2019+ SS 1LE Splitter on a 2017 SS 1LE - Page 2

Stan1ley · 01-10-2020, 01:13 PM

Quote:

Originally Posted by Mov Ov3r

I am right there with you, no point in spending that money when something minor can destroy it.

Yep! Because that would suck and I wouldn’t be happy.

Stan1ley · 01-10-2020, 01:14 PM

Quote:

Originally Posted by kropscamaro16

i agree and feel you i wanted my acs spoiler for so long but it was pricey finally found a good deal on one last year so i got it!

Well that makes it a bit better for you.

kropscamaro16 · 01-10-2020, 01:18 PM

yup and it was in stock and local so no ship cost!

Mov Ov3r · 01-10-2020, 01:52 PM

Quote:

Originally Posted by kropscamaro16

yup and it was in stock and local so no ship cost!

I keep telling myself to go to Summit in Arlington Tx. but I know I will end up spending entirely too much money if I come across something I like

Mike2SS1LE · 01-10-2020, 08:05 PM

I think it looks good imo

Devius83 · 01-10-2020, 09:18 PM

The lines do not match up with the 2017, i dont like it looks like your trying to be a 2019

JROC · 01-10-2020, 10:34 PM

Nice looking car OP.

I actually think the 17/18 splitter looks nice on the 19's. You can see a picture of this combo if you go on Chevys website and build a SS.

I like how the 19 (and I assume 20) splitter looks on the 17/18, but I doubt I'd change it if I owned a 17/18. I dont plan to change my 19's splitter either.

Uncle Sam · 01-10-2020, 10:44 PM

Looks awesome! Nice to know it can be done.

Eldi Z · 01-11-2020, 10:33 AM

[QUOTE=Stan1ley;10695076]So I have attached some photos and a direct link to my YouTube channel detailing my install of the 2019 1LE front splitter 2017/2018 1LE's.

It is a direct install for any car with a factory installed splitter.

Looks very nice indeed

Questions:
1.) How much does it cost?
2.) Is it really a direct fit (same as the Part# for the 17/18 installs) without any modifications / drilling new holes, Etc.?

Chris C 1SS 1LE · 01-12-2020, 09:23 AM

Timely. Thanks. I'm getting one of these.

arpad_m · 01-12-2020, 10:31 AM

Looks pretty aggressive, congrats

I personally don't care for that extra ridge this style of splitter adds between the fascia and the top of the splitter (best visible from a side angle), it feels weird to me. With that said, I do see the attractiveness in the fangs.

Laststandard · 01-13-2020, 10:09 AM

Quote:

Originally Posted by arpad_m

Looks pretty aggressive, congrats

I personally don't care for that extra ridge this style of splitter adds between the fascia and the top of the splitter (best visible from a side angle), it feels weird to me. With that said, I do see the attractiveness in the fangs.

That's exactly what has me torn on it. I like the fangs, but it doesn't quite blend in like the 17-18 splitter does.

Stan1ley · 01-20-2020, 09:08 AM

Quote:

Originally Posted by Devius83

The lines do not match up with the 2017, i dont like it looks like your trying to be a 2019

Just being unique is what I call it. I like incorporating different factory elements to create a new look. Play with peoples mind. If I wanted a 19 I would just buy one.

Stan1ley · 01-20-2020, 09:10 AM

Quote:

Originally Posted by JROC

Nice looking car OP.

I actually think the 17/18 splitter looks nice on the 19's. You can see a picture of this combo if you go on Chevys website and build a SS.

I like how the 19 (and I assume 20) splitter looks on the 17/18, but I doubt I'd change it if I owned a 17/18. I dont plan to change my 19's splitter either.

Yes to me both versions of the the splitters look good and are interchangeable in my opinion.

