Katech ZL1 Build - Page 9

mayracn · 01-14-2022, 03:30 PM

What cam is that? Dont see max effort from them.

Quote:

Originally Posted by 2020ZL11LE

This thing is an absolute beast, picked it up yesterday from MI to drive it back to PA. I had a permanent smile for the first hour of the drive. It base dyno'd at 541 wheel, made 861 after the stage 5 upgrade. Granted the roads were cold but I could easily haze the tires at 100mph, with traction control on! She now demands respect!

The max effort cam is absurd, feels like a knarly beast now!

laynlo15 · 01-14-2022, 04:57 PM

Quote:

Originally Posted by 2020ZL11LE

This thing is an absolute beast, picked it up yesterday from MI to drive it back to PA. I had a permanent smile for the first hour of the drive. It base dyno'd at 541 wheel, made 861 after the stage 5 upgrade. Granted the roads were cold but I could easily haze the tires at 100mph, with traction control on! She now demands respect!

The max effort cam is absurd, feels like a knarly beast now!

So that is a wicked build for sure. Be careful at 100 mph and spinning the tires.

My 2016 SS made real similar numbers and remember logging some street runs and it would blow the tires off at over 100 mph so everyone should be aware that 850 rwhp plus on anything other then a drag radial for the street will eat your lunch for sure. Never ran it on street tires again for logging. Plus it ran 9.40@147 so not to shabby for 3900 lbs with driver.
Great build and always loved my 2650 Maggie, nothing like getting blown at 100 mph.

Katech_Mike · 01-18-2022, 02:58 PM

Quote:

Originally Posted by mayracn

What cam is that? Don't see max effort from them.

I don't have it listed online. It's in the 23x/25x range.

Motor Fast · 04-30-2022, 10:22 PM

Video?

ZLAV1N · 06-09-2022, 12:09 PM

Round 2 @ Katech:

Fore Innovations Triple In-Tank Pump
DSX Flex Fuel Kit
Crawford Racing CR Fueler 2.0 HP
Too High PSI Magnuson 2650R Port Injection Kit
80mm Pulley
Katech Max Effort Camshaft
10 Rib Belt Conversion Kit
Interchiller

pauly1119 · 06-09-2022, 01:46 PM

Awesome!! If not asked yet what did it cost you?

JSH · 06-09-2022, 03:34 PM

Quote:

Originally Posted by pauly1119

Awesome!! If not asked yet what did it cost you?

He kept the OEM short block and changed everything else, so $25-35k would be a reasonable guess

ZX-10R · 06-09-2022, 06:09 PM

You have to really love these cars because those mods are usually a zero return investment

Evansa22 · 06-09-2022, 07:05 PM

Pretty much all mods are a zero return investment, including the cars themselves. If you want to talk return on investment,, you're in the wrong forum. We do it because we love cars and wanna go faster. Gotta pay to play and I think most of us understand that, op's car is a beast and katech did a great job! Enjoy that thing

pauly1119 · 06-09-2022, 07:24 PM

Looks like it was done right. Good luck with the car! I’m sure it’s a beast.

Choda · 06-10-2022, 09:28 AM

awesome build

Raisin Man · 06-10-2022, 06:37 PM

Quote:

Originally Posted by Choda

awesome build

Agreed. I’ve owned a C6 Corvette Katech “Track Attack” with a warmer cam, Kooks headers, larger dry sump, larger throttle body, Brembos, coil-overs, etc., etc. for 10 years. Naturally aspirated, LS7. Still kicks butt. No maintenance / reliability problems.

04-30-2022, 10:22 PM	#116
Motor Fast Drives: 2018 Camaro SS 1LE Join Date: Jun 2020 Location: Florida Posts: 226	Video? __________________ 2002 Camaro SS \| 2003 Corvette Z06 \| 2008 Corvette \| 2012 Corvette ZR1 Inferno Orange with PDE \| 2016 Corvette Z06 C7.R \| 2018 Yenko Camaro

06-09-2022, 12:09 PM	#117
ZLAV1N Previously CS10SS Drives: 2017 ZL1 A10 Join Date: Jan 2017 Location: Toledo, OH Posts: 302	Round 2 @ Katech: Fore Innovations Triple In-Tank Pump DSX Flex Fuel Kit Crawford Racing CR Fueler 2.0 HP Too High PSI Magnuson 2650R Port Injection Kit 80mm Pulley Katech Max Effort Camshaft 10 Rib Belt Conversion Kit Interchiller __________________ '02 Trans AM - sold '05 SRT4 - sold '05 STI - sold '96 300ZX - sold '10 2SS/RS M6 455rwhp - sold '13 ZL1 M6 720rwhp - sold '17 ZL1 A10 930rwhp - Katech Built

06-10-2022, 09:28 AM	#123
Choda Drives: Turbo 6.2 Join Date: Feb 2019 Location: Buffalo Posts: 736	awesome build __________________ 2016 Twin Turbo Camaro SS - 968hp/970tq 8.9@153 2018 LTZ Z71 Redline Silverado - 381hp/420tq 13.8@100

06-09-2022, 01:46 PM	#118
pauly1119 Drives: 2018 ZLE Join Date: Feb 2018 Location: Palm City Fl Posts: 1,371	Awesome!! If not asked yet what did it cost you?

06-09-2022, 06:09 PM	#120
ZX-10R Drives: 2019 ZL1 Riverside Join Date: Apr 2020 Location: Charlotte, NC Posts: 1,139	You have to really love these cars because those mods are usually a zero return investment

06-09-2022, 07:05 PM	#121
Evansa22 Drives: 2018 HBM ZLE Join Date: Aug 2017 Location: In the garage Posts: 886	Pretty much all mods are a zero return investment, including the cars themselves. If you want to talk return on investment,, you're in the wrong forum. We do it because we love cars and wanna go faster. Gotta pay to play and I think most of us understand that, op's car is a beast and katech did a great job! Enjoy that thing

06-09-2022, 07:24 PM	#122
pauly1119 Drives: 2018 ZLE Join Date: Feb 2018 Location: Palm City Fl Posts: 1,371	Looks like it was done right. Good luck with the car! I’m sure it’s a beast.

User Name		Remember Me?
Password