03-17-2020, 03:03 PM | #1 |
Drives: Chevrolet Camaro Join Date: Mar 2020
Location: Minnesota
Posts: 1
|
How wide can I go with my 2018 ZL1 Tires
I have a 2018 ZL1 not 1LE that I want to put wider tires on the factory 20" rims without it rubbing or having to relocate the wiring harness. Who has went wider with no issues and what did you go with?
|
03-17-2020, 04:04 PM | #2 |
Drives: 2019 ZL-1, Shadow Gray, Sold Join Date: Jan 2019
Location: Fredericksburg, VA
Posts: 1,390
|
You can go 295/30 in front and 315/30 in the rear on the stock wheels. However, you can most likely go bigger if you are using different wheels with different offsets and/or spacers.
|
03-17-2020, 11:33 PM | #3 |
Drives: A10 ZL1 Join Date: Mar 2018
Location: Longview, Texas
Posts: 142
|
I tried to use MT 305/35 20’s but got error messages. I have since relocated the wiring harness and ordered the Toyo88r 315/30/20’s
|
03-18-2020, 06:26 AM | #4 |
Drives: 69 GTO, 05 GTO, 2018 Silver ZL1 Join Date: Jan 2012
Location: Springfield, OH
Posts: 847
|
I have 295/30/20 PS4's in front, and 325/30/20 Sport Cup 2's in the rear on MRR wheels and stock offsets....and No Issues.
|
03-18-2020, 10:15 AM | #5 |
Drives: 2018 ZL1 Camaro 6M Red Hot Join Date: Aug 2013
Location: Cary, NC
Posts: 1,138
|
I am running 315/30-20 on the rear of my 2018 with no issues. I did pull both rears off and check for rubbing or loose wire harnesses. It all looks great.
__________________
People are a lot like slinky's: not very helpful most of the time, but they bring a smile to your face when pushed down the stairs...
|
03-18-2020, 05:05 PM | #6 |
Drives: 2019 2SS Camaro Join Date: Apr 2012
Location: Al
Posts: 834
|
|
03-18-2020, 09:41 PM | #7 |
Drives: 18 ZL1 nightfall grey A10 Join Date: Apr 2018
Location: RGV Texas
Posts: 1,527
|
I’m running 295/30/20 on custom BC wheels in stock front size and 325/30/20 on a 20x11.5” wheel with +41 offset. Fits like a glove
|
03-19-2020, 08:12 AM | #8 | |
Drives: 2019 ZL1 A10 Black Mosaic Join Date: Nov 2018
Location: Pensacola, FL
Posts: 157
|
Quote:
Is your car lowered?
__________________
2019 Black Mosaic ZL1 A10
Kong Ported SC, 2.3 Grip Tec, Roto-Fab Big Gulp, NW103 TB, Mighty Mouse CC, ADM Expansion Tank, ARH 1 7/8 Headers, Catless 3" X-Pipe, Corsa Extreme, Eibach Springs, BMR Cradle Lockout, BMR Trailing/Control arms. Last edited by Fredtp; 03-19-2020 at 08:34 AM. |
|
03-19-2020, 10:57 PM | #9 |
Drives: 18 ZL1 nightfall grey A10 Join Date: Apr 2018
Location: RGV Texas
Posts: 1,527
|
Car is not lowered.
|
05-13-2024, 06:36 PM | #10 |
Drives: 2014 1LE , ZL1-1LE , 1999 WS6 Join Date: Jan 2015
Location: The Compound
Posts: 135
|
Do u all think I can use a 325 30 20 on my 20x11 et43 on my 2017 zl1 ?
|
05-13-2024, 07:09 PM | #11 |
Drives: 2021 Red Hot ZL1 Join Date: Sep 2020
Location: GA
Posts: 3,289
|
I have seen a person on a FB group run a 345 on the rear on the stock wheels. I don't know if I would trust that myself but the owner claims he's never had any issues.
|
05-14-2024, 11:48 PM | #12 |
Drives: 2018 Camaro ZL1 Join Date: Aug 2018
Location: Georgia
Posts: 1,410
|
I dont believe the width has anything to do with the rubbing issue. It's the height.
But it literally takes maybe 10-15 minutes to relocate the harness....... |
|
|
Post Reply
|
|
|