pics of my magnuson installs

oneredry · 12-15-2016, 01:46 PM

Although it may not be a lot, a friend and I were hard at it. the biggest grip I have was that stupid harmonic balancer. no real way around it. had to take the starter off and hold the fly wheel with a pry bar. so this was as of last weekend. and has been sitting since. So busy with kids ect... I would like to get it done so my wife can get her Enclave back in the garage.

AbsolutHank · 12-15-2016, 01:55 PM

Thanks for the pics. I'm trying to install mine this weekend as well! Did you try removing the crank bolt with an impact or was it by hand/breaker bar?

oneredry · 12-15-2016, 01:58 PM

Quote:

Originally Posted by AbsolutHank

Thanks for the pics. I'm trying to install mine this weekend as well! Did you try removing the crank bolt with an impact or was it by hand/breaker bar?

Did not use an impact. We had air to work with, but with the force this bad boy had on it, wouldn't have done much good. Your going to need a good cheater bar or very long breaker. And make sure you heat the crap out of that bolt. When your torqueing it. I'm 170lbs and I was standing on it. The GM specs and the angle of that thing is monstrous.

12-15-2016, 01:46 PM	#1
oneredry HYPER SS Drives: 2016 Supercharged 2SS Join Date: Feb 2014 Location: Troy OH Posts: 1,252	pics of my magnuson installs Although it may not be a lot, a friend and I were hard at it. the biggest grip I have was that stupid harmonic balancer. no real way around it. had to take the starter off and hold the fly wheel with a pry bar. so this was as of last weekend. and has been sitting since. So busy with kids ect... I would like to get it done so my wife can get her Enclave back in the garage. __________________ Ordered: 1/15/2016 2000 status 02/01/16 3000 status 02/29/16 3400 status 03/07/16 TPW of 03/14/16 4200 status 03/17/16 in transit! Delivered 03/23/16 2SS Hyper Blue \| 6M \| NPP \| Mag ride \| ceramic white Int. \| Black out bow ties \| P3 Gauge\| Front splitter. \| 6 pot upgraded brembo brakes. \| Magnuson Supercharger/95MM pulley \| Rotofab Intake \| ZL1 side skirts \| HRE FF04 wheels - Michelin PSS4 \| ZL1 add ons rock guards and lift points. \| AWE touring - resinated catback with link pipes.

12-15-2016, 01:55 PM	#2
AbsolutHank Drives: 2016 Corvette Z06 M6 Join Date: May 2009 Location: Odenton, MD Posts: 874	Thanks for the pics. I'm trying to install mine this weekend as well! Did you try removing the crank bolt with an impact or was it by hand/breaker bar? __________________ 2013 Dodge Viper #44/150 Launch Edition IG:@absoluthank *20/21 BC Forged Wheels : BC Coilovers: TA Aero*

User Name		Remember Me?
Password