09-21-2020, 07:40 PM | #1 |
Drives: 2016 Camaro 2SS, NPP, A8, FBO, E85 Join Date: Oct 2016
Location: Springfield,VA
Posts: 884
|
ATI U/D pulley on 6th Gen Camaro SS
What’s up y’all? As the title states, how many have done a ATI U/D pulley on their 6th Gen Camaro SS? How hard was the installer and what was required to get it to directly bolt on? Any help is appreciated. Thanks all
__________________
Well............ At least you tried. lol
|
09-22-2020, 12:39 AM | #2 |
Drives: like an old lady Join Date: Jun 2012
Location: indiana
Posts: 2,455
|
i'm doing one this weekend. i'll post up when it's done. i plan on using the napa 060560 belt and arp bolt.
__________________
2016+ camaro: everyone’s first car
|
09-22-2020, 09:07 AM | #3 |
Drives: 21 SS Join Date: Oct 2017
Location: Dallas
Posts: 331
|
ati pulley
I have 1 brand new, I won't be using right now I'll sell you
__________________
|
09-22-2020, 07:15 PM | #4 |
Drives: 17 garnet red 2ss vert Join Date: Apr 2018
Location: Highland Village, Tx.
Posts: 45
|
|
09-22-2020, 09:18 PM | #5 |
Drives: 6th gen Join Date: Aug 2013
Location: US
Posts: 3,710
|
Air impact gun, breaker bar, if you’re auto, the locking thing that goes on the starter, and a torch
There’s no glory in this mod but it’s a good one
__________________
‘22 2SS 1LE M6 Summit White - RF, Flexfuel, LT2 intake, 95mm tb, ATI udp, VT ramair, full 28” dragpack - 11.68@122
‘16 1SS M6 LT2 intake + boltons on DR 11.0@126+ (Sold) |
09-22-2020, 09:18 PM | #6 | |
Drives: 2016 Camaro 2SS, NPP, A8, FBO, E85 Join Date: Oct 2016
Location: Springfield,VA
Posts: 884
|
Quote:
What about the bolts? I wanna know which bolts I need to buy. Sent from my iPhone using Tapatalk
__________________
Well............ At least you tried. lol
|
|
09-22-2020, 10:59 PM | #7 |
Drives: 21 SS Join Date: Oct 2017
Location: Dallas
Posts: 331
|
Man sold it earlier
__________________
|
09-23-2020, 07:14 AM | #8 | |
Drives: 2018 Camaro SS A8 "Dark Knight" Join Date: Oct 2019
Location: MICHIGAN
Posts: 226
|
Quote:
After taking the balancer off re use the original bolt to install new balancer then remove said old bolt and re torque with new balancer bolt preferably ARP.
__________________
DARK KNIGHT
2018 SS A8 11.37 @ 121.01 GPI Tuned E85 Nitto tires Roto Fab CAI MSD intake |
|
09-23-2020, 08:25 AM | #9 |
Drives: 2022 Lt1 A10 Join Date: Nov 2015
Location: clark, mo
Posts: 8,873
|
Just buy a new GM bolt at your local dealership
__________________
2022 Lt1 6.2 A10, Maggie 2300, THPSI Port Inj/10 rib, Rotofab, E, Nickey, SCOL, Griptech, RC Bandits, Hoosiers/MT 9.80@142.96 1.44 60ft, 6.34@112 707/669 RWHP/TRQ. 16SS Maggie 2650 9.41@147 1.35 60ft, 5.99@119. 16 C7 A8 10.90@128 Bolt on stuff
|
09-23-2020, 08:30 AM | #10 |
Drives: 2018 Camaro SS A8 "Dark Knight" Join Date: Oct 2019
Location: MICHIGAN
Posts: 226
|
Just make sure you use a new bolt for final install and torque
__________________
DARK KNIGHT
2018 SS A8 11.37 @ 121.01 GPI Tuned E85 Nitto tires Roto Fab CAI MSD intake |
09-23-2020, 12:00 PM | #11 |
Drives: 2016 Camaro 1SS Hyper Blue Metallic Join Date: Jun 2015
Location: TN
Posts: 49
|
Enjoy that stretch to fit belt install though.
__________________
"Ask not what the camaro can do for you but what you can do with your camaro."
|
09-23-2020, 12:49 PM | #12 |
Drives: like an old lady Join Date: Jun 2012
Location: indiana
Posts: 2,455
|
also: the stock bolt will not fit without grinding part of it off, the ati hub is too narrow.
__________________
2016+ camaro: everyone’s first car
|
09-23-2020, 01:18 PM | #13 | |
Drives: 2016 Camaro 2SS, NPP, A8, FBO, E85 Join Date: Oct 2016
Location: Springfield,VA
Posts: 884
|
Quote:
So what did you end up doing then? Sent from my iPhone using Tapatalk
__________________
Well............ At least you tried. lol
|
|
09-23-2020, 05:35 PM | #14 |
Drives: 2016 Camaro 2SS, NPP, A8, FBO, E85 Join Date: Oct 2016
Location: Springfield,VA
Posts: 884
|
The original bolt or the ARP bolt?
Sent from my iPhone using Tapatalk
__________________
Well............ At least you tried. lol
|
|
|
Post Reply
|
|
|