07-11-2018, 12:19 PM | #85 |
The Milano
Drives: 2017 Firefly ShipWorks Join Date: Jun 2010
Location: Chicagoland (Crown Point, IN)
Posts: 1,877
|
Fixed the slant issue on the HUD - put your wallet in the other back pocket. (JK).
__________________
My first Love. She was called "Miss Carriage" (still cry when I think about her)
383, Muncie 4 speed, custom linkage mated to hurst short throw shifter. |
12-10-2018, 01:46 AM | #86 |
Drives: 2017 2LT Camaro Join Date: Dec 2018
Location: ON
Posts: 3
|
Straight HUD Now Tilts
The HUD in my 2017 Camaro was level when I bought the car in July 2017 but just recently became tilted counter clockwise. I suspect a level HUD replacement would eventually become crooked again after some time had passed.
|
01-03-2019, 05:15 AM | #87 |
L8ap3x
|
I heart you for asking this. I thought it was just me. I'm OCD about shit like that and didn't have the courage to ask anyone. Man it's ever so slight....but enough to where I find myself tilting my head on occasion.
__________________
"Manuals win hearts. Automatics win races."
2018 2SS 1LE HBM 6M |
01-03-2019, 07:02 AM | #88 |
Drives: 2019 GMC Sierra 1500 AT4 Join Date: Nov 2011
Location: Orange, TX
Posts: 740
|
My wife has the exact same HUD in her 2019 Tahoe and there is an option in the settings to clock it. Can rotate it left or right. Wonder if it's a 2019 thing.
__________________
2019 GMC Sierra 1500 AT4
Summit White 6" Lift, 37x13.50R24's |
01-03-2019, 08:11 AM | #89 |
Account Suspended
Drives: 18 1SS/1LE Join Date: Jun 2018
Location: Missouri
Posts: 939
|
My 18 is straight
|
01-03-2019, 08:36 AM | #90 |
Drives: 2017 Camaro SS Join Date: Nov 2018
Location: East Tennessee
Posts: 522
|
Mine has a slight tilt.
It's not critical like the HUD in a fighter jet so I'm still pleased with it.
__________________
Kevin
Luceo Non Uro |
01-06-2019, 03:36 PM | #91 |
Drives: 2017 Fifty RS Convertable Join Date: Dec 2016
Location: Wilton Manors, FL
Posts: 1
|
Has the windshield been replaced in your vehicle? I had to replace the windshield in my car after a rock cracked my windshield. After my windshield was replaced with an aftermarket one by HUD was crooked, was smaller on the left increasing ins size on the right and was blurry due to the image reflecting on both layers of the laminated glass. I repeatedly asked Safelite prior to the installation that this is for car with a HUD. There response was it is the correct windshield for a car with a HUD. After it was replaced I opened a warranty claim immediately and they informed me that due to insure requirements they could not install a OEM windshield until they attempted to install the aftermarket one. They replaced my windshield again a week later with the OEM windshield and now my HUD is normal again.
|
01-06-2019, 05:46 PM | #92 |
Drives: ZL1 1LE SUMMIT WHITE Join Date: Feb 2018
Location: VANCOUVER ISLAND
Posts: 318
|
I just leave mine off...
__________________
2018 ZLE * StudioRSR Half Cage * SkidmarkGarage Rear Seat Delete * ZL1ADDONS Lift Pads * Roto-Fab CAI * Forgestar CF5-V's * Michelin PS4S * Racequip 6 Pt. Harnesses * Sub-strap Brackets by Carmena Performance * Speedhut Shift Light * Leroy Eng. Hidden Hitch (for the TYR RAT)* Gen5DIY Rapid Flash 3rd Brake Light * KOOKS 2" LT * Green Cats * AWE Cat-back Track Edition *
________________________________________ 2005 NISSAN TITAN 1997 BMW E39 (Thug In A Suit) R.I.P. 10/04/18 2002 MAZDA Protege 5 (Time Attack, Hillclimb) SOLD |
04-25-2019, 04:40 PM | #93 |
Drives: 2019 Camaro 2SS A10 Join Date: Feb 2019
Location: San Diego
Posts: 207
|
My 2019 2SS has an option in the DIC to rotate the HUD.
