[steelheadrob]

Originally Posted by laynlo15

I bought the Non Intercooled kit after talking to Mike (toohighpsi). Obviously I can upgrade at a later date. I plan on running one of the kits to cool the charge into the intake which he thinks will be fine for my application. I don't drive it daily (couple times a week) and drag race it 2 couple times a month. I can run the 5.5 pulley without any alky back up, but if I want to run 6.5 lbs of boost or more I'll have to either intercool it or inject it with a cool charge like Meth injection. I'm limited to what I want to spend since I'm retiring in a couple years and don't want to go overboard as I have dozens of time in the past. I like the AEM system that Mike is running on the Magnacharger car and with the ROTOFAB intake it made 70 hp which is crazy, I'd be happy with 50 additional hp. So, that's my plan and just waiting on the SC to be shipped which should be by Friday and maybe start the install on the following weekend if it works out. My Rotofab will be here Friday so need to make the decision on the Alky/Meth system.

Considering the same set up. Look forward to hearing how it turns out.

[laynlo15]

Me too, was shipped today and should arrive next Thursday. Might start on it Sunday.

[laynlo15]

Rob I'll let everyone know how it works out. I'm stoked and two other guys in my area ordered also. We will probably install them in my shop.

[steelheadrob]

Great! I will stay tuned. Good luck.

[laynlo15]

My Maggie arrived today and its going on next Wednesday. I'll give an update Wednesday night if I can get it home. Its gonna get shitty here in Missouri over the next week. So I'll keep my fingers crossed.

[AbsolutHank]

Good luck! Mine arrived today too

[laynlo15]

I guy I know here in town had his show up yesterday also, his is a M6. One of my other buddies had his installed Monday on his Denali, he loves it and that dam truck made 359 rwhp and 400 lbs of torque stock. His is only going to make about 110 rwhp, but still 470 rwhp on an his truck should be a shit load of fun.

[laynlo15]

Hank, are you doing the non or intercooled?

[AbsolutHank]

Originally Posted by laynlo15

Hank, are you doing the non or intercooled?

I decided on the intercooled kit. I have my stock tune pulled and ready to email but waiting on Mike (toohighpsi) to let me know if they can get the Rotofab tune to me!

[JANNETTYRACING]

Originally Posted by laynlo15

I bought the Non Intercooled kit after talking to Mike (toohighpsi). Obviously I can upgrade at a later date. I plan on running one of the kits to cool the charge into the intake which he thinks will be fine for my application. I don't drive it daily (couple times a week) and drag race it 2 couple times a month. I can run the 5.5 pulley without any alky back up, but if I want to run 6.5 lbs of boost or more I'll have to either intercool it or inject it with a cool charge like Meth injection. I'm limited to what I want to spend since I'm retiring in a couple years and don't want to go overboard as I have dozens of time in the past. I like the AEM system that Mike is running on the Magnacharger car and with the ROTOFAB intake it made 70 hp which is crazy, I'd be happy with 50 additional hp. So, that's my plan and just waiting on the SC to be shipped which should be by Friday and maybe start the install on the following weekend if it works out. My Rotofab will be here Friday so need to make the decision on the Alky/Meth system.

In my opinion if you are going to run Alky injection you are better off non intercooled, Better atomization and great cooling effect.

I can easily see you run 10 psi with Alky control system set up and tuned properly.

Let me know If I can be of assistance, we are an Alky controls Dealer.

Ted.

[sub_ETCS_ret]

Originally Posted by AbsolutHank

I decided on the intercooled kit. I have my stock tune pulled and ready to email but waiting on Mike (toohighpsi) to let me know if they can get the Rotofab tune to me!

Did Mike say if they would still support a warranty with the Maggie and Rotofab tune? Just curious.

[JANNETTYRACING]

Originally Posted by AbsolutHank

I decided on the intercooled kit. I have my stock tune pulled and ready to email but waiting on Mike (toohighpsi) to let me know if they can get the Rotofab tune to me!

I expect you will have to seek my help with that but you never know.

Ted.

[laynlo15]

Got my stock tune sent off to Magnuson today. I know I won't anything back till Monday. I just have to get it back by Tuesday so we can load it Wednesday after the install. I did forget to let them know I was using the Rotofab. But, Mike altready knows that so I'll remind him.

[AbsolutHank]

Got everything installed today and up and running! I did in fact get the Rotofab tune from Magnuson, and have temporarily installed the stock air box until the Rotofab arrives this week. Man, what a super nice kit!