04-25-2016, 06:29 AM | #1 |
2016 Brembo Calipers on a 2010 RS
Question that someone hopefully has an answer for. I just put the 6 piston calipers on my 2016 SS. I now have the factory 4 piston ones and my son wants to put them on his 2010 Camaro RS. Do they work? oh and he does have 20 inch wheels on his RS.
|
|
04-25-2016, 06:19 PM | #2 |
Save everyone the time they dont fit. If anyone with a 2016 4 turbo or v6 is looking for a pair of 4 piston brembo's I have a pair with less than 150 miles on them. $1000.00USD PM me.
|
|
04-25-2016, 08:24 PM | #3 |
Drives: 2012 1SS LS3 M6 black on black :) Join Date: May 2012
Location: SD
Posts: 1,342
|
Bummer for your son
__________________
2006 - 46,000 Reliable miles
|
04-26-2016, 02:05 PM | #4 |
Drives: 2017 2SS Join Date: Jun 2014
Location: United States
Posts: 636
|
You can always make an adapter to make them fit. But, it's a bit of trial-and-error work to get it done. Did it on a RX-7 once to fit off-the-shelf Wilwood 4-pistons.
|
04-27-2016, 11:04 AM | #5 | |
Quote:
Really I thought that too, but looked like a fair amount of playing around without knowing how much of a spacer is needed on the hub.... |
||
05-09-2016, 06:49 PM | #6 |
Drives: 2016 camaro lt2 rs Join Date: Feb 2016
Location: buffalo ny
Posts: 137
|
dam wish i had $1000 :/
|
05-09-2016, 07:41 PM | #7 |
Drives: 2016 Camaro 1SS A8 Join Date: Jan 2016
Location: Chatsworth California
Posts: 54
|
What doesn't fit exactly? Doesn't bolt up or offset of caliper vs rotor? Calipers might work with 5th gen brembo rotors.
__________________
2016 1SS A8
7.9 @ 90.79 Stock with a tire 7.20 @ 94.71 LBO getting kicked out Now tuned on E85, CA Performance Test pipes & Circle 4C 3800 stall shooting for low 7's next time out. |
05-09-2016, 08:18 PM | #8 |
Drives: NGM '16 2LT A8 Join Date: Feb 2014
Location: Sin City, NV
Posts: 175
|
Pm me, we may be able to work something out
|
|
|
Post Reply
|
|
|