What did you do to your 6th Gen Camaro today?! - Page 547

NEGXXIS · 11-21-2019, 08:02 AM

This past weekend I installed OEM ZL1 side rockers, my MRR 228 wheels, and wrapped my hood in Matte Magnetic Black

bobby35ny · 11-21-2019, 09:34 AM

Quote:

Originally Posted by ItsChristianInHD

Hell yeah! I’m procrastinating on plates and my license since mine are good till March and the Florida ones are pricey!

Get that FL license ASAP!!!
Saves a TON on homestead.
-bobby

dmcmahan60 · 11-21-2019, 10:38 AM

Put some yellow overlays on my lower DRL’s to change the look a little bit.

CUPRA · 11-21-2019, 05:25 PM

This past weekend it was beautiful out, so had the chance to wash the Camaro and install the ZL1Addons Bodykit. My wife ordered the side skirts and rear elements as I already had the GM front splitter.

Install was incredibly easy, and I had everything on, by myself in about an hour and a half. 30 mins for the rear pieces, and then 30 mins each side. I decided to put automotive adhesive tape along the side skirts before riveting them to the underside of the car. That made the install so much easier, as it held them in place while drilling and riveting.

I also bought a 90º angle drill bit adapter which meant I could put them on without jacking up the car at all. Really easy.

Haven't seen many photos of the kit installed, so here are a few. Enjoy. It's a nice, subtle look, without me trying to make my 2LT look like something it's not!

madscotsman · 11-22-2019, 08:51 AM

Quote:

Originally Posted by dmcmahan60

Put some yellow overlays on my lower DRL’s to change the look a little bit.

Pics??? I bought these a while ago but they're sitting on my workbench

ItsChristianInHD · 11-22-2019, 12:08 PM

Quote:

Originally Posted by bobby35ny

Get that FL license ASAP!!!
Saves a TON on homestead.
-bobby

Hahah I definitely am planning on it! I gotta get my insurance switched too. I want my oranges on my plate!

Venda · 11-22-2019, 03:11 PM

Threw on some smoked side markers, really cleans up the look over the red and orange. Nice and bright too!

ItsChristianInHD · 11-22-2019, 06:37 PM

Quote:

Originally Posted by CUPRA

This past weekend it was beautiful out, so had the chance to wash the Camaro and install the ZL1Addons Bodykit. My wife ordered the side skirts and rear elements as I already had the GM front splitter.

Install was incredibly easy, and I had everything on, by myself in about an hour and a half. 30 mins for the rear pieces, and then 30 mins each side. I decided to put automotive adhesive tape along the side skirts before riveting them to the underside of the car. That made the install so much easier, as it held them in place while drilling and riveting.

I also bought a 90º angle drill bit adapter which meant I could put them on without jacking up the car at all. Really easy.

Haven't seen many photos of the kit installed, so here are a few. Enjoy. It's a nice, subtle look, without me trying to make my 2LT look like something it's not!

What did you use to paint the bow ties in the center of the wheels? Love the look.

caSStro18 · 11-22-2019, 06:47 PM

Quote:

Originally Posted by ItsChristianInHD

What did you use to paint the bow ties in the center of the wheels? Love the look.

I’m not sure what this owner did to make the bow ties black, but I did the same with vinyl. I made a template and cut them out myself with a vinyl cutting machine.

Vtor_ZL1 · 11-22-2019, 08:32 PM

Squeezed in one last autox for 2019 on Blizzaks.. it was hilariously slidey.

ItsChristianInHD · 11-22-2019, 10:41 PM

Quote:

Originally Posted by caSStro18

I’m not sure what this owner did to make the bow ties black, but I did the same with vinyl. I made a template and cut them out myself with a vinyl cutting machine.

Oh nice. might do that...looks sick.

Chris C 1SS 1LE · 11-23-2019, 10:09 AM

Put the fuse box cover plate from Chris F. On. He does nice work.

Uk2019 · 11-24-2019, 09:49 AM

As some of you may know, the eu spec camaros are all 2ss spec but don't have any ss badging. In addition to adding the exterior badges, found this on aliexpress for the steering wheel. Before and after shots. Thoughts....?

Chevyfan4life · 11-24-2019, 12:08 PM

Quote:

Originally Posted by Chris C 1SS 1LE

Put the fuse box cover plate from Chris F. On. He does nice work.

You can't just tell us.We need pictures of Chris's nice work.

