06-28-2018, 07:25 PM | #15 |
Drives: 2LT, Blue Velvet, Kalahari, Convert Join Date: Feb 2016
Location: NV
Posts: 185
|
Just picked up my car. Parts on order. They will have to have it for a few days. The part is a hydraulic cylinder with a push rod that is down in the lower mechanism. They have to remove the rear seat, etc to get to it.
__________________
2LT, RS, V6, A8, Vert, Blue Velvet, Kalahari, Split Silver rims, Convenience & Technology pkgs
——————————— |
07-01-2018, 10:21 AM | #16 |
Drives: 2017 Camaro as convertible Join Date: Jan 2018
Location: Warren mi
Posts: 21
|
Same thing happened to be but the push rod hit the body part that is just behind the seat when the top is down so now I have a dent and a chip in paint.
|
07-01-2018, 05:15 PM | #17 |
Drives: 2017 Camaro Convertible SS Fifty Join Date: May 2018
Location: Los Angeles
Posts: 340
|
Not sure I stated it, but they ordered a whole new convertible top, so once that comes in everything will be done (panel, etc.).
Question, you mention the hydraulic cylinder, when the top is replaced is that replaced as well? Or is that something I need bring up as a concern?
__________________
2017 Camaro SS FIFTY Convertible
|
07-02-2018, 09:03 AM | #18 |
Drives: 2LT, Blue Velvet, Kalahari, Convert Join Date: Feb 2016
Location: NV
Posts: 185
|
From your earlier posts reporting the problems you are having, I would assume that they are going to replace the top fabric with the window. The only framework they will replace is that which is responsible for your damage. If a bad cylinder was responsible for the damage then that should be replaced.
They need to determine what caused the original damage so they can replace the correct parts.
__________________
2LT, RS, V6, A8, Vert, Blue Velvet, Kalahari, Split Silver rims, Convenience & Technology pkgs
——————————— |
07-02-2018, 10:03 AM | #19 | |
Drives: 2018 Hyper Blue 2SS convertible Join Date: Aug 2017
Location: S.E.Wisconsin
Posts: 182
|
Quote:
__________________
2018 HBM 2SS CONVERTIBLE A8 |
|
07-02-2018, 08:29 PM | #20 |
Drives: 2017 Camaro 2SS Nightfall Gray vert Join Date: Jan 2018
Location: Swansea, IL
Posts: 1,219
|
I did not have any sort of recall number. Sorry. To make sure it wouldn’t cause further problems, the mechanic ripped the top flap off and ordered replacement parts. In a couple weeks when I M back with the mechanics, if nobody else posts about a recall, I will ask them if there is a recall number.
__________________
2017 Camaro 2SS vert - Nightfall Gray
Magnuson Heartbeat SC - Tuned by JRE Racing 776whp/745wtq (12psi) 2018 Corvette Z06 vert- Black To be tuned by JRE Racing TBD performance Last edited by Drsagacity; 07-03-2018 at 02:35 PM. |
07-20-2018, 08:47 AM | #21 |
Drives: 2LT, Blue Velvet, Kalahari, Convert Join Date: Feb 2016
Location: NV
Posts: 185
|
Got my car back from the dealer yesterday after the warranty work.
They ordered the cylinder and instead of a week it was almost two before the part arrived. I took the car in and after 3 days they told me the part arrived minus a required retainer clip. So another day delay. Now the top functions properly, no clanging or cracking sounds. As an aside, I specifically asked that they not wash the car because they have a washer that is so brutal they feel the need to place a disclaimer on your work order that says they are not responsible for a cracked windshield! That disclaimer was not on my initial work order, only on the final sign off (which I did not initial). Guess what, they washed the car. As clarification, the reason I asked them to not wash the car is for obvious reasons like swirl marks, and I didn't want some boom to be dropped onto the top. But bear in mind that in Las Vegas yesterday the temp reached 103, so of course there were a few water spots. Fortunately the 3 coats of Blackfire Crystal Seal prevented the spots from etching into the paint. Oh I almost forgot, I had to touch up 4 small paint chips on the tonneau and had to clean a few grease marks off the leather seats. All in all a typical dealer visitation, but at least I can now take advantage of a convertible top.
