03-19-2020, 10:15 PM | #1 |
Drives: 2017 Camaro SS Join Date: Sep 2015
Location: Kansas
Posts: 22
|
2017 SS 416 c.i. built
Tossing around the idea of selling the camaro. Only reason for selling is to purchase a home, no other reason. It's a '17 1SS with 7k miles. 2nd owner. Quick run down of the car is as follows: (any questions feel free to ask)
416 C.I. Manley rotating assembly Camshaft is modest at 242/258 .700 lift at .050 CID heads Texas Speed Rockers VVT Deleted ATI Balancer Welds S71 15x10 Alumistar 17x4.5 Currently On MT 275x10.5 Slicks BMR adjustable Rear Suspension Links BMR Rear Cradle Brace BMR Subframe connectors Solid Rear Cradle Bushings (yes its noisy) BMR Rear Springs BMR Front Springs Viking double adjustable shocks Holly Hi ram Nick Williams 102mm TB Full Stainless works Exhaust 2" headers 3" out back Carlyle kit 15" conversion 1 piece DS Solid motor mounts Circle D 4200/4400 converter Flaming river manual rack DSX Flex Fuel Kit E85 tuned Has AEM AFR gauge (no pod been lazy) Depending on dyno car makes 540-570whp Car has had some weight reduction. No wipers, or transmission. Rear seats and all trunk lining out. Front crash bar has been cut. Aux coolers removed. still has all ac on vehicle and blows cold. Car weighed 3250 if I remember correctly. My plan was to put the bottle to it, unfortunately plans just didnt go as expected. Will go 6.60s@105ish 1/8mile 1.4x Short time Tuned by Ryan. My family has gotten bigger and I really dont have the time I once did for it. I'm not 100% sold on the idea of parting ways, but if someone shows enough interest in the car, I will definitely consider it. I would much rather see it doing what its built to do, rather than holding the garage floor down. As far as price goes, i would say 35k or best reasonable offer. I have some of the factory parts, including the seats and trunk liner, as well as some misc nitrous stuff laying around that can go with the car for the right price. Please DM for inquires. I can upload or send more photos/videos if requested. Thank you for looking. Last edited by EGOKLR; 11-18-2020 at 01:38 PM. |
03-21-2020, 11:35 AM | #2 |
Full Fledged Member
|
Now that's some serious dedication to reducing weight
Sorry, had to GLWS!
__________________
'18 1SS 1LE - DD
'72 Cutlass - LSA topped 370" LS2 |
04-02-2020, 11:44 AM | #3 |
Drives: 2017 Camaro SS Join Date: Sep 2015
Location: Kansas
Posts: 22
|
|
06-20-2020, 06:53 PM | #4 |
Drives: 2017 Camaro SS Join Date: Sep 2015
Location: Kansas
Posts: 22
|
As time goes on, I realise how much I really dont need the car anymore. Sad feeling, but ive been through it a thousand times. Feel free to make reasonable offers, I will entertain them. Thanks again
|
07-19-2020, 01:28 PM | #5 |
Drives: 2020 LT1 Coupe Join Date: Jul 2020
Location: Ok
Posts: 24
|
Is car still for sale? If so message me with your contact info please sir.
|
10-16-2020, 07:54 PM | #6 |
Drives: 2017 Camaro SS Join Date: Sep 2015
Location: Kansas
Posts: 22
|
No mercy 11 weekend bump.
|
11-18-2020, 01:38 PM | #7 |
Drives: 2017 Camaro SS Join Date: Sep 2015
Location: Kansas
Posts: 22
|
Uploaded more pics for those asking.
|
11-18-2020, 03:00 PM | #8 |
Drives: 2022 Lt1 A10 Join Date: Nov 2015
Location: clark, mo
Posts: 8,873
|
Really nice setup, 10.40s@130 would be the 1/4 mile conversion from the 1/8 mile you listed. Pretty stellar
__________________
2022 Lt1 6.2 A10, Maggie 2300, THPSI Port Inj/10 rib, Rotofab, E, Nickey, SCOL, Griptech, RC Bandits, Hoosiers/MT 9.80@142.96 1.44 60ft, 6.34@112 707/669 RWHP/TRQ. 16SS Maggie 2650 9.41@147 1.35 60ft, 5.99@119. 16 C7 A8 10.90@128 Bolt on stuff
|
11-18-2020, 06:49 PM | #9 |
Drives: 2017 Camaro SS Join Date: Sep 2015
Location: Kansas
Posts: 22
|
Hit the nail right on the head. Has been 10.43@130mph with a 1.46 short time. DA approx +350. One of the very few times we have good air here in KS in early spring. Thx for the kind words!
|
11-19-2020, 06:07 AM | #10 |
Drives: 2022 Lt1 A10 Join Date: Nov 2015
Location: clark, mo
Posts: 8,873
|
Its a cool Camaro. Do you drive it much on the street? What have you taken out to get the weight down?
__________________
2022 Lt1 6.2 A10, Maggie 2300, THPSI Port Inj/10 rib, Rotofab, E, Nickey, SCOL, Griptech, RC Bandits, Hoosiers/MT 9.80@142.96 1.44 60ft, 6.34@112 707/669 RWHP/TRQ. 16SS Maggie 2650 9.41@147 1.35 60ft, 5.99@119. 16 C7 A8 10.90@128 Bolt on stuff
|
11-28-2020, 11:19 AM | #11 |
Drives: 2017 Camaro SS Join Date: Sep 2015
Location: Kansas
Posts: 22
|
Sold.
|
|
|
Post Reply
|
Thread Tools | |
|
|