JDP Motorsports | 2016 Camaro 1SS M6 | Development Vehicle!

JDP Motorsports · 12-22-2015, 06:36 PM

Our 2016 Camaro 1SS M6 arrived late last night at Young Chevrolet! We ordered our car on August 16th and the long wait is OVER!!!!

I went up today to PDI it and pick it up at Young Chevrolet. The snow was flying so I took the truck and trailer. I haven't even driven the car yet on the road..

The car has 6 miles on it and it will be going on the dyno tomorrow for a baseline. We will also be testing a 2016 C7 M7 car back to back to see what the actual power delta is on the same day using the same dyno.

Stay tuned!!!!!

Kind regards,

Jordan Priestley
888.308.6007

KaBoom1701 · 12-22-2015, 06:55 PM

Sweet.

Congrats.

Options?

13vertss · 12-22-2015, 06:56 PM

Can't wait to see the two Dyno runs. Should be interesting conversation.

JDP Motorsports · 12-22-2015, 07:02 PM

Quote:

Originally Posted by KaBoom1701

Sweet.

Congrats.

Options?

I appreciate it!!! It is a 1SS M6 with NPP! I like them down and dirty! We'll be developing packages and testing products like we did with our 5th Gen "Frankey".

Quote:

Originally Posted by 13vertss/r's

Can't wait to see the two Dyno runs. Should be interesting conversation.

I haven't seen a back to back of a brand new C7 vs a brand new 6th Gen so we'll make it so! I am curious myself.

Kind regards,

Jordan Priestley
888.308.6007

paul84043 · 12-22-2015, 07:21 PM

I wouldn't be able to run my brand new baby that hard.. Just couldn't do it..

The new Camaro looks SIIICCKK. can't wait to stop by and see it in person.

mt3130 · 12-22-2015, 08:06 PM

Can't wait to see what you guys come up with!

I'm also curious to see how the C7 and 6th gen compare when run on the same day, same dyno.

2000form · 12-22-2015, 08:11 PM

Congrats! Appreciate you sharing your results.

I'm curious how they compare as well.

JDP Motorsports · 12-23-2015, 08:06 AM

Quote:

Originally Posted by paul84043

I wouldn't be able to run my brand new baby that hard.. Just couldn't do it..

The new Camaro looks SIIICCKK. can't wait to stop by and see it in person.

I'll put some break-in mile on the dyno before I go WOT.

I appreciate it! It is a beautiful car and we can't wait to start the modding!

Quote:

Originally Posted by mt3130

Can't wait to see what you guys come up with!

I'm also curious to see how the C7 and 6th gen compare when run on the same day, same dyno.

Quote:

Originally Posted by 2000form

Congrats! Appreciate you sharing your results.

I'm curious how they compare as well.

I'm curious myself so we'll find out! Stay tuned for the results.

Kind regards,

Jordan Priestley
888.308.6007

KMPrenger · 12-23-2015, 08:09 AM

Just curious...I think the car will likely dyno showing good numbers like all the rest, but wouldn't a broke in car show slightly better numbers? Just a thought running through my head is all.

JDP Sales · 12-23-2015, 08:32 AM

Quote:

Originally Posted by KMPrenger

Just curious...I think the car will likely dyno showing good numbers like all the rest, but wouldn't a broke in car show slightly better numbers? Just a thought running through my head is all.

Valid point. We will be running some miles on the cars before we go Ham Sandwich on them. What is "broke in" though? You could as 10 people on camaro5 and get 9 different answers. Our goal is to compare two cars with almost identical miles, almost identical "break ins", on the same dyno and on the same day.

We plan to put the Camaro vs. Corvette power argument to rest, today.

I'm pulling for the 6th Gen!

All the best,

Jared Royce
888.308.6007

KMPrenger · 12-23-2015, 04:03 PM

Quote:

Originally Posted by JDP Sales

Valid point. We will be running some miles on the cars before we go Ham Sandwich on them. What is "broke in" though? You could as 10 people on camaro5 and get 9 different answers. Our goal is to compare two cars with almost identical miles, almost identical "break ins", on the same dyno and on the same day.

We plan to put the Camaro vs. Corvette power argument to rest, today.

I'm pulling for the 6th Gen!

All the best,

Jared Royce
888.308.6007

Nice!

Looking forward to results!

laynlo15 · 12-23-2015, 09:04 PM

looks just like the one I ordered, A8 instead of the m6. Love it

ULTRAZLS1 · 12-23-2015, 09:11 PM

Quote:

Originally Posted by JDP Sales

Valid point. We will be running some miles on the cars before we go Ham Sandwich on them. What is "broke in" though? You could as 10 people on camaro5 and get 9 different answers. Our goal is to compare two cars with almost identical miles, almost identical "break ins", on the same dyno and on the same day.

