[ADM PERFORMANCE]

Originally Posted by Padre

How are the IAT's? Intercooling?

Padre

Since we are all OEM parts I would have to say very good. Also has 2 Heat exchanger in the front as well as a ton of frontal area

[ADM PERFORMANCE]

Originally Posted by AbsolutHank

Man I wish this was made available as a DIY package. I'm ordering a Magnuson tomorrow but would prefer this setup instead!

We are the north Texas distributor,feel free to order from us.

[ADM PERFORMANCE]

Originally Posted by JoeAyalaM

Andy,

Why is there 10 Hp less than that shown in your intake comparisson, was that a Manual car or is it just an expected output difference between cars?

What would you expect using 91 octane fuel?

Thanks.

We have learned a lot since then.Plus the manual car had 10 miles on it and this one has 11k

[ADM PERFORMANCE]

Originally Posted by Thompyt

Confused. It is a DIY kit

http://lsa-conversion-store.myshopif...ger-kit-625-hp

Maybe the exception of the tune.

We are just trying to make people aware of what we are up to and will be offering.

I already sold 2 out the door to shops,but they are capable of making the parts we send work with a slight amount of massaging.

[sub_ETCS_ret]

Originally Posted by ADM PERFORMANCE

We are just trying to make people aware of what we are up to and will be offering.

I already sold 2 out the door to shops,but they are capable of making the parts we send work with a slight amount of massaging.

Do you send a tune with the kit? Or is that up to the installer?

Sent from my SM-G920V using Tapatalk

[E-Ray]

Just curious, with the smaller pulley, how much boost it is pushing? And how much higher the IAT's are running. Very nice setup, good job ADM Performance.

[ADM PERFORMANCE]

Originally Posted by sub_ETCS_ret

Do you send a tune with the kit? Or is that up to the installer?

Sent from my SM-G920V using Tapatalk

We can send a tune that can be edited to 2016 auto and manual cars with roto fab intakes for $200 extra

[ADM PERFORMANCE]

Originally Posted by E-Ray

Just curious, with the smaller pulley, how much boost it is pushing? And how much higher the IAT's are running. Very nice setup, good job ADM Performance.

The factory supercharger pulley is 2.4 and we increase the size to 2.6 now.

It makes a peak boost at the very end of the pull due to cam timing we run of 11.3.

Cam phaser adjustments have a large influence on boost and dyno curve.

[Sack Rat 2SS]

This is so cool, especially in that it uses factory parts for almost all of the install package. And to those that asked about a KIT I think one is available from ADM if you are somewhat handy and willing to DIY. If this were a manual car with same mods I can see over 600 rwhp. And lastly I understand that ADM can install on 2017 Camaro SS cars as well but will let him address this himself.

[ADM PERFORMANCE]

Originally Posted by Sack Rat 2SS

This is so cool, especially in that it uses factory parts for almost all of the install package. And to those that asked about a KIT I think one is available from ADM if you are somewhat handy and willing to DIY. If this were a manual car with same mods I can see over 600 rwhp. And lastly I understand that ADM can install on 2017 Camaro SS cars as well but will let him address this himself.

Yes we have 17 supprt now as well as support for the newzl1

[Perdieu]

Originally Posted by ADM PERFORMANCE

Yes we have 17 supprt now as well as support for the newzl1

Are you not touching anything in the trans when you tune ?

What kind of turning around time, from drop off to pick up ?

[Rosie2514]

Originally Posted by Perdieu

Are you not touching anything in the trans when you tune ?

What kind of turning around time, from drop off to pick up ?

interested in this as well ^

[BoostedX2]

Andy--any drivetrain issues at this power level?

[ADM PERFORMANCE]

Originally Posted by Perdieu

Are you not touching anything in the trans when you tune ?

What kind of turning around time, from drop off to pick up ?

10-12 Days currently. The factory calibration has proven very reliable so we leave them alone.