![]() |
#1 |
![]() Drives: 16' Camaro 2SS A8, HBM, MRC Join Date: Oct 2010
Location: N. Las Vegas, NV
Posts: 19
|
Help! Broken MSD PCV
Hello, I was removing my MSD Intake from my old Camaro and I'm not sure when it happened but the PCV was broken in half. Is this able to be fixed or will I have to buy a completely new intake from MSD?
|
![]() |
![]() |
![]() |
#2 |
![]() Drives: Chevrolet Camaro Join Date: Feb 2020
Location: AL
Posts: 52
|
I'm sure there is some way to fix it. Depends on how much is broken off....worst case you could pull or drill out the stub and drill/tap in a metal version.
For example: https://a.co/d/3MNGjyP |
![]() |
![]() |
![]() |
#3 | |
![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Drives: 2017 2SS, 50th pkg, M6, MRC, NPP Join Date: Jan 2016
Location: Ocean City, NJ
Posts: 3,228
|
Quote:
I would seal it with something compatible with plastic. You really don't want to use thread tape with a male metal part going into female plastic as it might crack it. |
|
![]() |
![]() |
![]() |
#4 |
![]() Drives: 16' Camaro 2SS A8, HBM, MRC Join Date: Oct 2010
Location: N. Las Vegas, NV
Posts: 19
|
This is what I was thinking of doing but wasnt sure if I could. Is there a tool to get the PCV nipple off?
|
![]() |
![]() |
![]() |
#5 |
![]() Drives: 2022 SS 1LE Join Date: Aug 2023
Location: Dallas, TX
Posts: 107
|
Have you contacted MSD yet?
|
![]() |
![]() |
![]() |
#6 |
![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Drives: 2017 2SS, 50th pkg, M6, MRC, NPP Join Date: Jan 2016
Location: Ocean City, NJ
Posts: 3,228
|
If this is a threaded fitting, a sprinkler nipple extractor might work. They sell these at Home Depot, Lowe's, harbor freight...
These do tend to scuff up the inner wall of the fitting you are extracting. |
![]() |
![]() |
|
|
Post Reply
|
|
|