We plan to put the Camaro vs. Corvette power argument to rest, today.

I'm pulling for the 6th Gen!

All the best,

Jared Royce
888.308.6007

I like the way you think lol...sounds good cant wait.

Make sure you do like 3 or 4 pulls with each and get an average. That way it is clear what they are putting down.

SS 1LE · 12-23-2015, 10:36 PM

Congrats. Post up some interior pics...

12-22-2015, 06:36 PM	#1
JDP Motorsports Drives: 2011 Camaro SS/ 2016 Camaro SS Join Date: Jun 2009 Location: Sandy, Utah Posts: 3,256	JDP Motorsports \| 2016 Camaro 1SS M6 \| Development Vehicle! Our 2016 Camaro 1SS M6 arrived late last night at Young Chevrolet! We ordered our car on August 16th and the long wait is OVER!!!! I went up today to PDI it and pick it up at Young Chevrolet. The snow was flying so I took the truck and trailer. I haven't even driven the car yet on the road.. The car has 6 miles on it and it will be going on the dyno tomorrow for a baseline. We will also be testing a 2016 C7 M7 car back to back to see what the actual power delta is on the same day using the same dyno. Stay tuned!!!!! Kind regards, Jordan Priestley 888.308.6007

12-22-2015, 06:55 PM	#2
KaBoom1701 KaBoom1701 Drives: 13' ZL1 Red M6 Join Date: Dec 2012 Location: I.E. SoCal (Yucaipa) Posts: 8,631	Sweet. Congrats. Options? __________________ Mods: Roto-Fab Intake, WW Res. kit & Big Gulp Air Scoop, Elite Catch Can, ATI Super Damper & 18% OD Pulley, LF Idler pulley bracket, Metco CC breather, ID850 Injectors, Stainless Power Headers w/ ceramic coating, TR71X Spark Plugs, JMS Fuel Pump Booster, Bo White TB, Tuned by Ted @ Jannetty Racing, Ron Davis HX, D3 Reservoir, Pfadt 1" Springs, Moreno Camber Plates, ZL1 Addons Splitter guard washers, Tow Hook kit & rock guards, Hurst Shifter Billet Plus 6 Speed Short Shifter, ZL1 DRL lighting harness, ZL1 Recaro Seats.

12-23-2015, 08:09 AM	#9
KMPrenger Drives: 16 Camaro SS, 15 Colorado Join Date: May 2009 Location: Jefferson City, Missouri Posts: 13,969	Just curious...I think the car will likely dyno showing good numbers like all the rest, but wouldn't a broke in car show slightly better numbers? Just a thought running through my head is all. __________________ 2016 Camaro 1SS - 8-speed - NPP - Black bowties 2010 Camaro 1LT V6 (Sold. I will miss her!)

12-22-2015, 06:56 PM	#3
13vertss Drives: 2013 Camaro convertible 2SS/RS Join Date: Sep 2014 Location: Southern NH Posts: 1,077	Can't wait to see the two Dyno runs. Should be interesting conversation.

12-22-2015, 07:21 PM	#5
paul84043 Drives: 2015 Camaro 2SS RS 1LE Join Date: Nov 2011 Location: Lehi, Utah Posts: 1,349 View My Garage	I wouldn't be able to run my brand new baby that hard.. Just couldn't do it.. The new Camaro looks SIIICCKK. can't wait to stop by and see it in person.

12-22-2015, 08:06 PM	#6
mt3130 Drives: Coupeless :( Join Date: Jan 2015 Location: SWFL Posts: 980	Can't wait to see what you guys come up with! I'm also curious to see how the C7 and 6th gen compare when run on the same day, same dyno.

12-22-2015, 08:11 PM	#7
2000form Drives: 2000 pontiac formula Join Date: Dec 2015 Location: palm beach gardens Posts: 105	Congrats! Appreciate you sharing your results. I'm curious how they compare as well.

12-23-2015, 09:04 PM	#12
laynlo15 Drives: 2022 Lt1 A10 Join Date: Nov 2015 Location: clark, mo Posts: 8,882	looks just like the one I ordered, A8 instead of the m6. Love it

12-23-2015, 10:36 PM	#14
SS 1LE マスタング = 遅い Drives: 2017 Chevrolet Camaro SS 1LE Join Date: Aug 2015 Location: Florida Posts: 7,061	Congrats. Post up some interior pics...

User Name		Remember Me?
Password