Homepage Garage Wiki Register Social Groups Calendar Search Today's Posts Mark Forums Read
#Camaro6
Go Back   CAMARO6 > Technical Camaro Topics > Cosmetic modifications (exterior and interior)


Phastek Performance


Post Reply
 
Thread Tools
Old 12-20-2015, 07:25 PM   #1
Imtheboss
 
Drives: White 1lt sunroof NPP
Join Date: Dec 2015
Location: Los Angeles
Posts: 10
Emblem Delete

Does anybody know how to remove the front Chevy Emblem from a 2016 lt?
Imtheboss is offline   Reply With Quote
Old 12-20-2015, 07:28 PM   #2
bybcous


 
bybcous's Avatar
 
Drives: 2016 Hyper Blue 1SS
Join Date: Jul 2015
Location: hampton roads
Posts: 2,763
What emblem? The rear just buy the 3m emblem removal spray from autozone and emblem will fall off after a few minutes. The front is attached.
__________________
1ss/Auto-Hyper Blue
acs carbon flash spoiler, bmr springs, gm clear tails.
Texas speed cam, 223/227 .635/.635 116 LSA, Kooks Long Tube Headers with green cats, MSD Atomic Air Force Intake, CAI Cold Air Intake, QTP cutouts. 503 hp
Best so far 11.5 at 123 with a 1.83 60ft. BMR lower and upper trailing arms and upper control arms,E85
DELIVERED 12/29/15
http://youtube.com/bybcous " no talking only racing on my youtube"
bybcous is offline   Reply With Quote
Old 12-20-2015, 09:27 PM   #3
Imtheboss
 
Drives: White 1lt sunroof NPP
Join Date: Dec 2015
Location: Los Angeles
Posts: 10
The one thats on the grille, can I simply take it off or would I have to replace the grille?
Imtheboss is offline   Reply With Quote
Old 12-20-2015, 09:52 PM   #4
Tr6
The Dogfather
 
Drives: #1 off the line for a customer. '16
Join Date: Oct 2015
Location: Andover, KS
Posts: 2,621
If you never plan on putting the front one off you can just break the latch on the bowtie and it'll come off. Keep in mind, not only does it "click" into place but it is also has an adhesive patch on it. So... You can either grab the 3m emblem removal spray from autozone or use a heat gun/hair dryer to loosen up the glue then use dental floss or fishing line to remove the glue then break the tab behind the bowtie.

DO NOT PRY WITH A SCREW DRIVER like my dealership did.
__________________
2SS, Garnet Red with Adrenalin red, NPP, MRC M6 coupe
#33 off the line #1 order for Customer.
Build thread HERE!
Story of my delivery HERE!
Tr6 is offline   Reply With Quote
Old 12-20-2015, 10:00 PM   #5
Tim Adams
 
Tim Adams's Avatar
 
Drives: 2020 Elkhart Lake Blue 1LT Z51 C8
Join Date: May 2009
Location: Minooka, IL
Posts: 621
Screwdriver?? How can someone be that stupid.
__________________
Ordered-Hyper Blue 1SS, A8, NPP, 56W wheels Built 1/20/16
Delivered 2/12/16!!
Sold 9/17/19 :(

2020 C8 ordered!!


"The greatest sound in the world is a Rolls Royce Merlin over 100 inches"

www.timadamsphotography.com
Tim Adams is offline   Reply With Quote
Old 12-24-2015, 06:43 PM   #6
Glen e
Retired from Car mfrs....
 
Glen e's Avatar
 
Drives: 2LT RS/HR-V
Join Date: May 2013
Location: /Fort Lauderdale
Posts: 10,044
I did this today, a small trim tool used to pry on one end popped it loose with no effort. Replaced with black badge. No adhesive on either badge. Snaps in place.
Glen e is offline   Reply With Quote
Old 12-26-2015, 04:52 PM   #7
bbrown450
 
bbrown450's Avatar
 
Drives: 2016 Mosaic Black 2SS
Join Date: Dec 2013
Location: Plant City
Posts: 408
Smoked mine with Plasi Dip "smoke" dark out but will put pics on tomorrow, Did Black on bowtie......works just fine....
bbrown450 is offline   Reply With Quote
 
Post Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 10:34 AM.


Powered by vBulletin® Version 3.8.9 Beta 4
Copyright ©2000 - 2026, vBulletin Solutions, Inc.