Chevy71's Hyperblue 2SS build, pro charger, cam, and more - Page 2

Chevy71 · 08-16-2017, 06:46 PM

I just put an order in for more parts! Mostly performance again, but some cosmetic as well. I was thinking real hard on the Skorpion hood by 6LE, but it was hard to get any good data on how it does with rain water.

Chevy71 · 08-23-2017, 03:33 PM

For those that are watching and not posting, I'll put up another update. Some of my parts have showed up. I put my new tailights in yesterday and the front bow tie on. It's much better than my last black one that started to peel up after some road grim got it

Chevy71 · 08-23-2017, 03:35 PM

My shifter made it today! I can't wait for The weekend to get this short throw in!

Chevy71 · 08-30-2017, 07:55 PM

What a great weekend.. I got my shaft installed, my short throw shifter, and my fifty SS emblems.

Chevy71 · 08-30-2017, 07:57 PM

Not having a lift and crawling under this car was not good for my little fat tail!

Chevy71 · 08-30-2017, 08:02 PM

I love the shifter, it's such a shorter throw!

DapperDan · 09-04-2017, 06:40 PM

If you ever get down this way,I have a dragpack you could try so we all can see what that beast will really run.

ShizzySupra · 09-05-2017, 05:26 PM

Looks great, where did you get the black SS badge for the front?

Chevy71 · 09-05-2017, 06:01 PM

Quote:

Originally Posted by ShizzySupra

Looks great, where did you get the black SS badge for the front?

I got it from thatgmparts.com this is what came on the fifty edition. I got thdon't front and rear black SS symbols. They were cheap and easy to change. I would recommend this to anyon looking for a darker look.

Chevy71 · 09-05-2017, 06:03 PM

Quote:

Originally Posted by DapperDan

If you ever get down this way,I have a dragpack you could try so we all can see what that beast will really run.

Thanks man! I'm excited to run it too. I do have tires for it, just need to get rims for them and better axles that can handle hooking up haha! It was a spin fest last time I went

Chevy71 · 09-05-2017, 06:11 PM

The black emblems installed. Still up against if I should add the bowtie back to the back or not.

brettman · 09-05-2017, 06:18 PM

I'd wait on that, First you have to learn to get your pictures facing the right way.
My heck hurt...LOL.

Chevy71 · 09-06-2017, 10:22 PM

Quote:

Originally Posted by brettman

I'd wait on that, First you have to learn to get your pictures facing the right way.
My heck hurt...LOL.

I wish I knew how to rotate the pictures on here, and also shrink them so they don't blow up post and make it four times bigger.

brettman · 09-07-2017, 07:24 AM

Quote:

Originally Posted by Chevy71

I wish I knew how to rotate the pictures on here, and also shrink them so they don't blow up post and make it four times bigger.

I do mine in the computer tool bar before I post. Try that, I like viewing your pics, But my 22" monitor is to heavy to flip...lol

08-16-2017, 06:46 PM	#15
Chevy71 Drives: 2016 2SS Join Date: Feb 2017 Location: Pittsburgh PA Posts: 977 View My Garage	I just put an order in for more parts! Mostly performance again, but some cosmetic as well. I was thinking real hard on the Skorpion hood by 6LE, but it was hard to get any good data on how it does with rain water. __________________ 2016 2SS/Hyper Blue/M6/NPP/Navi Forged pistons Custom cut Brian Tooley Cam SW long tube headers 3" stainless mid pipe - Secondary Cat delete - High flow cats Port and polished heads-Double valve springs-platinum lifters & push rods Cam phaser limiter - DOD delete P1SC-1 Pro Charger 3.7 pulley Stage II intercooler 667rwhp 577ft lbs Last edited by Chevy71; 08-18-2017 at 07:22 AM.

08-23-2017, 03:33 PM	#16
Chevy71 Drives: 2016 2SS Join Date: Feb 2017 Location: Pittsburgh PA Posts: 977 View My Garage	For those that are watching and not posting, I'll put up another update. Some of my parts have showed up. I put my new tailights in yesterday and the front bow tie on. It's much better than my last black one that started to peel up after some road grim got it Attached Images __________________ 2016 2SS/Hyper Blue/M6/NPP/Navi Forged pistons Custom cut Brian Tooley Cam SW long tube headers 3" stainless mid pipe - Secondary Cat delete - High flow cats Port and polished heads-Double valve springs-platinum lifters & push rods Cam phaser limiter - DOD delete P1SC-1 Pro Charger 3.7 pulley Stage II intercooler 667rwhp 577ft lbs

