01-18-2023, 11:24 AM | #43 | |
Drives: 2018 Camaro 2SS A8 Join Date: Jul 2017
Location: East Tennessee
Posts: 12,012
|
Quote:
In addition to E content in E85 and pump gas, now the tank capacity can be configured and red highlights in the chart will follow, plus I added a section to calculate what is actually in the tank based on DIC and alcohol % channel readings. UPDATE: added a new section where one can specify how much ethanol their vehicle can take and the chart will highlight valid complete and partial fill combinations in green. Complete fillup combinations will also have the red rectangle around them. First screenshot shows what the chart looks like when ethanol capability is not entered, the second one shows it with the max ethanol content set to what my car can take.
__________________
2018 Camaro 2SS — G7E MX0 NPP F55 IO6
735 rwhp | 665 rwtq Magnuson TVS 2300 80mm pulley | Kooks 1 7/8" LT headers | JRE smooth idle terminator cam | LT4 FS & injectors | TSP forged pistons & rods JMS PowerMAX | DSX flex fuel kit | Roto-Fab CAI | Soler 95mm LT5 TB | 1LE wheels | 1LE brakes | BMR rear cradle lockout | JRE custom tune 1100 - 1/30/18 | 2000 - 1/31/18 3000 - 2/06/18 TPW 2/26/18 3400 - 2/19/18 | 3800 - 2/26/18 4300 - 2/27/18 | 4B00 - 3/01/18 4200 - 3/05/18 | 4800 - 3/14/18 5000 - 3/16/18 | 6000 - 3/19/18 Last edited by arpad_m; 01-18-2023 at 03:11 PM. |
|
01-18-2023, 11:50 AM | #44 | |
Drives: 2020 LT1 M6 Join Date: Jan 2016
Location: South, the DEEP south
Posts: 1,114
|
Quote:
__________________
[SBE] ECS NOVI 1500 supercharger, 2" Longtube headers, flex fuel, LT4 injectors, LT4 HPFP, baro breakout
Tune date and results to be determined |
|
01-18-2023, 11:57 AM | #45 |
Drives: Chevrolet Camaro LT1 Join Date: Sep 2022
Location: Alberta
Posts: 336
|
Thank-you, Arpad!! Nicely done and very useful! (Well, not useful for me yet as all we can get here locally right now is "up to 10%" pump 91 octane gas, but maybe that will change in the future!)
Jim G |
01-18-2023, 03:12 PM | #46 |
Drives: 2018 Camaro 2SS A8 Join Date: Jul 2017
Location: East Tennessee
Posts: 12,012
|
No problem, guys. I updated it a little to highlight acceptable mixes for a specific car (max ethanol content), see above.
__________________
2018 Camaro 2SS — G7E MX0 NPP F55 IO6
735 rwhp | 665 rwtq Magnuson TVS 2300 80mm pulley | Kooks 1 7/8" LT headers | JRE smooth idle terminator cam | LT4 FS & injectors | TSP forged pistons & rods JMS PowerMAX | DSX flex fuel kit | Roto-Fab CAI | Soler 95mm LT5 TB | 1LE wheels | 1LE brakes | BMR rear cradle lockout | JRE custom tune 1100 - 1/30/18 | 2000 - 1/31/18 3000 - 2/06/18 TPW 2/26/18 3400 - 2/19/18 | 3800 - 2/26/18 4300 - 2/27/18 | 4B00 - 3/01/18 4200 - 3/05/18 | 4800 - 3/14/18 5000 - 3/16/18 | 6000 - 3/19/18 |
01-18-2023, 05:46 PM | #47 |
Drives: Chevrolet Camaro LT1 Join Date: Sep 2022
Location: Alberta
Posts: 336
|
|
01-18-2023, 06:09 PM | #48 |
Drives: 2018 Camaro 2SS A8 Join Date: Jul 2017
Location: East Tennessee
Posts: 12,012
|
I did, the attachment is the new file, check it out. This ain't github, that's for sure, but I don't intend to mess with this much if any more.
__________________
2018 Camaro 2SS — G7E MX0 NPP F55 IO6
735 rwhp | 665 rwtq Magnuson TVS 2300 80mm pulley | Kooks 1 7/8" LT headers | JRE smooth idle terminator cam | LT4 FS & injectors | TSP forged pistons & rods JMS PowerMAX | DSX flex fuel kit | Roto-Fab CAI | Soler 95mm LT5 TB | 1LE wheels | 1LE brakes | BMR rear cradle lockout | JRE custom tune 1100 - 1/30/18 | 2000 - 1/31/18 3000 - 2/06/18 TPW 2/26/18 3400 - 2/19/18 | 3800 - 2/26/18 4300 - 2/27/18 | 4B00 - 3/01/18 4200 - 3/05/18 | 4800 - 3/14/18 5000 - 3/16/18 | 6000 - 3/19/18 |
01-18-2023, 06:23 PM | #49 | |
Drives: Chevrolet Camaro LT1 Join Date: Sep 2022
Location: Alberta
Posts: 336
|
Quote:
Not a big deal though. The worksheet is great even without that added feature! Jim G |
|
01-18-2023, 06:30 PM | #50 | |
Drives: 2018 Camaro 2SS A8 Join Date: Jul 2017
Location: East Tennessee
Posts: 12,012
|
Quote:
__________________
2018 Camaro 2SS — G7E MX0 NPP F55 IO6
735 rwhp | 665 rwtq Magnuson TVS 2300 80mm pulley | Kooks 1 7/8" LT headers | JRE smooth idle terminator cam | LT4 FS & injectors | TSP forged pistons & rods JMS PowerMAX | DSX flex fuel kit | Roto-Fab CAI | Soler 95mm LT5 TB | 1LE wheels | 1LE brakes | BMR rear cradle lockout | JRE custom tune 1100 - 1/30/18 | 2000 - 1/31/18 3000 - 2/06/18 TPW 2/26/18 3400 - 2/19/18 | 3800 - 2/26/18 4300 - 2/27/18 | 4B00 - 3/01/18 4200 - 3/05/18 | 4800 - 3/14/18 5000 - 3/16/18 | 6000 - 3/19/18 |
|
01-18-2023, 06:49 PM | #51 |
SNSTRSS
|
I use an app on my phone called E85 Blend that I found on the google app store. You just input some data like tank capacity current E content percentage and some other fields and then put in what you want E content to be. It shows you how many gallons of 93 and E85 to put in to get to your desired percentage. Very easy to use and works great.
__________________
2016 Black Camaro 2SS A8 NP
|
01-19-2023, 07:01 PM | #52 |
Drives: 2022 Camaro 2SS 1LE Join Date: Nov 2021
Location: NC
Posts: 299
|
I just installed my P3 gauge and went and filled up the tank. Being e50 need to do 8 gallons of 93 and 9 of 85 to get that e50 mix. Actually to get it close if I must say honestly. The best thing about the gauge is I can see the blend real time as I'm driving.
__________________
p1sc1 factory box w/ stage 2 intercooler, Lt4 fueling, JMS BAP, lt2 intake, kooks 1/78 longtube headers w/ h/f cats, alky meth kit, thpsi port injection
|
|
|
Post Reply
|
Thread Tools | |
|
|