You are browsing camaro6 
03-17-2024, 07:05 AM
|
#1 |
 
Drives: 2018 SS Join Date: Mar 2019
Location: Hudson NH
Posts: 93
|
LT4 Injectors
Used for about 2k LT4 fuel injectors. 300.00 shipped.
__________________
2018 SS, Maggie 2650, Full forged bottom end, JRE Terminator cam, Golen motors CNCed stock heads, LT4 fuel system, Gulfcoat alum driveshaft, CSP/Stainless Works 2 inch headers, Stainless Works cat back, Kooks screamers, Circle D 3800 stall converter, DSX flex sensor, tuned by Ted Jannetty, 9.27@ 147.07 MPH
Last edited by 18SS; 04-16-2024 at 05:24 PM. |
|
|
|
03-17-2024, 11:51 PM
|
#2 |
|
Drives: 22 SS 1LE 6MT Join Date: Sep 2022
Location: Miami FL
Posts: 54
|
So 4 used and 4 new
|
|
|
|
|
03-18-2024, 12:23 PM
|
#3 |
|
Drives: 2018 SS Join Date: Mar 2019
Location: Hudson NH
Posts: 93
|
No sir all eight are used for a couple thousand miles.
__________________
2018 SS, Maggie 2650, Full forged bottom end, JRE Terminator cam, Golen motors CNCed stock heads, LT4 fuel system, Gulfcoat alum driveshaft, CSP/Stainless Works 2 inch headers, Stainless Works cat back, Kooks screamers, Circle D 3800 stall converter, DSX flex sensor, tuned by Ted Jannetty, 9.27@ 147.07 MPH
|
|
|
|
|
03-29-2024, 02:48 PM
|
#4 |
|
Drives: 2018 SS Join Date: Mar 2019
Location: Hudson NH
Posts: 93
|
Lower price
350.00 shipped.
__________________
2018 SS, Maggie 2650, Full forged bottom end, JRE Terminator cam, Golen motors CNCed stock heads, LT4 fuel system, Gulfcoat alum driveshaft, CSP/Stainless Works 2 inch headers, Stainless Works cat back, Kooks screamers, Circle D 3800 stall converter, DSX flex sensor, tuned by Ted Jannetty, 9.27@ 147.07 MPH
|
|
|
|
|
04-16-2024, 05:24 PM
|
#5 |
|
Drives: 2018 SS Join Date: Mar 2019
Location: Hudson NH
Posts: 93
|
Lower price.
300.00 shipped.
__________________
2018 SS, Maggie 2650, Full forged bottom end, JRE Terminator cam, Golen motors CNCed stock heads, LT4 fuel system, Gulfcoat alum driveshaft, CSP/Stainless Works 2 inch headers, Stainless Works cat back, Kooks screamers, Circle D 3800 stall converter, DSX flex sensor, tuned by Ted Jannetty, 9.27@ 147.07 MPH
|
|
|
|
|
07-12-2024, 08:28 PM
|
#6 |
|
Drives: 2018 SS Join Date: Mar 2019
Location: Hudson NH
Posts: 93
|
Back up for sales. 300.00 shipped.
__________________
2018 SS, Maggie 2650, Full forged bottom end, JRE Terminator cam, Golen motors CNCed stock heads, LT4 fuel system, Gulfcoat alum driveshaft, CSP/Stainless Works 2 inch headers, Stainless Works cat back, Kooks screamers, Circle D 3800 stall converter, DSX flex sensor, tuned by Ted Jannetty, 9.27@ 147.07 MPH
Last edited by 18SS; 08-04-2024 at 04:59 AM. |
|
|
|
|
08-04-2024, 04:59 AM
|
#7 |
|
Drives: 2018 SS Join Date: Mar 2019
Location: Hudson NH
Posts: 93
|
275.00 shipped
__________________
2018 SS, Maggie 2650, Full forged bottom end, JRE Terminator cam, Golen motors CNCed stock heads, LT4 fuel system, Gulfcoat alum driveshaft, CSP/Stainless Works 2 inch headers, Stainless Works cat back, Kooks screamers, Circle D 3800 stall converter, DSX flex sensor, tuned by Ted Jannetty, 9.27@ 147.07 MPH
|
|
|
|
|
08-13-2024, 01:00 AM
|
#8 |
|
Corvette Guy
Drives: 2015 C7 Join Date: Sep 2023
Location: NJ
Posts: 7
|
PM'ing
|
|
|
|
|
08-14-2024, 03:57 PM
|
#9 |
|
Drives: 2018 SS Join Date: Mar 2019
Location: Hudson NH
Posts: 93
|
Sold. Thank you
__________________
2018 SS, Maggie 2650, Full forged bottom end, JRE Terminator cam, Golen motors CNCed stock heads, LT4 fuel system, Gulfcoat alum driveshaft, CSP/Stainless Works 2 inch headers, Stainless Works cat back, Kooks screamers, Circle D 3800 stall converter, DSX flex sensor, tuned by Ted Jannetty, 9.27@ 147.07 MPH
|
|
|
|
|
|
|
|
|
Post Reply
|
| Thread Tools | |
|
|