01-10-2020, 01:18 PM	#17
kropscamaro16 Drives: 2016 1ss camaro Join Date: Feb 2016 Location: 909 Posts: 10,134	yup and it was in stock and local so no ship cost! __________________ 16 1SS NIGHTFALL GRAY METALLIC WITH NPP #BECAUSERACECAR #SAVETHEMANUALS

01-10-2020, 08:05 PM	#19
Mike2SS1LE Drives: 2018 Camaro 2SS 1LE Join Date: Sep 2018 Location: Port Orange, Florida Posts: 38	I think it looks good imo __________________ 2018 2SS 1LE, Hyper Blue, PDR, Xpel front end, tint, GM strut tower brace, CAGS harness, Rotofab dry w/sound delete, MBRP axleback, GM dark Taillights, reverse LED’s, GM dark 3rd brake light w/ rapid fire harness, LED front turn signals, dark smoke sidemarker w/ LED’s, ZL1 add on splash guards, tow hook, ZL1 suede dash pad, suede knee pads, 1LE dash plate, 1LE steering wheel badge, 1LE fender badges, Weathertech mats, more to come... 2009 Challenger SRT8, B5 Blue, Procharged (SOLD)

01-12-2020, 09:23 AM	#24
Chris C 1SS 1LE Drives: 2017 1LE Join Date: Nov 2017 Location: Brooks, GA Posts: 697	Timely. Thanks. I'm getting one of these. __________________ '17 Bright Yellow 1LE. PDR, STB, !CAGS Borla 60606, 11925. Tony Mamo ported TB, ROTOFAB, !Sound Tube

01-12-2020, 10:31 AM	#25
arpad_m Drives: 2018 Camaro 2SS A8 Join Date: Jul 2017 Location: East Tennessee Posts: 13,438 View My Garage	Looks pretty aggressive, congrats I personally don't care for that extra ridge this style of splitter adds between the fascia and the top of the splitter (best visible from a side angle), it feels weird to me. With that said, I do see the attractiveness in the fangs. __________________ 2018 Camaro 2SS — G7E MX0 NPP F55 IO6 735 rwhp \| 665 rwtq Magnuson TVS 2300 80mm pulley \| Kooks 1 7/8" LT headers \| JRE smooth idle Terminator cam \| LT4 FS & injectors \| TSP forged pistons & rods JMS PowerMAX \| DSX flex fuel kit \| Roto-Fab CAI \| Soler 95mm LT5 TB \| 1LE wheels \| 1LE brakes \| BMR rear cradle lockout \| JRE custom tune 1100 - 1/30/18 \| 2000 - 1/31/18 3000 - 2/06/18 TPW 2/26/18 3400 - 2/19/18 \| 3800 - 2/26/18 4300 - 2/27/18 \| 4B00 - 3/01/18 4200 - 3/05/18 \| 4800 - 3/14/18 5000 - 3/16/18 \| 6000 - 3/19/18

01-10-2020, 09:18 PM	#20
Devius83 Drives: 2019 2SS 1LE Satin Steel Metallic Join Date: Dec 2010 Location: Vancouver BC Posts: 56 View My Garage	The lines do not match up with the 2017, i dont like it looks like your trying to be a 2019

01-10-2020, 10:34 PM	#21
JROC Account Suspended Drives: 19 Camaro SS 1LE, 03 Ford Lightning Join Date: Nov 2019 Location: South Carolina Posts: 334	Nice looking car OP. I actually think the 17/18 splitter looks nice on the 19's. You can see a picture of this combo if you go on Chevys website and build a SS. I like how the 19 (and I assume 20) splitter looks on the 17/18, but I doubt I'd change it if I owned a 17/18. I dont plan to change my 19's splitter either.

01-10-2020, 10:44 PM	#22
Uncle Sam Drives: 2017 Camaro 1LE Hyper Blue Join Date: Apr 2017 Location: Rockville, Maryland Posts: 374	Looks awesome! Nice to know it can be done.

01-11-2020, 10:33 AM	#23
Eldi Z Drives: 17' 1SS 1LE GBA-Black Join Date: Mar 2017 Location: TLV Posts: 875	[QUOTE=Stan1ley;10695076]So I have attached some photos and a direct link to my YouTube channel detailing my install of the 2019 1LE front splitter 2017/2018 1LE's. It is a direct install for any car with a factory installed splitter. Looks very nice indeed Questions: 1.) How much does it cost? 2.) Is it really a direct fit (same as the Part# for the 17/18 installs) without any modifications / drilling new holes, Etc.?

User Name		Remember Me?
Password