01-21-2022, 08:22 AM | #1 |
Drives: 2018 Chevrolet Camaro SS Join Date: Feb 2021
Location: Mansfield
Posts: 4
|
2018 Camaro SS - Fitting DRLs...
Hi all,
I am in the process of turning my 2019 (2018 MY) EU-spec SS back into the car it SHOULD be. Having done the easy bit (badges!) I'm now working on adding the lower grille DRLs. I have a set of these plus wiring looms (from GEN5DIY) but what I don't have is mounting hardware. Can someone advise what is needed please? Thanks!! Chris |
01-21-2022, 02:20 PM | #2 |
UK2019
Drives: Camaro 2017 2ss/eu spec convertible Join Date: Mar 2019
Location: Uk
Posts: 100
|
Drl hardware
Hi. I added the drls (and side marker lights) to my eu spec camaro. In addition to the wiring you'll just need 3 bolts per light. They weren't supplied with the lights I bought but I had some laying around from previous cars (sorry I don't have the specs of length diameter or pitch). The holes in the bumper are already threaded and ready to take the hardware.
|
01-25-2022, 09:10 AM | #3 |
Drives: 2018 Chevrolet Camaro SS Join Date: Feb 2021
Location: Mansfield
Posts: 4
|
Thanks!! Can anyone provide the part numbers for the bolts so that I can order the correct ones?
|
01-25-2022, 01:58 PM | #4 |
Long hauler
|
https://www.gmpartsdirect.com/v-2018...amp-components
#2 is the bolt, get three of them and maybe even #3 depending on if you have them or not
__________________
2022 2SS 1LE - Window Sticker - Cold Air Inductions Elite Carbon CAI
2016 1LT v6 - Totaled Happiness: Infinite |
01-29-2022, 11:57 AM | #5 |
Drives: 2018 Chevrolet Camaro SS Join Date: Feb 2021
Location: Mansfield
Posts: 4
|
Awesone - thank you!!
|
|
|
Post Reply
|
|
|