here made it like this