08-23-2017, 03:35 PM	#17
Chevy71 Drives: 2016 2SS Join Date: Feb 2017 Location: Pittsburgh PA Posts: 977 View My Garage	My shifter made it today! I can't wait for The weekend to get this short throw in! Attached Images __________________ 2016 2SS/Hyper Blue/M6/NPP/Navi Forged pistons Custom cut Brian Tooley Cam SW long tube headers 3" stainless mid pipe - Secondary Cat delete - High flow cats Port and polished heads-Double valve springs-platinum lifters & push rods Cam phaser limiter - DOD delete P1SC-1 Pro Charger 3.7 pulley Stage II intercooler 667rwhp 577ft lbs

08-30-2017, 07:55 PM	#18
Chevy71 Drives: 2016 2SS Join Date: Feb 2017 Location: Pittsburgh PA Posts: 977 View My Garage	What a great weekend.. I got my shaft installed, my short throw shifter, and my fifty SS emblems. __________________ 2016 2SS/Hyper Blue/M6/NPP/Navi Forged pistons Custom cut Brian Tooley Cam SW long tube headers 3" stainless mid pipe - Secondary Cat delete - High flow cats Port and polished heads-Double valve springs-platinum lifters & push rods Cam phaser limiter - DOD delete P1SC-1 Pro Charger 3.7 pulley Stage II intercooler 667rwhp 577ft lbs

08-30-2017, 07:57 PM	#19
Chevy71 Drives: 2016 2SS Join Date: Feb 2017 Location: Pittsburgh PA Posts: 977 View My Garage	Not having a lift and crawling under this car was not good for my little fat tail! Attached Images __________________ 2016 2SS/Hyper Blue/M6/NPP/Navi Forged pistons Custom cut Brian Tooley Cam SW long tube headers 3" stainless mid pipe - Secondary Cat delete - High flow cats Port and polished heads-Double valve springs-platinum lifters & push rods Cam phaser limiter - DOD delete P1SC-1 Pro Charger 3.7 pulley Stage II intercooler 667rwhp 577ft lbs

08-30-2017, 08:02 PM	#20
Chevy71 Drives: 2016 2SS Join Date: Feb 2017 Location: Pittsburgh PA Posts: 977 View My Garage	I love the shifter, it's such a shorter throw! Attached Images __________________ 2016 2SS/Hyper Blue/M6/NPP/Navi Forged pistons Custom cut Brian Tooley Cam SW long tube headers 3" stainless mid pipe - Secondary Cat delete - High flow cats Port and polished heads-Double valve springs-platinum lifters & push rods Cam phaser limiter - DOD delete P1SC-1 Pro Charger 3.7 pulley Stage II intercooler 667rwhp 577ft lbs

09-04-2017, 06:40 PM	#21
DapperDan Drives: 2017 1SS A8 Nightfall Gray Join Date: Feb 2017 Location: Maryland Posts: 333	If you ever get down this way,I have a dragpack you could try so we all can see what that beast will really run.

09-05-2017, 05:26 PM	#22
ShizzySupra Drives: 16' Camaro 2SS Join Date: Sep 2015 Location: Oregon Posts: 381	Looks great, where did you get the black SS badge for the front?

09-05-2017, 06:11 PM	#25
Chevy71 Drives: 2016 2SS Join Date: Feb 2017 Location: Pittsburgh PA Posts: 977 View My Garage	The black emblems installed. Still up against if I should add the bowtie back to the back or not. Attached Images __________________ 2016 2SS/Hyper Blue/M6/NPP/Navi Forged pistons Custom cut Brian Tooley Cam SW long tube headers 3" stainless mid pipe - Secondary Cat delete - High flow cats Port and polished heads-Double valve springs-platinum lifters & push rods Cam phaser limiter - DOD delete P1SC-1 Pro Charger 3.7 pulley Stage II intercooler 667rwhp 577ft lbs

09-05-2017, 06:18 PM	#26
brettman Drives: 2016 Camaro SS Join Date: Mar 2017 Location: Cleveland, Ohio Posts: 912 View My Garage	I'd wait on that, First you have to learn to get your pictures facing the right way. My heck hurt...LOL. __________________ 2016 Camaro 1SS, Red Hot, K&N Blackhawk intake, Whipple Supercharger, 3.125 pulley, Kooks 2" long tube headers, High flow cats, secondary cats delete, Mishimoto catch can, P3gauge, Lots of dress-up crap that don't make it go any faster. Car Journal http://www.camaro6.com/forums/showthread.php?t=490975 SC build http://www.camaro6.com/forums/showthread.php?t=492656 Drive, Ride, Fly It Like You Stole It GO BIG OR GO HOME

User Name		Remember Me?
Password