02-26-2022, 12:02 AM | #1 |
Drives: Camaro ss Join Date: Feb 2022
Location: TX
Posts: 1
|
SS Bumper to Zl1
Can anybody advise me or direct me to the right direction…. What do i need exactly to make my ss front 2017 to a zl1 front bumper … part by part
|
02-26-2022, 09:28 AM | #2 |
Drives: 2018 Camaro 2SS A8 Join Date: Jul 2017
Location: East Tennessee
Posts: 11,696
|
Try asking the OP in this thread: https://www.camaro6.com/forums/showthread.php?t=601046
__________________
2018 Camaro 2SS — G7E MX0 NPP F55 IO6
735 rwhp | 665 rwtq Magnuson TVS 2300 80mm pulley | Kooks 1 7/8" LT headers | JRE smooth idle terminator cam | LT4 FS & injectors | TSP forged pistons & rods JMS PowerMAX | DSX flex fuel kit | Roto-Fab CAI | Soler 95mm LT5 TB | 1LE wheels | 1LE brakes | BMR rear cradle lockout | JRE custom tune 1100 - 1/30/18 | 2000 - 1/31/18 3000 - 2/06/18 TPW 2/26/18 3400 - 2/19/18 | 3800 - 2/26/18 4300 - 2/27/18 | 4B00 - 3/01/18 4200 - 3/05/18 | 4800 - 3/14/18 5000 - 3/16/18 | 6000 - 3/19/18 |
02-26-2022, 09:51 AM | #3 |
Drives: 2022 Chevrolet 1SS 1LE SGM Join Date: Jun 2020
Location: Apex, NC
Posts: 19
|
The ZL1 is wider than the SS. You will need to buy an aftermarket front end designed for the SS with the look of the ZL1.
|
02-26-2022, 11:51 AM | #4 |
Drives: GMC Sierra AT4 Join Date: Jul 2013
Location: Hanover, PA
Posts: 3,292
|
Most buy the aftermarket ZL1 Bumper due to the factory bumper being a little wider & needing spacers added to the front fenders.
__________________
2020 GMC Sierra AT4 6.2L
WTB - 2010 Camaro 1SS or 2SS, Aqua Blue Metallic, A6 |
|
|
Post Reply
|
Tags |
bumper, conversion, front bumper, zl1 |
|
|