04-21-2019, 02:30 PM | #1 |
Dyno Show Queen LOL
Drives: 16 SS & 17 ZL1 Both Yellow Join Date: Jan 2014
Location: Houston
Posts: 4,345
|
Offset for ss and zl1
I was looking at some wheels that are:
19x10.5 23mm offsets 19x11.0 38mm offsets Will these work with 6 gen ZL1 and SS? I was told the 38 will not work.. but 43mm do.. I have ran 19x10 27mm square on my zl1 one before w 305s all around..and a 5 mm spacer in front. So I'm wondering why a 38mm offset do not.. Can someone explain why? Or can anything be done? Thanks.
__________________
Kong Ported 2650, Crawford Racing Port Injection, Weapon X 112mm Adapter, NW112mm TB, Livernois Ported LT4 Heads, Lingenfelter GT32 stealth cam, Haltech Elite, and Carbon by Trufiber Last edited by EDFHOBBIES; 04-21-2019 at 03:37 PM. |
04-21-2019, 03:18 PM | #2 |
SABIO
Drives: 2016 CAMARO 1SS Join Date: Jul 2015
Location: Bradford, ON
Posts: 5,012
|
38mm would be perfect.
11" wide is generally 43mm. That 38 only brings it out 5mm more. 35mm would be tops...
__________________
|
04-21-2019, 03:42 PM | #3 |
Dyno Show Queen LOL
Drives: 16 SS & 17 ZL1 Both Yellow Join Date: Jan 2014
Location: Houston
Posts: 4,345
|
Ok ty..
Are you saying that 38mm will stick out side the fender just 5mm more than if I ran 43mm offset using the same 19x11 rim? And no clearance issues or rubbing fender liner ? I think I get what your saying because when I had the 27mm tsw 19x10 w 305s on back they stuck out quite a bit.. nothing stupid
__________________
Kong Ported 2650, Crawford Racing Port Injection, Weapon X 112mm Adapter, NW112mm TB, Livernois Ported LT4 Heads, Lingenfelter GT32 stealth cam, Haltech Elite, and Carbon by Trufiber |
04-21-2019, 05:31 PM | #4 |
SABIO
Drives: 2016 CAMARO 1SS Join Date: Jul 2015
Location: Bradford, ON
Posts: 5,012
|
I don't think it would be outside the fender.
A 1LE 20x11 is 43mm and it is slightly inside the fender. Rubbing would be caused by a tall tire. Keep it at 27" diameter.
__________________
|
04-21-2019, 11:36 PM | #5 |
Drives: SS-6-SPD Join Date: Jan 2017
Location: New Jersey
Posts: 1,369
|
Im running 20x11 + 37 with 305/35 on my rear with 0 issues
Car is also lowered via eibach springs (1SS) |
04-22-2019, 01:26 PM | #6 |
Dyno Show Queen LOL
Drives: 16 SS & 17 ZL1 Both Yellow Join Date: Jan 2014
Location: Houston
Posts: 4,345
|
ok ty Im going pull the trigger
__________________
Kong Ported 2650, Crawford Racing Port Injection, Weapon X 112mm Adapter, NW112mm TB, Livernois Ported LT4 Heads, Lingenfelter GT32 stealth cam, Haltech Elite, and Carbon by Trufiber |
|
|
Post Reply
|
|
|