Mine was tilted down on the right and was bugging the shit out of me. I read through this whole thread last week and figured I was just going to have to deal with it. I was screwing around last night and was able to fix it. Stoked!
__________________
2019 2SS: A10, Satin Steel Gray Metallic, MRC, Nav.
|
05-16-2024, 07:32 PM | #94 |
Drives: 2023 Camaro 1SS 1LE M6 Shadow Grey Join Date: Feb 2023
Location: Tehachapi, CA
Posts: 11
|
Fix for Crooked Hud in 2023 Camaro SS
On your dash go to Options. (Picture 1)
Click down to you see the HUD in the dash screen. (Picture 2) Push the right hand right directional button and you'll see the HUD go away and the screen will have Confirm on the bottom click the right directional arrow (Picture 3). Use the Up and Down directional buttons to adjust right and left tilt of the HUD Display on the window. Press Confirm after adjusting the tilt and it'll be set.
__________________
I was hoping to have a 2023 Camaro SS/1LE built. I found this to be hard done than said. I went to Simpson Chevrolet in Garden Grove, CA and they took good care of me! I didn't get the Radiant Red car I wanted built but I was able to get everything on a 2023 Shadow Grey 1SS/1LE. I must admit that I've fallen for the Shadow Grey color too!
|
05-17-2024, 01:58 AM | #95 |
Somewhere in the Kalahari
Drives: 2021/18 (de-fresh) 3LT RS Join Date: Dec 2017
Location: California
Posts: 713
|
Thanks for the "heads up" about this! I was wondering if this was something new, so I checked back at the '21 owners manual and found the instructions hidden away in a corner. Your illustrated explanation makes this excerpt easier to understand!
|
05-17-2024, 07:19 PM | #96 |
Drives: 2023 Camaro 1SS 1LE M6 Shadow Grey Join Date: Feb 2023
Location: Tehachapi, CA
Posts: 11
|
Glad it helped you. I was playing around and found it.
Thanks, Mark Last edited by Cusima55; 05-17-2024 at 07:55 PM. |
09-16-2024, 07:49 PM | #97 |
Drives: 2016 Chevrolet Camaro 2SS Join Date: Feb 2024
Location: Arkansas
Posts: 14
|
mine not tilted but is too far right, if i look directly over center of steering wheel last digit is almost half gone. Lean myself towards door to get it centered in middle of HUD window reflection.
|
09-16-2024, 07:55 PM | #98 |
Drives: 2018 Camaro 2SS A8 Join Date: Jul 2017
Location: East Tennessee
Posts: 12,025
|
It's mildly frustrating that GM never released a software update for 2016-2018 cars to add this option. It's very-very likely a software only feature that is trivial to implement, they just didn't care enough to "retrofit" it.
__________________
2018 Camaro 2SS — G7E MX0 NPP F55 IO6
735 rwhp | 665 rwtq Magnuson TVS 2300 80mm pulley | Kooks 1 7/8" LT headers | JRE smooth idle terminator cam | LT4 FS & injectors | TSP forged pistons & rods JMS PowerMAX | DSX flex fuel kit | Roto-Fab CAI | Soler 95mm LT5 TB | 1LE wheels | 1LE brakes | BMR rear cradle lockout | JRE custom tune 1100 - 1/30/18 | 2000 - 1/31/18 3000 - 2/06/18 TPW 2/26/18 3400 - 2/19/18 | 3800 - 2/26/18 4300 - 2/27/18 | 4B00 - 3/01/18 4200 - 3/05/18 | 4800 - 3/14/18 5000 - 3/16/18 | 6000 - 3/19/18 |
|
|
Post Reply
|
|
|