2017 Camaro A8 bolt on’s dyno

Camarols6 · 06-23-2018, 11:06 AM

Finally got the car tuned after installing some mods. Numbers seem kinda low... 432hp 455tq. DA was 2700, temp was 75 degrees and 88% humidity. what do you guys think?

Mods:
2” ARH long system with no cats
Hooker black heart axleback
RotoFab CAI with dry filter
Ported throttle body
Ported intake

ULTRAZLS1 · 06-23-2018, 11:49 AM

that's about right if they used 5th gear instead of 6th and you are on 93 not e85

BradfordCamaro · 06-23-2018, 12:18 PM

I look at those mods and think +40hp.
So your baseline was probably 390s.

Normal. All good.

Not sure why your TQ drops like a rock just before 5K?

Camarols6 · 06-23-2018, 12:29 PM

So this is normal for a 5th gear pull?

danhr · 06-23-2018, 12:32 PM

Can't tell if we dont if a correction factor was used, andif so, which one.

SAE and STD correction takes DA mostly put of the equation and makes it easier to compare dyno runs.

KingLT1 · 06-23-2018, 01:27 PM

5th gear pull is 25whp less, so you would be 455-460whp in 6th, then add E85 and you would be 480-485whp. Sounds spot on imo.

Camarols6 · 06-23-2018, 01:47 PM

Tuner said it was a 6th gear pull but in the vid I took I only counted him going into 5th. So if it’s a 6th gear pull it sounds a little off.

06-23-2018, 11:06 AM	#1
Camarols6 Drives: 2017 camaro 2ss Join Date: Dec 2017 Location: Newnan, Ga Posts: 14	2017 Camaro A8 bolt on’s dyno Finally got the car tuned after installing some mods. Numbers seem kinda low... 432hp 455tq. DA was 2700, temp was 75 degrees and 88% humidity. what do you guys think? Mods: 2” ARH long system with no cats Hooker black heart axleback RotoFab CAI with dry filter Ported throttle body Ported intake

06-23-2018, 12:18 PM	#3
BradfordCamaro SABIO Drives: 2016 CAMARO 1SS Join Date: Jul 2015 Location: Bradford, ON Posts: 5,014	I look at those mods and think +40hp. So your baseline was probably 390s. Normal. All good. Not sure why your TQ drops like a rock just before 5K? __________________

06-23-2018, 12:32 PM	#5
danhr BAMF SS Drives: 2016 Camaro 1SS A8 Join Date: Mar 2010 Location: Ford City, PA Posts: 3,024	Can't tell if we dont if a correction factor was used, andif so, which one. SAE and STD correction takes DA mostly put of the equation and makes it easier to compare dyno runs. __________________ 2016 1SS A8: FBO + Circle D + P1X + Meth + Tuned by Pray Performance Stock Longblock 800 SAE rwhp. 9.4 @ 145 mph.

06-23-2018, 01:27 PM	#6
KingLT1 Drives: 2016 1SS NFG A8 Join Date: Aug 2017 Location: 46804 Posts: 7,664	5th gear pull is 25whp less, so you would be 455-460whp in 6th, then add E85 and you would be 480-485whp. Sounds spot on imo. __________________ 2016 NFG SS A8/Whipple 2.9/Fuel System/Flex Fuel

06-23-2018, 11:49 AM	#2
ULTRAZLS1 Drives: 14 Silverado LTZ Z71, 16 Camaro SS Join Date: Nov 2009 Location: Jackson, Michigan Posts: 4,428	that's about right if they used 5th gear instead of 6th and you are on 93 not e85

06-23-2018, 12:29 PM	#4
Camarols6 Drives: 2017 camaro 2ss Join Date: Dec 2017 Location: Newnan, Ga Posts: 14	So this is normal for a 5th gear pull?

06-23-2018, 01:47 PM	#7
Camarols6 Drives: 2017 camaro 2ss Join Date: Dec 2017 Location: Newnan, Ga Posts: 14	Tuner said it was a 6th gear pull but in the vid I took I only counted him going into 5th. So if it’s a 6th gear pull it sounds a little off.

User Name		Remember Me?
Password