installation instructions oil pump ZL1

MKH · 10-02-2022, 09:15 AM

Hello together

Unfortunately, my ZL1 has also caught this weekend with the defective oil pump.

my car has soon 21 Tds KM on the clock and was registered in December 2017 but is a 2018 model.

Since I come from Europe and here practically no one can perform this work or wants to now my question to the forum has someone an installation guide or is there one of GM itself which gives a good overview of how to replace such a pump?

The right pump I have already bought the Katech.

I hope I can be helped here.... I need help as soon as possible to install.

Greetings

arpad_m · 10-02-2022, 12:25 PM

PM sent

lebadduv · 10-03-2022, 07:39 AM

Hello,

I am exactly in the same case. Camaro ZL1 01/2018 - 16000 mi

If anyone has information on disassembly and reassembly that would be a great help.

ZLRob · 10-03-2022, 04:38 PM

Hopefully this helps you guys out a bit it entails a full camp swap, which also involves messing with the oil pump. I found it last night when searching for some info myself.

https://youtu.be/S-Nf8bpg7HA

10-02-2022, 09:15 AM	#1
MKH Drives: Chevrolet Camaro ZL1 2018 AT,Coupe Join Date: Apr 2022 Location: MB Posts: 2	installation instructions oil pump ZL1 Hello together Unfortunately, my ZL1 has also caught this weekend with the defective oil pump. my car has soon 21 Tds KM on the clock and was registered in December 2017 but is a 2018 model. Since I come from Europe and here practically no one can perform this work or wants to now my question to the forum has someone an installation guide or is there one of GM itself which gives a good overview of how to replace such a pump? The right pump I have already bought the Katech. I hope I can be helped here.... I need help as soon as possible to install. Greetings Last edited by MKH; 10-02-2022 at 09:47 AM.

10-02-2022, 12:25 PM	#2
arpad_m Drives: 2018 Camaro 2SS A8 Join Date: Jul 2017 Location: East Tennessee Posts: 13,476 View My Garage	PM sent __________________ 2018 Camaro 2SS — G7E MX0 NPP F55 IO6 735 rwhp \| 665 rwtq Magnuson TVS 2300 80mm pulley \| Kooks 1 7/8" LT headers \| JRE smooth idle Terminator cam \| LT4 FS & injectors \| TSP forged pistons & rods JMS PowerMAX \| DSX flex fuel kit \| Roto-Fab CAI \| Soler 95mm LT5 TB \| 1LE wheels \| 1LE brakes \| BMR rear cradle lockout \| JRE custom tune 1100 - 1/30/18 \| 2000 - 1/31/18 3000 - 2/06/18 TPW 2/26/18 3400 - 2/19/18 \| 3800 - 2/26/18 4300 - 2/27/18 \| 4B00 - 3/01/18 4200 - 3/05/18 \| 4800 - 3/14/18 5000 - 3/16/18 \| 6000 - 3/19/18

10-03-2022, 07:39 AM	#3
lebadduv Drives: Camaro ZL1 2018 Join Date: Sep 2011 Location: Belgium Posts: 30	Hello, I am exactly in the same case. Camaro ZL1 01/2018 - 16000 mi If anyone has information on disassembly and reassembly that would be a great help. __________________ Camaro 1SS pack RS Kit K&N Catback Borla tune Lsx Calibration

10-03-2022, 04:38 PM	#4
ZLRob Super Stock Drives: Chevrolet Camaro ZL1 Join Date: May 2022 Location: Concordia Posts: 1,004	Hopefully this helps you guys out a bit it entails a full camp swap, which also involves messing with the oil pump. I found it last night when searching for some info myself. https://youtu.be/S-Nf8bpg7HA __________________ 2017 Red Hot ZL1 A10 - Apex ARC-8's, 305/ 325 PS4's, DSX 9.06 12% lower, Griptec OE upper, NGK HR7 Ruthenium plugs, Nostrum 25+ injectors, XDI Goliath HPFP, Katech dual in tank LPFP, Katech oil pump, LME tensioner, DOD delete, LT1 big fuel cam, Jokerz ported blower, MPI lid, GMS hood extractor bracket, Granatelli SS plug wires, Cordes LTR reservoir, DMS T-stat housing, 186* LS3 T-stat, Borla X pipe, Black Widow Angry Housewife/ Corsa NPP mufflers, BMR engine mounts, Banks iDash, Lithium Battery, AEM X- Series, HP Tuners, E85, 16.5 psi 758 HP/ 804 TQ

User Name		Remember Me?
Password