|
|
#1 |
![]() Drives: 2015 Black Z28 Join Date: Oct 2017
Location: Louisville, Kentucky
Posts: 89
|
Best alcohol injection
What is the Best alcohol injection? I know I will need a tune to get the maximum performance but is it necessary to have it tuned? And how much HP can I gain with no tune verse with a tune. (2018 camaro SS 6speed, D1 Procharger)
|
|
|
|
|
|
#2 |
![]() ![]() ![]() Drives: 2016 Camaro SS Join Date: Sep 2018
Location: Bartlett, TN
Posts: 1,121
|
I used Alky Control on my 4th gen, not planning on running meth on this car.
|
|
|
|
|
|
#3 |
|
Drives: 2022 Lt1 A10 Join Date: Nov 2015
Location: clark, mo
Posts: 8,882
|
I have the AEM with 1-1000cc nozzle but have run 2 nozzles in the past. Yes you need a tune.
|
|
|
|
|
|
#4 |
![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Drives: 2016 1SS NFG A8 Join Date: Aug 2017
Location: 46804
Posts: 7,663
|
Yep you need a tune. It will run rich if you don't. Meth has to be treated like additional fueling for it to work or your engine runs rich. DI motors don't like to run rich...so it's not like port injected stuff where you could use it for cooling only and run a little richer. The fuel system will need leaned out some. There is a fine line there...For a rough example, I know some will tune for .85 lambda on fuel system, then spray meth to get it back into the .82 range. This way if the meth fails it goes a little lean but doesn't nuke the engine.
__________________
2016 NFG SS A8/Whipple 2.9/Fuel System/Flex Fuel |
|
|
|
|
|
#5 |
![]() Drives: Turbo 6.2 Join Date: Feb 2019
Location: Buffalo
Posts: 736
|
I have been using alky control with devils own screw in nozzles on my last two turbo setups. Never had an issue. The amount of power it makes is not clear to me. I never added meth and only meth. My tuner adjusts the whole tune when using meth and I have always added boost when adding meth.
__________________
2016 Twin Turbo Camaro SS - 968hp/970tq 8.9@153
2018 LTZ Z71 Redline Silverado - 381hp/420tq 13.8@100 |
|
|
|
|
|
#6 |
![]() Drives: 2016 Camaro SS Join Date: Jul 2016
Location: Korea
Posts: 417
|
Can anyone recommand the location of nozzles for the spraying equally to each cylinders? I am planning to put 4~6 nozzles for it.
|
|
|
|
|
|
#7 |
|
Drives: 2022 Lt1 A10 Join Date: Nov 2015
Location: clark, mo
Posts: 8,882
|
Devilsown has a kit you can use and a couple guys with 2650 Maggies are spraying into the intercoolers thru the lid instead of the elbow. Mine are still in the elbow but I'm changing mine also to the lid. Gen6mike is using the same pump that comes with the Meth kits and it looks cool running into the lid.
|
|
|
|
|
|
#8 | |
![]() Drives: 2016 Camaro SS Join Date: Jul 2016
Location: Korea
Posts: 417
|
Quote:
|
|
|
|
|
|
|
|
|
|
Post Reply
|
| Thread Tools | |
|
|