Front splitter replacement

Jmueller · 04-05-2018, 08:16 AM

Is the front splitter (black plastic part wrapping around front of car) replaceable? Had a bit of trouble judging distance in a very tight parellel spot and hit it on concrete in the front and cracked it and damaged it. Does anyone have a part number if it is replaceable? Or am I looking at an entire front bumper clip. It’s hard to tell from the parts diagram on gmpartsguy. All help is appreciated!

CT ZL1 · 04-05-2018, 12:13 PM

Quote:

Originally Posted by Jmueller

Is the front splitter (black plastic part wrapping around front of car) replaceable? Had a bit of trouble judging distance in a very tight parellel spot and hit it on concrete in the front and cracked it and damaged it. Does anyone have a part number if it is replaceable? Or am I looking at an entire front bumper clip. It’s hard to tell from the parts diagram on gmpartsguy. All help is appreciated!

Dont no for sure but it would be the most ridiculous design ever if it was not replaceable.

Homey Da Clown · 04-05-2018, 12:23 PM

It’s replaceable and comes painted. Order through dealers parts department. $200 Box is huge that it comes in.

misterjaayy · 04-05-2018, 02:30 PM

http://www.camaro6.com/forums/showthread.php?t=525033

drfeelgood · 04-05-2018, 02:45 PM

it's replaceable. Anderson makes a nice direct fit carbon fiber version also

Can'tHave2MuchHP · 04-05-2018, 02:57 PM

Anybody know the actual GM Part Number for it though? That's the most important part for me and probably the OP too.

Jmueller · 04-05-2018, 04:14 PM

Quote:

Originally Posted by Can'tHave2MuchHP

Anybody know the actual GM Part Number for it though? That's the most important part for me and probably the OP too.

Bingo. Would love the part number for the original splitter.

carguy55 · 04-05-2018, 06:10 PM

looks like it's 84176917

https://www.thatgmpartsguy.com/oem-p...oiler-84176917

https://www.gmpartsonline.net/auto-p...t-spoiler-scat

ScottMZ3 · 04-05-2018, 07:16 PM

Quote:

Originally Posted by carguy55

looks like it's 84176917

https://www.thatgmpartsguy.com/oem-p...oiler-84176917

https://www.gmpartsonline.net/auto-p...t-spoiler-scat

Wow! $135 for a PAINTED splitter? I might as well stock up on a couple in case one gets damaged!

That's cheap!!

Can'tHave2MuchHP · 04-05-2018, 07:59 PM

Thanks for the part number. I'll save it in case something happens. With the front grille and splitter being so cheap, makes me worry less about rocks and the like.

Jmueller · 04-06-2018, 07:58 PM

Anyone know if the splitter is bolt off and bolt on? Or does the whole front bumper / clip have to come off. I see that with the SS models it is bolt on, so I am just wondering if the zl1 is the same process.

Jmueller · 04-08-2018, 05:25 PM

Did some investigating myself, including unbolting all of the bolts that are visible and no, this is not a bolt on / bolt off job. There are many small white plastic clips that would probably be impossible to get to without taking the whole front bumper off.

collinms · 09-23-2019, 08:01 AM

Anyone ever do this?

EDFHOBBIES · 09-23-2019, 03:38 PM

https://trufiber.com/product-categor...6-2019-camaro/

I love my carbon fiber!

04-05-2018, 08:16 AM	#1
Jmueller Drives: 2017 ZL1 A10 Nightfall Gray Join Date: Jul 2017 Location: Fort Lauderdale Posts: 236	Front splitter replacement Is the front splitter (black plastic part wrapping around front of car) replaceable? Had a bit of trouble judging distance in a very tight parellel spot and hit it on concrete in the front and cracked it and damaged it. Does anyone have a part number if it is replaceable? Or am I looking at an entire front bumper clip. It’s hard to tell from the parts diagram on gmpartsguy. All help is appreciated!

