[CamaroChill]

Tonight, instead of doing what my peers were doing outside (partying and drinking), I told myself I was finally going to fix the hyper-blinking of my new 2016 Camaro turn signal lights that simply make me crazy.

I bought some "anti hyper flash" "error free" LED lights from Amazon and I was finally able to replace the front lights.

The hyper blinking is still there after 2-3 seconds.
Fun fact, with the hazard lights it does NOT hyper blink, only with the turn signal lights.

So I watched a YouTube video on how to replace the tail turn lights and guess what I found when I pulled the light... it's not LED and the connector doesn't fit the LED lights I bought. Maybe that's why the hyper blinking is still there.

Weren't the rear lights supposed to be LED? Now.. how can I install some LED lights if the connector is totally different?

I can see a lot of cables, have no idea what they do.

PS – I'm a DIY Camaro newbie and learning a lot thanks to you guys.

[CamaroChill]

I always forget to add that this is a 2016 1LT Camaro (it should be with the RS package) imported from US, now in EU.

[CalgaryZL1]

Looks like previous owner had a bunch of mods on the car and then tried to put back to stock, you may have to sort out some of that wiring to help find your flashing problem

[CamaroChill]

Originally Posted by CalgaryZL1

Looks like previous owner had a bunch of mods on the car and then tried to put back to stock, you may have to sort out some of that wiring to help find your flashing problem

Thanks. Since I got the Camaro I discovered a passion for getting to know how the car works and specifically the electronics.

How does a newbie learn all of that? Now I’m specifically talking about the wiring.

Regarding the bulb light, is it normal that the connector is not the common connector that I can find for the front lights?