02-21-2023, 04:28 PM | #1 |
Drives: 2017 Camaro SS Join Date: Nov 2022
Location: Indiana
Posts: 54
|
Texas Speed 1 7/8 Headers rubbing on something when I make a wide turn
Does anyone else have this similar issue that runs texas speed? Or how to fix/ prevent this from happening?
|
02-21-2023, 04:35 PM | #2 |
Drives: 2017 Camaro SS, 2011 Corvette GS Join Date: Feb 2019
Location: Erlanger, Kentucky 41018
Posts: 822
|
You can try to adjust them but likely there is nothing you can do.
I had a set of Texas Speed headers on my 02 Corvette Z06. Were well made, nice welds, etc. But they would rub on the tunnel of the car on left hand turns. It's just not well engineering parts. Some people have not problems but many others do. The solution is to remove them and get some Kooks. |
02-21-2023, 04:47 PM | #3 |
Drives: 2016 1SS NFG A8 Join Date: Aug 2017
Location: 46804
Posts: 6,843
|
Likely hitting the steering shaft. There are a couple options:
1) Use a button head bolt for the steering shaft. 2) If still rubbing, Heat the primary up that is touching and dent it. 3) Loosen motor mounts and use a pry bar to push the engine towards passenger side.
__________________
2016 NFG 1SS A8
Options-2SS Leather/NPP Perf. mods-Whipple 2.9/Fuel System/Flex Fuel/103mm TB/Rotofab Big Gulp/Cat Deletes/Corsa NPP Per. times- 10.5 @ 137 w/ 1.8 60ft Full weight on 20's 1200DA |
02-21-2023, 04:49 PM | #4 | |
Drives: 2017 Camaro SS Join Date: Nov 2022
Location: Indiana
Posts: 54
|
Quote:
|
|
|
|
Post Reply
|
Tags |
headers |
|
|