04-03-2018, 08:29 PM | #1 |
Drives: 2017 Garnet Red 1LE Join Date: May 2014
Location: South Charlotte
Posts: 117
|
Quick Jack 5000 on 6Gen
Has anyone used the quick jack 5000 on their gen 6 Camaro? I used it on my gen 5 without a hitch. I am having trouble lining up the jack points with the jack. I suppose i need to get the jack pads to make it usable? any thoughts?
__________________
New Camaro --- 2017 SS 1LE Garnet Red -stock
Last Camaro --- 2014 2SS || 6 speed || NPP || Kooks 1 7/8 LT +Cats || Apex Catch Can || BW PTB || CAI induction || 12.99 @ 111 stock tires, 2.1 60' Old Camaro --- 94 Z28 Vert-- Miss it. |
04-03-2018, 08:51 PM | #2 | |
Drives: 2017 2SS Manual Join Date: Apr 2017
Location: Atlanta GA
Posts: 373
|
What model do you have? If the regular 5000 BLX and you use it with the existing lift points the car will be way to nose heavy and very unsafe - do not do this!
There are a few options, you can get these extenders (I would verify that they will solve the problem by doing a few measurements first though) Or you can buy the 5000 EXT frame assemblies Or you can do what I did and use a dremmel to cut new notches in the underbody. The pinch points extend all the way under the doors & you can lift safely using the new point and the original ones closer to the front wheel. The notches are not visible unless you are under the car The extenders were not available at the time or I would probably have went that route before cutting the new notches |
|
04-03-2018, 09:20 PM | #3 |
Drives: 2017 Garnet Red 1LE Join Date: May 2014
Location: South Charlotte
Posts: 117
|
Thanks for the info. I don't think the 6 total inches will allow it reach the jack points. I didn't know that the pinch points extend. This will help, I may make the small notches you mentioned if it comes to that. I did just purchase the ZL1 add-ons jack pads as well.
__________________
New Camaro --- 2017 SS 1LE Garnet Red -stock
Last Camaro --- 2014 2SS || 6 speed || NPP || Kooks 1 7/8 LT +Cats || Apex Catch Can || BW PTB || CAI induction || 12.99 @ 111 stock tires, 2.1 60' Old Camaro --- 94 Z28 Vert-- Miss it. |
04-03-2018, 09:30 PM | #4 |
Drives: 18 2SS 1LE, 20 Canyon Denali Join Date: Feb 2016
Location: Windsor, ON
Posts: 488
|
I have a 7000 ext, no issue reaching the lift points. The standard length models would be too short. My understanding is the extensions bars make the standard model as long as an ext so it should work
__________________
Mike
Current Garage: 18' 2SS 1LE, Hyper Blue 23' GMC Canyon Denali Previously: 20' GMC Canyon Denali 16' 2SS 6MT, Hyper Blue, Kalahari, 20" PVW Chrome Split wheels, NPP, MRC (Total Loss) 14' Ford Edge Sport 06' Saab 9-7x,13' Nissan 370z Sport, 12' VW Jetta GLI, 02' Olds Bravada |
04-03-2018, 09:35 PM | #5 |
Drives: 17 SS 1LE, 02 GTP Join Date: Jan 2017
Location: KS
Posts: 44
|
I use mine and have no problems. I use the notches under the door, not the front ones by the wheel.
__________________
2017 Mosaic Black Metallic 1LE
|
04-03-2018, 09:55 PM | #6 | |
Drives: 2017 Garnet Red 1LE Join Date: May 2014
Location: South Charlotte
Posts: 117
|
Quote:
How is the stability. It was mentioned that it would be unstable at these points.
__________________
New Camaro --- 2017 SS 1LE Garnet Red -stock
Last Camaro --- 2014 2SS || 6 speed || NPP || Kooks 1 7/8 LT +Cats || Apex Catch Can || BW PTB || CAI induction || 12.99 @ 111 stock tires, 2.1 60' Old Camaro --- 94 Z28 Vert-- Miss it. |
|
04-03-2018, 10:32 PM | #7 |
Drives: 17 SS 1LE, 02 GTP Join Date: Jan 2017
Location: KS
Posts: 44
|
I have no problems with it like this.
__________________
2017 Mosaic Black Metallic 1LE
|
04-04-2018, 05:25 AM | #8 |
Drives: 2018 Hyper Blue 1SS 1LE Join Date: Sep 2014
Location: Raleigh, NC
Posts: 198
|
Received the 5000 SLX for Christmas and it's too short to reach the factory recommended lift points. Ordered the extensions on 1/8/18 and I only received 1 (should be a pair) about 2 weeks ago. Since then they have removed them from their website and I received a $70 credit for all the BS they are putting me thru. Still waiting on the second extension.
I have the ZL1 add-on lift points and the QuickJack pinch weld blocks. With everything I have I hope to be at a comfortable place to lift the car once the other extension arrives. Glad to see it being used on the 6 Gen! |
04-04-2018, 08:37 AM | #9 |
Drives: MB 1SS Join Date: May 2017
Location: Easton, PA
Posts: 321
|
|
04-04-2018, 09:29 AM | #10 |
Drives: 2000 GMPPSV SS & 2017 ILE SS Join Date: Jul 2017
Location: Bartlett, IL
Posts: 547
|
I really want one of these but..... I'm still trying to decide between one of these lifts or a Springfield Armory M1A. I just can't decide.
|
04-04-2018, 09:36 AM | #11 |
Drives: 2018 2ss Join Date: Feb 2018
Location: USA
Posts: 83
|
|
04-04-2018, 09:46 AM | #12 |
Drives: 2000 GMPPSV SS & 2017 ILE SS Join Date: Jul 2017
Location: Bartlett, IL
Posts: 547
|
|
04-04-2018, 09:51 AM | #13 |
I used to be Dragoneye...
|
Well! There's your answer...put the jack and stands on craigslist to earn a deposit towards the M1A!
|
04-04-2018, 09:28 PM | #14 |
Drives: 17 SS 1LE, 02 GTP Join Date: Jan 2017
Location: KS
Posts: 44
|
__________________
2017 Mosaic Black Metallic 1LE
|
|
|
Post Reply
|
|
|