__________________
2LT, RS, V6, A8, Vert, Blue Velvet, Kalahari, Split Silver rims, Convenience & Technology pkgs
——————————— |
08-15-2018, 05:30 PM | #22 |
Drives: 2017 LS Convertible Join Date: Mar 2018
Location: NC
Posts: 11
|
Broke our panel as well. Dealer "fixed" it by replacing the panel and putting white grease on the door that slides.
Worked exactly once before we heard nasty noises again. Back to the dealer, couldn't figure out what was wrong. Looked around and noticed a large plastic clip inside broke as well (showing the good and broken sides). Emailed the pictures to the dealer so they can fix it right this time. |
08-15-2018, 05:42 PM | #23 |
Account Suspended
Drives: 2019 Plum Crazy Scat Pack Charger Join Date: Jul 2018
Location: South Ga.
Posts: 263
|
Had both of my panels replaced last week under warranty. One cause it was FUBAR and the other as preventative. The engineer that came up with the design for that should be kneecapped with a .22.
|
08-15-2018, 08:00 PM | #24 |
Drives: 2LT, Blue Velvet, Kalahari, Convert Join Date: Feb 2016
Location: NV
Posts: 185
|
The way it was explained to me as I watched the service writer testing mine before the repair, when lowering the top, if you see it is retracting with a slight tilt, that is the problem.
The bias to one side or another causes the framework to move from a smooth up/down motion to a slight sideways motion. That framework then makes contact against the panel. The bias and tilt is the result of loss of hydraulic pressure in one of the cylinders.
__________________
2LT, RS, V6, A8, Vert, Blue Velvet, Kalahari, Split Silver rims, Convenience & Technology pkgs
——————————— |
08-17-2018, 04:19 PM | #25 |
Drives: 2017 Camaro 1LT Convertible Auto V6 Join Date: Jul 2017
Location: Covina
Posts: 154
|
Just got mine fixed on the driver/left side, GM part # 84397871
https://www.gmpartsgiant.com/parts/g...-84397871.html Last edited by somedude; 08-23-2018 at 12:15 AM. |
08-17-2018, 04:54 PM | #26 |
Summit White 2SS
Drives: 2017 Summit White 2SS, 2018 Tahoe Join Date: Nov 2016
Location: Dayton, OH
Posts: 80
|
I have been told that something inside the panel that slides during top operation can break with as little as 10 lbs of pressure applied. Any chance people are climbing in the back seat while the top is down and trying to steady themselves there on that panel?
Just an FYI for future reference.
__________________
____________________ 2017 Summit White 2SS Last edited by Keifer; 08-17-2018 at 05:05 PM. |
08-18-2018, 09:02 AM | #27 |
Drives: 2LT, Blue Velvet, Kalahari, Convert Join Date: Feb 2016
Location: NV
Posts: 185
|
When the service advisor was looking over my car, he inadvertently had his hand on the retractable panel. Without realizing it he put enough force on it to move it out of the track. Fortunately it popped back into place. He noticed that I had put white lithium grease on the tracks and said that was a good idea as he had noted that a lot of cars had flaps that would hang up occasionally.
__________________
2LT, RS, V6, A8, Vert, Blue Velvet, Kalahari, Split Silver rims, Convenience & Technology pkgs
——————————— |
08-18-2018, 10:02 AM | #28 |
Account Suspended
Drives: 2019 Plum Crazy Scat Pack Charger Join Date: Jul 2018
Location: South Ga.
Posts: 263
|
Wish I had thought to take some pics while they had my panels off for replacement. Took all of 10 minutes to do both sides. Way to complicated for what it accomplishes and is about as durable as a wet Klenex. Dealership does not fool with the tops. The have a shop that does all their stuff for them. I was talking to the head tech while he was finishing up on my car, showing me how everything worked, his last words to me were " If you keep this car any length of time, I will see you again."
|
|
|
Post Reply
|
|
|