What did you do to your 6th Gen Camaro today?! - Page 510

gpskinzhut · 06-18-2019, 09:19 AM

Took her out in the rain to get dirty. Truck has a dead battery and haven't had time to address it.

red_johnny · 06-18-2019, 09:35 AM

Quote:

Originally Posted by red_johnny

Primered the engine covers then dipped them. Came out pretty good. Finished product below as well as the choices I had. I think I made the right choice.

Decided to redo the tail light covers in the trunk. They fit the look so much better than the other pattern I did and it came out pretty good. The rear latch cover didn't come out so well. I used too much activator but I will redo it, just need a game plan as the piece is way to big with too many curves to dip right. Might have to divide it up and do two dips. AND>>>> I know this isn't everyones cup O tea but I like it. Think I am mostly done with the cosmetic mods and next year I will be moving onto other areas.

Blackmonba6Gen · 06-18-2019, 12:28 PM

Today,(well yesterday actually) I've wrapped my hood with the Avery Dennison Satin Black Vinyl Wrap. It looks really good and makes my front splitter stands out a tad bit more.https://www.camaro6.com/forums/pictu...ctureid=162453

CUPRA · 06-20-2019, 05:14 PM

Been busy this past week... not specifically on the Camaro, but 'for' the Camaro.

Completely cleared out the garage, put an epoxy kit on the floor, sealed with an epoxy anti-slip clear sealer, garage door insulation and installed 16 x 4ft LED lights, 8 above each bay. Also painted any pipework the same color as the wall to blend it in as well, to give it a cleaner look. Something I've wanted to do for about 14 years, and finally after moving houses 2 years ago, I made it happen!

The lights are all tied into a MyQ system, so they are motion activated as soon as you walk out there, and are operated by the garage door openers themselves as well. Converted the lightbulb screw in base to an actual electrical outlet to make it happen. Works like a charm!

It's made the garage a 'room for the cars' in the house, instead of just a garage. Love how it turned out!

Camarentino · 06-20-2019, 05:46 PM

Your garage looks amazing great job

RicSimonis · 06-20-2019, 06:11 PM

Quote:

Originally Posted by CUPRA

Been busy this past week... not specifically on the Camaro, but 'for' the Camaro.

Completely cleared out the garage, put an epoxy kit on the floor, sealed with an epoxy anti-slip clear sealer, garage door insulation and installed 16 x 4ft LED lights, 8 above each bay. Also painted any pipework the same color as the wall to blend it in as well, to give it a cleaner look. Something I've wanted to do for about 14 years, and finally after moving houses 2 years ago, I made it happen!

The lights are all tied into a MyQ system, so they are motion activated as soon as you walk out there, and are operated by the garage door openers themselves as well. Converted the lightbulb screw in base to an actual electrical outlet to make it happen. Works like a charm!

It's made the garage a 'room for the cars' in the house, instead of just a garage. Love how it turned out!

Very nice. We have almost the same stable of vehicles. ‘17 Camaro SS 50th, ‘17 Jeep CG Trailhawk, ‘96 Jeep CG (old). (The ‘96 doesn’t have a slot in the garage.)

red_johnny · 06-20-2019, 06:33 PM

That floor looks terrific! Definitely on my list when I get a garage I can call my own!

CUPRA · 06-21-2019, 07:45 AM

Quote:

Originally Posted by RicSimonis

Very nice. We have almost the same stable of vehicles. ‘17 Camaro SS 50th, ‘17 Jeep CG Trailhawk, ‘96 Jeep CG (old). (The ‘96 doesn’t have a slot in the garage.)

Nice! Mine is a 2017 2LT/RS (had a 2011 2SS for 8 years prior to this one before catastrophic issues set in), and the Jeep GC Altitude is a 2018. We had an identical 2014 Jeep JC Altitude before that, and prior to my 2011 Camaro 2SS, I had a 2006 Jeep Commander Limited (with the HEMI)... so you could say Jeep and Camaro's run in the family!

