09-16-2017, 11:41 AM | #1 |
Drives: 2017 Camaro 2SS Join Date: Aug 2017
Location: Abilene, TX
Posts: 16
|
Complete dash removal?
Has anyone taken their whole dash apart? Mines been rattling and thought I had fixed it with some foam. But the rattle is still there. I found on lethals YouTube channel how easy the front leather piece comes out but haven't found anything on the top side being removed. Assuming it's just held together with a bunch of clips but don't want to start prying or pulling without knowing for sure.
|
09-16-2017, 11:47 AM | #2 |
Why not let the dealer fix the rattle?
I've always feared removing the dash that it will never be the same again after you try to put it back in. |
|
09-16-2017, 11:49 AM | #3 |
Drives: 2017 Camaro 2SS Join Date: Aug 2017
Location: Abilene, TX
Posts: 16
|
Taken vehicles in before for rattles and what not but never had them really fixed at a dealer or they said they can't hear it.
|
09-16-2017, 12:05 PM | #4 |
Drives: 2017 Camaro 2SS, Black/Red Join Date: Mar 2017
Location: San Ramon, CA
Posts: 163
|
The main dash trim itself is simple. At least then you can peek in. I wouldn't go much further than that. Pull the display, pull the dash piece above the glove box and you'll see the remaining screws. It pops off easy. Be gentle with the dust guard around the steering.
|
03-24-2024, 10:24 PM | #5 |
Drives: 2018 Camaro zl1 1le Join Date: Oct 2023
Location: Florida
Posts: 2
|
I tore the entire dash apart and replaced the entire wire harness. Its not that hard.
|
03-25-2024, 11:54 AM | #6 |
Drives: 2017 2SS, 50th pkg, M6, MRC, NPP Join Date: Jan 2016
Location: Ocean City, NJ
Posts: 3,231
|
|
|
|
Post Reply
|
|
|