2016 Camaro 1.5 Lowering Springs - Page 20

Ricardo@Phastek · 01-05-2017, 09:07 AM

Quote:

Originally Posted by diirk

Any updates on the new springs?

Hopefully about 2 week should have some sets. I know we have 50 sets on order.

Quote:

Originally Posted by BowtieRocket

Sounds like a week or two for availability. Check out their weekly q&a show on facebook. They talked about availability there today at 12pm central time

Thanks for tuning in!!

Quote:

Originally Posted by Cali85SS

So this drop looks really good. Anyone have a pic with the Side Skirts and Splitter?

Ill get some updated pics of our car for ya.

Cali85SS · 01-05-2017, 10:07 AM

That would be great, Looks low already..side skirts may be too low, if there is such a thing .

BowtieRocket · 01-05-2017, 10:27 AM

Ya, I am definitely on the fence about lowering. Don't want to have a problem with driveway and every speed bump or uneven road condition...

diirk · 01-05-2017, 10:44 AM

I'm lowered on the Phastek springs and really haven't had any issues.
Speed bumps haven't been a problem. Driveways are usually a non-issue too. I do angle them though.

BowtieRocket · 01-05-2017, 11:02 AM

Quote:

Originally Posted by diirk

I'm lowered on the Phastek springs and really haven't had any issues.
Speed bumps haven't been a problem. Driveways are usually a non-issue too. I do angle them though.

That is comforting. I have been planning on the BMR 1" kit. I do angle my drive way anyway as it is quite sharp and bumpy.

sub_ETCS_ret · 01-05-2017, 11:02 AM

Quote:

Originally Posted by diirk

I'm lowered on the Phastek springs and really haven't had any issues.
Speed bumps haven't been a problem. Driveways are usually a non-issue too. I do angle them though.

I would love to lower mine. The lowered stance looks so much better but there is no way I can get into my garage if I lower.

Cali85SS · 01-05-2017, 12:33 PM

Hopefully someone can post some pics of this drop with the ground kit...it looks like it might be a little too tight for comfort.

Ricardo@Phastek · 01-10-2017, 09:09 AM

Quote:

Originally Posted by Cali85SS

Hopefully someone can post some pics of this drop with the ground kit...it looks like it might be a little too tight for comfort.

Here are some shots I got the other day in a parking garage. Sorry for the cell phone quality but I will go back later to get some good shots.

We have the ACS kit all around.

diirk · 01-10-2017, 10:10 AM

Are those the new springs?
Have you measured if there's a difference in the amount of drop?

My car seems to be a bit lower with the v1 springs.

Ricardo@Phastek · 01-10-2017, 10:16 AM

Quote:

Originally Posted by diirk

Are those the new springs?
Have you measured if there's a difference in the amount of drop?

My car seems to be a bit lower with the v1 springs.

Yes, we measured and they are exactly the same as before with the first version. Our tire combo might be different, which would cause it to look different.

Our tire size is below...
Front - 275/35
Rear - 305/35

diirk · 01-10-2017, 10:20 AM

Cool.
It could also be the angle of the pic. Mine doesn't match yours but it's all I had available.

I'm running 285/30-20 & 305/30-20

sub_ETCS_ret · 01-10-2017, 08:53 PM

Quote:

Originally Posted by Ricardo@Phastek

Here are some shots I got the other day in a parking garage. Sorry for the cell phone quality but I will go back later to get some good shots.

We have the ACS kit all around.

What offset are you running on the rear wheels?

Sent from my SM-G920V using Tapatalk

Ricardo@Phastek · 01-11-2017, 02:07 PM

Quote:

Originally Posted by sub_ETCS_ret

What offset are you running on the rear wheels?

Sent from my SM-G920V using Tapatalk

20x11 +43mm is what we have on our car.

Adampau123 · 01-11-2017, 02:30 PM

Will these Springs work with the 2.0 turbo?

01-05-2017, 10:27 AM	#269
BowtieRocket Drives: 2016 Camaro 2SS- M6 Join Date: Sep 2016 Location: Albuquerque Posts: 1,133 View My Garage	Ya, I am definitely on the fence about lowering. Don't want to have a problem with driveway and every speed bump or uneven road condition... __________________ 2016 Camaro 2SS M6- Garage

01-05-2017, 10:44 AM	#270
diirk Drives: 2016 Camaro SS Join Date: Apr 2016 Location: Utah Posts: 713	I'm lowered on the Phastek springs and really haven't had any issues. Speed bumps haven't been a problem. Driveways are usually a non-issue too. I do angle them though. __________________ 16 2SS 6MT NPP White \| MRR \| ACT \| JBA \| SCT \| C7C 04 Ram 2500 CDT 4x4 Quad 91 Miata 1.8 Feal Wilwood Track Car 1morproject

01-10-2017, 10:10 AM	#275
diirk Drives: 2016 Camaro SS Join Date: Apr 2016 Location: Utah Posts: 713	Are those the new springs? Have you measured if there's a difference in the amount of drop? My car seems to be a bit lower with the v1 springs. Attached Images __________________ 16 2SS 6MT NPP White \| MRR \| ACT \| JBA \| SCT \| C7C 04 Ram 2500 CDT 4x4 Quad 91 Miata 1.8 Feal Wilwood Track Car 1morproject

01-10-2017, 10:20 AM	#277
diirk Drives: 2016 Camaro SS Join Date: Apr 2016 Location: Utah Posts: 713	Cool. It could also be the angle of the pic. Mine doesn't match yours but it's all I had available. I'm running 285/30-20 & 305/30-20 __________________ 16 2SS 6MT NPP White \| MRR \| ACT \| JBA \| SCT \| C7C 04 Ram 2500 CDT 4x4 Quad 91 Miata 1.8 Feal Wilwood Track Car 1morproject

01-05-2017, 10:07 AM	#268
Cali85SS Drives: Black 2016 SS Join Date: Jun 2016 Location: Bay Area Posts: 51 View My Garage	That would be great, Looks low already..side skirts may be too low, if there is such a thing .

01-05-2017, 12:33 PM	#273
Cali85SS Drives: Black 2016 SS Join Date: Jun 2016 Location: Bay Area Posts: 51 View My Garage	Hopefully someone can post some pics of this drop with the ground kit...it looks like it might be a little too tight for comfort.

01-11-2017, 02:30 PM	#280
Adampau123 Drives: 2017 Red Hot 1SS 1LE Join Date: Aug 2016 Location: Orlando Florida Posts: 187	Will these Springs work with the 2.0 turbo?

User Name		Remember Me?
Password