03-24-2024, 03:53 PM | #1 |
Drives: Mustang GT350 Join Date: Sep 2023
Location: Virginia
Posts: 9
|
AIM Solo DL2 and Smarty Cam 3 Corsa
Does anyone have this setup? I have the solodl2 and have no real issues with my old smarty cam 2.1. However when I switched to the Corsa3 I cannot get it to register.
The smartycam 2.1 doesn't really have any parameters to set (other than the display). However the the Corsa3 has everything the solodl2 has. I mirrored the Corsa3 to the solodl2 but the car does not report /record any of the data. I figured I would ask here before calling Aim. I have tried every option and combo I can think of and updated all the firmware. |
03-24-2024, 04:36 PM | #2 |
Drives: Mustang GT350 Join Date: Sep 2023
Location: Virginia
Posts: 9
|
configuration captures are attached
|
03-24-2024, 05:11 PM | #3 |
Drives: 2020 Chevy Camaro ZL1 Join Date: Apr 2023
Location: Calgary Canada
Posts: 1,629
|
You should post this in audio, video electronics section. Might get a quicker response.
|
|
|
Post Reply
|
Thread Tools | |
|
|