|
|
#29 | |
![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Drives: 2024 CT5-V Blackwing Join Date: Sep 2020
Location: GA
Posts: 3,556
|
Quote:
EDIT: 315/35/20 will not work, 315/30/20 will work. Last edited by Z OH 6; 06-05-2024 at 07:24 PM. |
|
|
|
|
|
|
#30 |
![]() ![]() ![]() ![]() Drives: 2023 ZL1 Join Date: Dec 2022
Location: Columbus, Ohio
Posts: 1,274
|
Z OH 6, would that size fit the non 1LE also does this require a speedo change in HP Tuners...
__________________
Katech Track Day CAM 38%•BTR Dual Valve Springs-Johnson Lifters•Trend 3/8 Chromoly Pushrods• VVT Del•CNC Ported Heads•AFM Delete• C5-R Timing Chain•Katech Oil Pump•Katech 112mm•Maggie 2650 3.25” Upper & ATI SD w/10.32” +20%•10 Rib Belt•RFBG•FI Interchiller Stage 2•THPSI Port w/875cc Inj•Dual Drop In Fuel Pump•DSX Aux Pump•Stainless Works 2" w/Legend NPP Axle Back•GESI UHO 4.5" CATs•Brisk RR14S Plugs•BMR Motor Mounts•BMR Cradle Lockout/Bushings Kit•DSS Chromoly DS•RPM 8-Point Roll Cage•10lb FireSense+ w/4Fire SFI 17.1 Fire Sys•Weld Forged Vitesse Rear 17x10 Beadlocks-Front 18x6•Unlocked TCM
|
|
|
|
|
|
#31 |
![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Drives: 2018 Camaro 2SS A8 Join Date: Jul 2017
Location: East Tennessee
Posts: 13,450
|
Are you sure? I run 305/35/20s in the rear and there is only a (camel) hair's breadth of clearance on the driver side with the already relocated main body harness... a 315 is even taller by a third of an inch...
__________________
2018 Camaro 2SS — G7E MX0 NPP F55 IO6
735 rwhp | 665 rwtq Magnuson TVS 2300 80mm pulley | Kooks 1 7/8" LT headers | JRE smooth idle Terminator cam | LT4 FS & injectors | TSP forged pistons & rods JMS PowerMAX | DSX flex fuel kit | Roto-Fab CAI | Soler 95mm LT5 TB | 1LE wheels | 1LE brakes | BMR rear cradle lockout | JRE custom tune 1100 - 1/30/18 | 2000 - 1/31/18 3000 - 2/06/18 TPW 2/26/18 3400 - 2/19/18 | 3800 - 2/26/18 4300 - 2/27/18 | 4B00 - 3/01/18 4200 - 3/05/18 | 4800 - 3/14/18 5000 - 3/16/18 | 6000 - 3/19/18 |
|
|
|
|
|
#32 |
![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Drives: 2024 CT5-V Blackwing Join Date: Sep 2020
Location: GA
Posts: 3,556
|
|
|
|
|
|
|
#33 |
![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Drives: 2024 CT5-V Blackwing Join Date: Sep 2020
Location: GA
Posts: 3,556
|
You may be right, when I originally replied, I was thinking about a 315/30/20, not a 35, but then I started thinking a few people have run a 315/35/20 but I could be wrong. It is quite a difference in tire height especially if the car is lowered.
Last edited by Z OH 6; 06-06-2024 at 09:21 AM. |
|
|
|
|
|
#34 |
![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Drives: 2018 Camaro 2SS A8 Join Date: Jul 2017
Location: East Tennessee
Posts: 13,450
|
Yup, 315/30/20 is a sweet spot. Too bad many tire options aren't manufactured in that size, including the Nitto 555RII or the Michelin Pilot Super Sport.
__________________
2018 Camaro 2SS — G7E MX0 NPP F55 IO6
735 rwhp | 665 rwtq Magnuson TVS 2300 80mm pulley | Kooks 1 7/8" LT headers | JRE smooth idle Terminator cam | LT4 FS & injectors | TSP forged pistons & rods JMS PowerMAX | DSX flex fuel kit | Roto-Fab CAI | Soler 95mm LT5 TB | 1LE wheels | 1LE brakes | BMR rear cradle lockout | JRE custom tune 1100 - 1/30/18 | 2000 - 1/31/18 3000 - 2/06/18 TPW 2/26/18 3400 - 2/19/18 | 3800 - 2/26/18 4300 - 2/27/18 | 4B00 - 3/01/18 4200 - 3/05/18 | 4800 - 3/14/18 5000 - 3/16/18 | 6000 - 3/19/18 |
|
|
|
|
|
#35 |
![]() Drives: 18 ZL1 - M6 Join Date: Mar 2019
Location: MI
Posts: 456
|
Not trying to Hijack the thread, but does anyone know the max 20” tire size for the Z’s?
