|
|
#1 |
![]() Drives: Camaro 2021 LT1 Join Date: Sep 2023
Location: Florida
Posts: 9
|
Camaro SS Deck lid on LT1
Hello everyone! I have a 2021 LT1 and was thinking to install the Zl1 style spoiler and since my deck lid comes with the stock 7 holes on it I need to change the deck lid. My question is, does the SS deck lid that comes with the holes for the high wind spoiler will fit my LT1?
|
|
|
|
|
|
#2 |
![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Drives: 2018 Camaro 2SS A8 Join Date: Jul 2017
Location: East Tennessee
Posts: 13,450
|
It does, dimensions are the same.
(You'd definitely need a new SS trunk lid even if you were considering patching the existing holes, because those designed for the 3-stanchion spoiler are a stronger design. You'll see that there are several part numbers, make sure you get an SS or a ZL1 lid.)
__________________
2018 Camaro 2SS — G7E MX0 NPP F55 IO6
735 rwhp | 665 rwtq Magnuson TVS 2300 80mm pulley | Kooks 1 7/8" LT headers | JRE smooth idle Terminator cam | LT4 FS & injectors | TSP forged pistons & rods JMS PowerMAX | DSX flex fuel kit | Roto-Fab CAI | Soler 95mm LT5 TB | 1LE wheels | 1LE brakes | BMR rear cradle lockout | JRE custom tune 1100 - 1/30/18 | 2000 - 1/31/18 3000 - 2/06/18 TPW 2/26/18 3400 - 2/19/18 | 3800 - 2/26/18 4300 - 2/27/18 | 4B00 - 3/01/18 4200 - 3/05/18 | 4800 - 3/14/18 5000 - 3/16/18 | 6000 - 3/19/18 |
|
|
|
|
|
#3 |
|
Long hauler
|
+1 on the SS trunk
I had a LT without spoiler and installed the SS spoiler by drilling. It slammed down every time I’d close probably hard enough to cut a finger off clean The SS trunk closes significantly softer comparatively (and safer)
__________________
2022 2SS 1LE - Window Sticker - Cold Air Inductions Elite Carbon CAI
2016 1LT v6 - Totaled Happiness: Infinite |
|
|
|
|
|
#4 |
![]() Drives: Camaro 2021 LT1 Join Date: Sep 2023
Location: Florida
Posts: 9
|
Thank you!
|
|
|
|
|
|
#5 |
![]() Drives: 23' Camaro LT1 Join Date: Mar 2023
Location: Ontario, Canada
Posts: 25
|
I had the zl1 spoiler installed thru my dealership. Looks great. Not out tracking the car but like others said it does close kind of hard if you let go from half open. Otherwise that doesn’t bother me and looks great.
|
|
|
|
|
|
#6 | |
![]() Drives: 2022 2LT RS Convertible Join Date: Apr 2021
Location: Upper Mid-West
Posts: 306
|
Quote:
|
|
|
|
|
|
|
#7 |
![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Drives: 2018 Camaro 2SS A8 Join Date: Jul 2017
Location: East Tennessee
Posts: 13,450
|
I'm not well versed with the convertibles, to be honest. They have their own shorter spoiler, and unlike the coupe, the SS and ZL1 vert gets the same part. Judging from the Chevrolet website, your RS package already has this 3-stanchion spoiler, so the answer is yes, you have the same spoiler as the ZL1 convertible.
__________________
2018 Camaro 2SS — G7E MX0 NPP F55 IO6
735 rwhp | 665 rwtq Magnuson TVS 2300 80mm pulley | Kooks 1 7/8" LT headers | JRE smooth idle Terminator cam | LT4 FS & injectors | TSP forged pistons & rods JMS PowerMAX | DSX flex fuel kit | Roto-Fab CAI | Soler 95mm LT5 TB | 1LE wheels | 1LE brakes | BMR rear cradle lockout | JRE custom tune 1100 - 1/30/18 | 2000 - 1/31/18 3000 - 2/06/18 TPW 2/26/18 3400 - 2/19/18 | 3800 - 2/26/18 4300 - 2/27/18 | 4B00 - 3/01/18 4200 - 3/05/18 | 4800 - 3/14/18 5000 - 3/16/18 | 6000 - 3/19/18 |
|
|
|
|
|
|
|
|
Post Reply
|
| Thread Tools | |
|
|