11-21-2019, 08:02 AM	#7645
NEGXXIS Drives: 2019 Camaro SS A10 Join Date: May 2009 Location: Tempe, Arizona Posts: 1,062 View My Garage	This past weekend I installed OEM ZL1 side rockers, my MRR 228 wheels, and wrapped my hood in Matte Magnetic Black __________________ 2020 Range Rover Sport HSE P525 Supercharged 5.0 - Firenze Red - 9012 wheels SOLD 2019 Camaro SS -Wrapped in Matte Magnectic Black - Anderson Carbon Hood and Rear Spoiler – Ikon front spoiler – OEM ZL1 Side Rockers - ZL1 Addons Diffuser - BMR 1.0” Lowering Springs - MRR 228 Wheels 20x10 and 20x11 RIP 2016 Camaro SS https://www.camaro6.com/forums/showthread.php?t=565453 SOLD 2010 Camaro SS Featured in GM High Tech Performance and Camaro Now Magazines - http://www.superchevy.com/features/g...of-perfection/

11-21-2019, 10:38 AM	#7647
dmcmahan60 Drives: 2017 SS Join Date: Jan 2018 Location: Arab, AL Posts: 759 View My Garage	Put some yellow overlays on my lower DRL’s to change the look a little bit. Attached Images Last edited by dmcmahan60; 11-22-2019 at 09:19 AM.

11-21-2019, 05:25 PM	#7648
CUPRA Drives: '21 Bronco OBX/'18 Jeep GC Altitude Join Date: Jul 2008 Location: Keller, TX Posts: 1,413 View My Garage	Installed ZL1Addons Bodykit This past weekend it was beautiful out, so had the chance to wash the Camaro and install the ZL1Addons Bodykit. My wife ordered the side skirts and rear elements as I already had the GM front splitter. Install was incredibly easy, and I had everything on, by myself in about an hour and a half. 30 mins for the rear pieces, and then 30 mins each side. I decided to put automotive adhesive tape along the side skirts before riveting them to the underside of the car. That made the install so much easier, as it held them in place while drilling and riveting. I also bought a 90º angle drill bit adapter which meant I could put them on without jacking up the car at all. Really easy. Haven't seen many photos of the kit installed, so here are a few. Enjoy. It's a nice, subtle look, without me trying to make my 2LT look like something it's not! __________________ Order Placed: 04/30/22 Order Accepted: 10/18/22 TPW: 11/07/22 Built: 11/18/22 VIN received: 11/19/22 On a Train: 02/27/23 ETA: TBD 2023 Camaro 2SS Convertible/M6/Shadow Grey Metallic/Adrenaline Red Interior/Carbon Flash Wheels/NPP

11-22-2019, 03:11 PM	#7651
Venda 2016 Camaro 2ss Drives: 2016 Camaro 2ss Join Date: Nov 2019 Location: CT Posts: 2 View My Garage	Threw on some smoked side markers, really cleans up the look over the red and orange. Nice and bright too! Attached Images __________________ 2016 Camaro 2ss Smoked Side Signals Nitto N555 NPP Exhaust Whipple Supercharger 510whp 516t Rotofab CAI

11-22-2019, 08:32 PM	#7654
Vtor_ZL1 Who Needs to KNOW? Drives: 18 ZLE Join Date: May 2018 Location: Left Side of the Moon Posts: 1,770	Squeezed in one last autox for 2019 on Blizzaks.. it was hilariously slidey. __________________ ing for grip. Are you in the NY/NJ/PA/CT region? Join us for autox fun at MetLife Stadium. HUGE lots, tons of runs. http://www.motorsportsne.com/

11-23-2019, 10:09 AM	#7656
Chris C 1SS 1LE Drives: 2017 1LE Join Date: Nov 2017 Location: Brooks, GA Posts: 697	Put the fuse box cover plate from Chris F. On. He does nice work. __________________ '17 Bright Yellow 1LE. PDR, STB, !CAGS Borla 60606, 11925. Tony Mamo ported TB, ROTOFAB, !Sound Tube

11-24-2019, 09:49 AM	#7657
Uk2019 UK2019 Drives: Camaro 2017 2ss/eu spec convertible Join Date: Mar 2019 Location: Uk Posts: 100	As some of you may know, the eu spec camaros are all 2ss spec but don't have any ss badging. In addition to adding the exterior badges, found this on aliexpress for the steering wheel. Before and after shots. Thoughts....? Attached Images

User Name		Remember Me?
Password