From what I’ve read so far, it sounds like a safe size for the rear is 305/30/20. But, what about the fronts, assuming no rubbing or mods? Thanks everyone |
|
|
|
|
|
#36 |
![]() ![]() ![]() Drives: 2019 zl1 6 speed Join Date: Jul 2017
Location: Lake Havasu Arizona
Posts: 1,135
|
I believe the ps4's can go up to a 315 on the rear of a zl1 and 295 on ss's, because they are smaller than most tires.
|
|
|
|
|
|
#37 | |
![]() Drives: Z06 Join Date: Oct 2021
Location: HTown
Posts: 204
|
Quote:
|
|
|
|
|
|
|
#38 |
![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Drives: 2024 CT5-V Blackwing Join Date: Sep 2020
Location: GA
Posts: 3,556
|
Tire compound is FAR more important for traction than tire width. Your 315 PS4S's are no match for a 305 555R2.
|
|
|
|
|
|
#39 |
![]() Drives: Z06 Join Date: Oct 2021
Location: HTown
Posts: 204
|
|
|
|
|
|
|
#40 |
![]() Drives: 2018 Zl1 Camaro Join Date: Feb 2018
Location: Gainesville, VA
Posts: 149
|
Im running 325/30/ZR20 PS Cup 2 with 5mm spacer and no issues.
__________________
Big Gulp|NW103|SW Headers|UHO CATS|XPipe|Borla Atak|MM CC|Kong Ported|NSX|ATI Damper|DSX 9.45 Lower|ZPE 2.5 Upper|DM Tensioner|FW Green Belt/BTR Gen V LT4 Cam w/32% lobe/BTR VVT Lockout/Pratt & Miller Chain/BTR Pushrods,Valve Springs, Retainers, Hydraulic Lifters & Guide Plate, Trunnion Roller|Katech Valley|KaTech Valve Covers|MSD Coils|DSX E Sensor & Aux Pump|ICT Water Pump|Katech Oil Pump|Cordes & Mishimoto Expansion Tanks|P3 Gauge|LC-2 Wideband Sensor|KaTech Wires|DynoJet Tuned
|
|
|
|
|
|
#41 | |
![]() ![]() ![]() ![]() Drives: 2023 ZL1 Join Date: Dec 2022
Location: Columbus, Ohio
Posts: 1,274
|
Quote:
Also update on my new R555R2's - These babies really hook up nice on the street so far! Pretty impressed so far. I didn't make it out to Tune and Test Evening at Summit/National Trails on 6/28, I really need to get this interchiller installed and get the IATs down when the days are hot here, >85°+ a lot lately! Going to find a nice cool morning and do a Dragy 60mph to 130mph and get a time/distance!
__________________
Katech Track Day CAM 38%•BTR Dual Valve Springs-Johnson Lifters•Trend 3/8 Chromoly Pushrods• VVT Del•CNC Ported Heads•AFM Delete• C5-R Timing Chain•Katech Oil Pump•Katech 112mm•Maggie 2650 3.25” Upper & ATI SD w/10.32” +20%•10 Rib Belt•RFBG•FI Interchiller Stage 2•THPSI Port w/875cc Inj•Dual Drop In Fuel Pump•DSX Aux Pump•Stainless Works 2" w/Legend NPP Axle Back•GESI UHO 4.5" CATs•Brisk RR14S Plugs•BMR Motor Mounts•BMR Cradle Lockout/Bushings Kit•DSS Chromoly DS•RPM 8-Point Roll Cage•10lb FireSense+ w/4Fire SFI 17.1 Fire Sys•Weld Forged Vitesse Rear 17x10 Beadlocks-Front 18x6•Unlocked TCM
|
|
|
|
|
|
|
#42 | |
|
Snackbar Tuning
Drives: 2023 SGM ZL1 Join Date: Oct 2016
Location: Florida
Posts: 1,521
|
Quote:
__________________
GM Gen V Calibrator
|
|
|
|
|
|
|
|
|
|
Post Reply
|
| Thread Tools | |
|
|