FI and 1/2 mile runs - Page 3

jessrayo · 05-13-2017, 06:42 PM

Quote:

Originally Posted by BH1

So my M6 can get to 190, in 5th, with enough power. With near 600 wheel, maybe 180?

You are going have to work the manual really clean but I think 180 is possible. I've been to the Tx mile 3 times with my ADM badged ZL1. I think I have 5 passes over 200 mph with a best of 203.5. I may be back in October if I ever get the engine back from LME. I cracked a head the last time I was there.

Chevy71 · 05-13-2017, 09:10 PM

Quote:

Originally Posted by Perdieu

Wasola, MO ??? If so around 4hrs, I'm just outside of Kansas City

Yeah Wasola, MO.. I have a vendor there that could handle shipping for me. I'll have to talk to him Monday. I would like to take your short block to do a bore and stroke forged set up. When do you think you will be ready to part with it?

BH1 · 05-14-2017, 09:31 AM

Quote:

Originally Posted by jessrayo

You are going have to work the manual really clean but I think 180 is possible. I've been to the Tx mile 3 times with my ADM badged ZL1. I think I have 5 passes over 200 mph with a best of 203.5. I may be back in October if I ever get the engine back from LME. I cracked a head the last time I was there.

Hope so, that's my goal for this car; 180+ in the mile. Pretty sure I can work the manual efficiently (been driving exclusively manual performance cars for 25+ yrs). I guess it'll be up to the conditions and how close to 600 wheel I can get.

Impressive runs on your part.

ProCharger · 05-15-2017, 03:32 PM

Quote:

Originally Posted by SGDM

The ring gap was measured on one of the pistons that blew and measured .013

I have seen them personally tighter than .010

Yet others larger than .018

So luck of the draw it seems.

Joe's_cool_1le · 05-15-2017, 07:41 PM

Forgot to mention I'm going to PDR this run! Should definitely be entertaining or some might say explosive. lol

BH1 · 05-15-2017, 08:04 PM

Quote:

Originally Posted by Joe's_cool_1le

Forgot to mention I'm going to PDR this run! Should definitely be entertaining or some might say explosive. lol

Looking forward to seeing it. I GoPro'd mine, the PDR would've been great to have.

Hard Parker · 05-15-2017, 08:38 PM

I'll be runnin see ya then!!

Joe's_cool_1le · 05-15-2017, 08:50 PM

Quote:

Originally Posted by Hard Parker

I'll be runnin see ya then!!

Good deal. Registration opens up on May 26th at 8am and I hear they sell out quick. Going on a cruise next week and this is only reason why I'm purchasing the data package. Don't want to miss it. Just purchased my Kooks Long tubes and 3 inch exhaust from dynosteve tonight so I'm hoping to have that and my smaller pulley installed way before the event. It should be a blast for sure.

Hard Parker · 05-15-2017, 11:15 PM

At NC I am racing

05-15-2017, 07:41 PM	#33
Joe's_cool_1le Drives: Black 2017 Camaro SS 1LE Join Date: Dec 2016 Location: Virginia Beach Posts: 1,319	Forgot to mention I'm going to PDR this run! Should definitely be entertaining or some might say explosive. lol __________________ 2017 1LE SS Black - Mods - Forged - lowered compression - BTR custom Cam - Whipple, 3.500 upper and 8.0 lower pulley, Roto-Fab, 1 7/8 Kooks headers, off road pipes, & 3" Kooks full exhaust. LT4 fuel system, with Alky single nozzle running 100% meth. (not installed yet) DSX Tuning flex fuel and DSX tuning Aux pump

05-15-2017, 08:38 PM	#35
Hard Parker Drives: ZL1 Join Date: Sep 2011 Location: Phoenix Posts: 1,524	I'll be runnin see ya then!! __________________ 2017 Camaro 1LE Nightfall Gray Metallic RIP ☠️☠️☠️ 2017 Camaro ZL1 Black Exposed CF\|Sunroof\|6 Speed Click HERE to follow my build!! Click HERE to follow me on Instagram #savethemanuals

05-15-2017, 11:15 PM	#37
Hard Parker Drives: ZL1 Join Date: Sep 2011 Location: Phoenix Posts: 1,524	At NC I am racing __________________ 2017 Camaro 1LE Nightfall Gray Metallic RIP ☠️☠️☠️ 2017 Camaro ZL1 Black Exposed CF\|Sunroof\|6 Speed Click HERE to follow my build!! Click HERE to follow me on Instagram #savethemanuals

User Name		Remember Me?
Password