04-05-2018, 02:45 PM	#5
drfeelgood Drives: 2017 ZL1 Convertible A10 Join Date: Aug 2017 Location: San Gabriel, CA Posts: 993	it's replaceable. Anderson makes a nice direct fit carbon fiber version also __________________ '17 White ZL1 A10 Convertible - TM ported TB - RotoFab CAI - 2.3" griptech upper pulley - Kooks 1 7/8" Headers with High Flow Cats - Borla S-type Catback - Audio Overhaul - NavTV M650-GM - 20" BlackDiForza- Michelin Pilot Sport4S - Tuned at BRC Raceworks (606rwhp/675trq) '14 CTS-V Coupe - ZL1 lid - Ported TB - Ported Snout - AirRad CAI - 8.66" lower - 2.55" upper- Greenbelt - SW Headers - SW Catback - Varimax Intercooler Pump - Track Attack Intercooler-Tuned at BRC Raceworks (551rwhp/516trq) '17 Maserati Levante- STOCK

09-23-2019, 03:38 PM	#14
EDFHOBBIES Dyno Show Queen LOL Drives: 16 SS & 17 ZL1 Both Yellow Join Date: Jan 2014 Location: Houston Posts: 4,354 View My Garage	https://trufiber.com/product-categor...6-2019-camaro/ I love my carbon fiber! __________________ Kong Ported 2650, Crawford Racing Port Injection, Weapon X 112mm Adapter, NW112mm TB, Livernois Ported LT4 Heads, Lingenfelter GT32 stealth cam, Haltech Elite, and Carbon by Trufiber

04-05-2018, 12:23 PM	#3
Homey Da Clown Drives: 2017 ZL1 A10 Vert Join Date: Jan 2018 Location: Texas Posts: 56	It’s replaceable and comes painted. Order through dealers parts department. $200 Box is huge that it comes in.

04-05-2018, 02:30 PM	#4
misterjaayy Drives: 2019 CTS-V Join Date: Feb 2016 Location: San Diego Posts: 421	http://www.camaro6.com/forums/showthread.php?t=525033

04-05-2018, 02:57 PM	#6
Can'tHave2MuchHP Drives: Fast Join Date: Mar 2015 Location: Michigan Posts: 3,696	Anybody know the actual GM Part Number for it though? That's the most important part for me and probably the OP too.

04-05-2018, 06:10 PM	#8
carguy55 Drives: 2018 1SS 1LE Join Date: Feb 2017 Location: Austin, Texas Posts: 1,573 View My Garage	looks like it's 84176917 https://www.thatgmpartsguy.com/oem-p...oiler-84176917 https://www.gmpartsonline.net/auto-p...t-spoiler-scat

04-05-2018, 07:59 PM	#10
Can'tHave2MuchHP Drives: Fast Join Date: Mar 2015 Location: Michigan Posts: 3,696	Thanks for the part number. I'll save it in case something happens. With the front grille and splitter being so cheap, makes me worry less about rocks and the like.

04-06-2018, 07:58 PM	#11
Jmueller Drives: 2017 ZL1 A10 Nightfall Gray Join Date: Jul 2017 Location: Fort Lauderdale Posts: 236	Anyone know if the splitter is bolt off and bolt on? Or does the whole front bumper / clip have to come off. I see that with the SS models it is bolt on, so I am just wondering if the zl1 is the same process.

04-08-2018, 05:25 PM	#12
Jmueller Drives: 2017 ZL1 A10 Nightfall Gray Join Date: Jul 2017 Location: Fort Lauderdale Posts: 236	Did some investigating myself, including unbolting all of the bolts that are visible and no, this is not a bolt on / bolt off job. There are many small white plastic clips that would probably be impossible to get to without taking the whole front bumper off.

09-23-2019, 08:01 AM	#13
collinms Drives: 2017 ZL1 A10 Summit White Join Date: Apr 2018 Location: Cumming, Georgia Posts: 511	Anyone ever do this?

User Name		Remember Me?
Password