11-12-2018, 02:29 PM | #211 |
Received mine this morning
|
|
11-12-2018, 03:58 PM | #212 |
Wisconsin Camaro Pres.
Drives: '17 Camaro ZL1 Join Date: Feb 2017
Location: East Troy, WI
Posts: 55
|
E-mail sent to ACS! Awaiting response.
|
11-12-2018, 04:20 PM | #213 |
Wisconsin Camaro Pres.
Drives: '17 Camaro ZL1 Join Date: Feb 2017
Location: East Troy, WI
Posts: 55
|
Response received - Order confirmed!
|
11-12-2018, 04:22 PM | #214 |
Drives: 18 Tahoe RST, 19 Z06 Join Date: Apr 2017
Location: Colorado Springs, CO
Posts: 327
|
|
11-12-2018, 04:40 PM | #215 |
Drives: 2018 ZL1 Mosaic Black A10 Join Date: Jun 2018
Location: Alabama
Posts: 34
|
Email sent, waiting on reply.
|
11-12-2018, 05:23 PM | #216 |
Drives: 2018 ZL1 Mosaic Black A10 Join Date: Jun 2018
Location: Alabama
Posts: 34
|
Ordered.
|
11-12-2018, 07:19 PM | #217 |
Drives: 2018 ZL1 A10 Join Date: May 2012
Location: British Columbia, Canada
Posts: 1,372
|
List updated.
Please check list to see if info is correct.
__________________
DAVENPORT STAGE 2 PLUS - 2" ARH ceramic coated headers - 3" ARH catless exhaust - Stock NPP mufflers - Kong ported SC - Katech 103 ported TB - Rotofab 5" Big gulp CAI - 22.5% lower pulley - ATI Harmonic balancer - Cordes SC expansion tank - MSD hi temp ignition wires - Koolsox spark plug insulators - custom tunes - 660hp/725tq pump - 713hp/763tq race
|
11-12-2018, 08:57 PM | #218 |
Drives: Gen V Viper GTS Join Date: Jan 2018
Location: SoCal
Posts: 260
|
Does installation of the fronts or the rears require drilling new holes or does it used existing holes with the same or different hardware?
Thank you for your responses! |
11-12-2018, 09:28 PM | #219 |
Drives: 2018 Camaro ZL1 G7Q Join Date: Dec 2016
Location: Fort Huachuca, AZ
Posts: 25
|
Email sent, reply received, and ordered!
__________________
“Only two defining forces have ever offered to die for you; Jesus Christ and the American Soldier. One died for your soul; the other for your freedom.” author unknown
|
11-12-2018, 10:22 PM | #220 | |
Quote:
I will look at alternatives that allow me to more easily remove them at will. Perhaps wel nuts, threaded crush inserts or most likely tinnerman nuts as they are very flat and won’t raise the guards off the liner enough to make any difference in fit and will be very secure, even more so than their rivets, they will just require a small slit in the liner where they’ll slip in. |
||
11-19-2018, 12:54 PM | #221 |
Drives: 2018 ZL1 A10 Join Date: May 2012
Location: British Columbia, Canada
Posts: 1,372
|
Anyone else ready to order fronts? Lets get this done !!
__________________
DAVENPORT STAGE 2 PLUS - 2" ARH ceramic coated headers - 3" ARH catless exhaust - Stock NPP mufflers - Kong ported SC - Katech 103 ported TB - Rotofab 5" Big gulp CAI - 22.5% lower pulley - ATI Harmonic balancer - Cordes SC expansion tank - MSD hi temp ignition wires - Koolsox spark plug insulators - custom tunes - 660hp/725tq pump - 713hp/763tq race
|
11-19-2018, 01:32 PM | #222 |
Drives: 2017 SS 1LE Join Date: Mar 2016
Location: Monterey, CA
Posts: 2,480
|
I have the OEM ZL1 rockers on my SS 1LE, I'm going to email them to get a set of fronts though I don't need the rears.
__________________
IG: @NC_M1SS1LE
|
11-19-2018, 02:36 PM | #223 |
Bannable
|
Received my fronts today
__________________
One must forego the self to attain total spiritual creaminess, and avoid the chewy chunks of degradation
2017 ZL1 A10 - Hyper Blue Metallic Rotofab CAI, TM ported TB, AWE non res touring catback with PLP's |
11-19-2018, 02:55 PM | #224 | |
Drives: Grandad's C2 L89 Join Date: May 2017
Location: 20*51.50N 156*29.60W
Posts: 1,711
|
Quote:
DANACO, Great ideas on fittment, thanks. I'm interested in your opinions on the alternative fitment option that you have chosen. Can you post a pic or two? Thanks in advance.
__________________
2018 ZL1 1LE sw/PDR
|
|
|
|
Post Reply
|
|
|