You are browsing camaro6 
05-23-2021, 11:14 AM
|
#1 |
          
Drives: '20 ZLE Join Date: Jun 2020
Location: Mile High
Posts: 4,195
|
M&H 325/45R17 DR
Does anyone know if this DR will fit a '20 ZLE? I know that many 315 and 325 won't fit, but... I have emailed them.
https://www.mandhtires.com/M-H-Drag-...ials/325-45R17
__________________
2020 ZL1LE A10.
LME LT4 390 short block, LME CID Heads, Kong E2650, FBO. 15" conversion, MT ET Street R 325/15. 100 octane: 1045hp/1055tq. 100 octane + Meth (1x10+): 1117 hp/1067 tq |
|
|
|
05-24-2021, 07:52 AM
|
#2 |
|
Drives: 2019 ZL1 Join Date: Oct 2019
Location: GA
Posts: 573
|
315/35R17's work for sure on a 17x11 rear wheel, see link below, but not sure on the ones you noted. If thats good enough for 1100+ rwhp, I'd give that a shot. You will enhance your torque from the gearing effect by going to a shorter tire height and its a VERY noticeable gain.
I run 275/30R17 front PS4S's and 295/30R19 R888R rears and they work incredibly well. You could do a 285/30R19 and 305/30R19 setup if you want stock width, but the 295/30R19 R888R's are very similar in width to the OEM 305/30R20 rear F1 Supercars. Link: https://forgeline.com/customer-gallery/doug-wheelover-2 |
|
|
|
|
|
|
|
|
Post Reply
|
| Tags |
| m&h 325/45r17 dr |
| Thread Tools | |
|
|
