09-15-2022, 10:52 AM | #29 |
Drives: 2018 Camaro SS vert Join Date: Oct 2020
Location: CT
Posts: 449
|
This is mine, hydrographics, custom paint, LEDs, etc
__________________
|
09-15-2022, 03:55 PM | #30 |
Having FUN in the SUN...
Drives: 2022 M6 ZL1 1LE Join Date: Jan 2022
Location: San Diego CA
Posts: 1,195
|
Your OCD is working well on this project!!!
__________________
2022 M6 ZLE: Katech Standard Ported Blower + Ported Heads + 103mm TB + Oil Pump + C5R Chain + Valve Covers + Coil Relocation Kit
TSP VVT and DoD Delete Covers + LME Chain Guide + DSX Billet Lid + ATI Damper + 9.17" Lower + 2.4" Upper + MM Wild CC + RF BG Coated AR Headers + GESI UHO Cats + V Bands + AWE Touring + Magnaflow Center X + MSD Coils + Banks iDash + JMS Booster ALL the BMR Read End Goodies + BMR Motor Mounts + JRE Terminator Cam Package + FIC 30 + DMS Front HX + Fender Tank GMS High Flow Impact Bar + GMS Stage II Oil Cooler + GMS Stage III HX System = 770rwhp 815rwtq @E55 13.5psi |
09-15-2022, 04:56 PM | #31 |
Drives: 2017 Chevrolet Camaro ZL1 Join Date: Jul 2018
Location: Canton, GA
Posts: 452
|
We usually keep it pretty simple but clean.
__________________
2017 ZL1 - PB 7.85 @ 175 MPH @ 3682 lbs @ 1313 DA (work in progress)
Built by Vengeance Racing, tuned by Elite Tuned |
09-15-2022, 05:05 PM | #32 |
Drives: '20 ZLE Join Date: Jun 2020
Location: Mile High
Posts: 3,815
|
Yea, I agree. Mine is even simpler, which is the way I like it when we plan to work on it, which is all the time. I'm at the bare bones end of the scale while some here are on the car show end. Cars would be boring otherwise.
__________________
'20 ZL1LE A10.
LME 390, E2650, FBO. 1116/967. 15" conversion/Weld/MT ET Street R 325/50R15. 100 octane: 1.35/9.25/151 at 3500 ft. (only one pass so far). 100% meth/100 octane: Alky Twin 10+10 MAF; No dyno or ET. Last edited by JSH; 09-18-2022 at 08:10 AM. |
09-15-2022, 05:37 PM | #33 |
Mine.If you look closely you can see my port injection rails.
|
|
09-17-2022, 01:34 PM | #34 |
Having FUN in the SUN...
Drives: 2022 M6 ZL1 1LE Join Date: Jan 2022
Location: San Diego CA
Posts: 1,195
|
Love your billet lid! who makes that one?
__________________
2022 M6 ZLE: Katech Standard Ported Blower + Ported Heads + 103mm TB + Oil Pump + C5R Chain + Valve Covers + Coil Relocation Kit
TSP VVT and DoD Delete Covers + LME Chain Guide + DSX Billet Lid + ATI Damper + 9.17" Lower + 2.4" Upper + MM Wild CC + RF BG Coated AR Headers + GESI UHO Cats + V Bands + AWE Touring + Magnaflow Center X + MSD Coils + Banks iDash + JMS Booster ALL the BMR Read End Goodies + BMR Motor Mounts + JRE Terminator Cam Package + FIC 30 + DMS Front HX + Fender Tank GMS High Flow Impact Bar + GMS Stage II Oil Cooler + GMS Stage III HX System = 770rwhp 815rwtq @E55 13.5psi |
09-17-2022, 02:13 PM | #35 |
Previously CS10SS
Drives: 2017 ZL1 A10 Join Date: Jan 2017
Location: Toledo, OH
Posts: 293
|
__________________
'02 Trans AM - sold
'05 SRT4 - sold '05 STI - sold '96 300ZX - sold '10 2SS/RS M6 455rwhp - sold '13 ZL1 M6 720rwhp - sold '17 ZL1 A10 930rwhp - Katech Built |
09-17-2022, 03:30 PM | #36 |
09-17-2022, 08:28 PM | #37 |
Petro-sexual
|
__________________
'20 ZL1 Black "Fury" A10, PDR, Exposed CF Extractor Magnuson Magnum DI TVS2650R // RFBG // Soler 103 // TooHighPSI Port Injection // THPSI Billet Lid // FF // Katech Drop-In // PLM Heat Exchanger // ZLE Cradle bushings // BMR Chassis-Suspension Stuff // aFe Bars // Diode Dynamics LEDs // ACS Composites Guards // CF Dash // Aeroforce // tint // other stuffs |
10-04-2022, 08:17 AM | #38 |
Drives: 18 zl1 garnet red Join Date: Aug 2021
Location: TX
Posts: 287
|
ZL1 Engine Bay pics
I haven't seen a thread dedicated to showing the engine bay... If there is one, I missed it. This can give others ideas, cold air systems, valve covers, SC lids etc. Mine is missing two clamps that Corsa is sending over.
__________________
IG - @zl1_will
2022 zl1 740hp / 730tq stolen 2018 zl1 Maggie - 2" headers - flex fuel - lowside fuel ssytem - +30 injectors - cordes ice tank - spl rear linkage arms |
10-04-2022, 09:17 AM | #39 |
Drives: 2023 Black ZL1 Auto Join Date: Oct 2009
Location: FEMA Region 4
Posts: 2,936
|
There is another recent thread with some nice pics. Your Corsa intake looks great.
|
10-04-2022, 09:27 AM | #40 |
Drives: 18 zl1 garnet red Join Date: Aug 2021
Location: TX
Posts: 287
|
Dang it. Thanks sir Thank you to whoever moved me to the appropriate thread
__________________
IG - @zl1_will
2022 zl1 740hp / 730tq stolen 2018 zl1 Maggie - 2" headers - flex fuel - lowside fuel ssytem - +30 injectors - cordes ice tank - spl rear linkage arms |
10-04-2022, 10:11 AM | #41 |
Drives: 18 Black ZL1-1LE Join Date: Jun 2017
Location: Kennesaw, Ga
Posts: 201
|
Just a baby compared to others here but perfect power for Roadracing!
|
10-04-2022, 10:17 AM | #42 |
Drives: 18 Black ZL1-1LE Join Date: Jun 2017
Location: Kennesaw, Ga
Posts: 201
|
|
|
|
Post Reply
|
Thread Tools | |
|
|