You are browsing camaro6 
01-20-2020, 07:58 PM
|
#1 |
 
Drives: 2017 TT ZL1 TH400 Join Date: Dec 2018
Location: City Of Angels
Posts: 356
|
Cordes Front Bumper Ice Tank and Cordes Breather tank
Looking for install threads on routing and how to for the two items in description. I am trying to accomplish this myself and I feel I'm mechanically inclined so I just need a little insight on routing the lines 2 and from. If you have step by step would be great or just some pictures would also help. Thanks..
__________________
2017 TT Camaro ZL1 / TH400 / LME 416 / LME CID HEADS / Huron TT 68/71 106 / Crawford Port Injection / Holley EFI / AEROSPACE Components fronts and rears / 15" Weld Beadlocks / Torqbyte Methanol Kit / Prometh Trunk Tank / Plazmaman Intake
|
|
|
|
01-20-2020, 09:12 PM
|
#2 |
|
Drives: 2022 Lt1 A10 Join Date: Nov 2015
Location: clark, mo
Posts: 8,882
|
I'd rather have the tank in the trunk.
|
|
|
|
|
01-20-2020, 10:09 PM
|
#3 |
|
Drives: 2017 TT ZL1 TH400 Join Date: Dec 2018
Location: City Of Angels
Posts: 356
|
Lol.. yeah I agree. I'm using it for more volume not for ICE. I been talking your fast guy over here in California Mike and he has stated the same. But for now any help. I found the way to run the passenger side fitting to the SC but concerned on running the driver side to the pump. Help a member out. Thanks
__________________
2017 TT Camaro ZL1 / TH400 / LME 416 / LME CID HEADS / Huron TT 68/71 106 / Crawford Port Injection / Holley EFI / AEROSPACE Components fronts and rears / 15" Weld Beadlocks / Torqbyte Methanol Kit / Prometh Trunk Tank / Plazmaman Intake
|
|
|
|
|
01-21-2020, 08:58 AM
|
#4 |
|
Dyno Show Queen LOL
Drives: 16 SS & 17 ZL1 Both Yellow Join Date: Jan 2014
Location: Houston
Posts: 4,354
|
Can U route the hoses up from the bottom going through the deflectors on the sides of the radiator/exchanger? It may take you sourcing some barbed Heater hose connectors and Gate hose along with pre-made elbows to make the bends. Orilley's allowed me to go in the back and they had 1000s of hoses in 5/8 and 3/4 elbows, S bends, 5/8 to 3/4 hose tapered.. added a pic of the deflectors like the aftermarket SC companies have you go through to add and exchanger.
__________________
 Kong Ported 2650, Crawford Racing Port Injection, Weapon X 112mm Adapter, NW112mm TB, Livernois Ported LT4 Heads, Lingenfelter GT32 stealth cam, Haltech Elite, and Carbon by Trufiber |
|
|
|
|
01-21-2020, 11:28 AM
|
#5 |
|
Drives: 2017 TT ZL1 TH400 Join Date: Dec 2018
Location: City Of Angels
Posts: 356
|
EDFHOBBIES thank you for the illustration. I'll go check it out. I'm sure there is a way with the supplied hose and fittings. They sent me a 90 degree for the passenger side but on the driver side I recieved an straight fitting. But nonetheless I appreciate your help and thanks again. I'll email Joe at Cordes and see if they can send me install pictures.
__________________
2017 TT Camaro ZL1 / TH400 / LME 416 / LME CID HEADS / Huron TT 68/71 106 / Crawford Port Injection / Holley EFI / AEROSPACE Components fronts and rears / 15" Weld Beadlocks / Torqbyte Methanol Kit / Prometh Trunk Tank / Plazmaman Intake
|
|
|
|
|
01-21-2020, 12:06 PM
|
#6 |
|
Dyno Show Queen LOL
Drives: 16 SS & 17 ZL1 Both Yellow Join Date: Jan 2014
Location: Houston
Posts: 4,354
|
No problem..
__________________
Kong Ported 2650, Crawford Racing Port Injection, Weapon X 112mm Adapter, NW112mm TB, Livernois Ported LT4 Heads, Lingenfelter GT32 stealth cam, Haltech Elite, and Carbon by Trufiber |
|
|
|
|
|
|
|
|
Post Reply
|
| Thread Tools | |
|
|