BlakeR · 06-21-2019, 08:45 PM

Great night to stop by the local A&W.

18i4m6 · 06-22-2019, 12:00 AM

First wash followed by blacking out the side markers, diffuser, lugnuts, front emblem and door handle buttons. Next up the taillights when my back stops hurting from all the leaning over.

Soleil · 06-22-2019, 03:15 AM

Quote:

Originally Posted by CUPRA

Been busy this past week... not specifically on the Camaro, but 'for' the Camaro.

Completely cleared out the garage, put an epoxy kit on the floor, sealed with an epoxy anti-slip clear sealer, garage door insulation and installed 16 x 4ft LED lights, 8 above each bay. Also painted any pipework the same color as the wall to blend it in as well, to give it a cleaner look. Something I've wanted to do for about 14 years, and finally after moving houses 2 years ago, I made it happen!

The lights are all tied into a MyQ system, so they are motion activated as soon as you walk out there, and are operated by the garage door openers themselves as well. Converted the lightbulb screw in base to an actual electrical outlet to make it happen. Works like a charm!

It's made the garage a 'room for the cars' in the house, instead of just a garage. Love how it turned out!

Wow that looks awesome.

Fatty1707 · 06-22-2019, 08:18 AM

Dusted with new duster from Amazon: MODS Please Rotate Pics!

https://www.amazon.com/gp/product/B0...?ie=UTF8&psc=1

RCF · 06-22-2019, 08:42 AM

Quote:

Originally Posted by Blackmonba6Gen

Today,(well yesterday actually) I've wrapped my hood with the Avery Dennison Satin Black Vinyl Wrap. It looks really good and makes my front splitter stands out a tad bit more.https://www.camaro6.com/forums/pictu...ctureid=162453

Looks great! Been thinking about having mine wrapped satin black myself? How hard was it? Can one person do it ok or need 2?

Chris C 1SS 1LE · 06-22-2019, 09:12 AM

Installed ROTOFAB after golf yesterday.

06-18-2019, 09:19 AM	#7127
gpskinzhut Drives: 2020 Corvette Stingray Z51 Join Date: Aug 2011 Location: Knoxville, TN Posts: 1,982 View My Garage	Took her out in the rain to get dirty. Truck has a dead battery and haven't had time to address it. __________________ 2020 Corvette 2LT Z51 2017 ZL1 A10: (SOLD) \|\| 2017 2SS M6: (SOLD) \|\| 2014 2LT Convertible: (SOLD) \|\| 2010 2LT M6 Supercharged:(SOLD) \|\| 1987 IROC-Z 5.0 M5: (SOLD)

06-18-2019, 12:28 PM	#7129
Blackmonba6Gen BLUPRINT_1LE Drives: 2022 Rapid Blue SS 1LE Join Date: May 2017 Location: Motor City -> AZ Posts: 795	Today,(well yesterday actually) I've wrapped my hood with the Avery Dennison Satin Black Vinyl Wrap. It looks really good and makes my front splitter stands out a tad bit more.https://www.camaro6.com/forums/pictu...ctureid=162453 __________________ 2022 Camaro SS 1LE \| PDR \| Rapid Blue \| Manual \| Katech Built SS 1LE \| Katech Build Sheet IG: BLUPRINT_1LE YT: BLUPRINT_1LE ----------------------------------------------------------------

06-20-2019, 05:14 PM	#7130
CUPRA Drives: '21 Bronco OBX/'18 Jeep GC Altitude Join Date: Jul 2008 Location: Keller, TX Posts: 1,413 View My Garage	Been busy this past week... not specifically on the Camaro, but 'for' the Camaro. Completely cleared out the garage, put an epoxy kit on the floor, sealed with an epoxy anti-slip clear sealer, garage door insulation and installed 16 x 4ft LED lights, 8 above each bay. Also painted any pipework the same color as the wall to blend it in as well, to give it a cleaner look. Something I've wanted to do for about 14 years, and finally after moving houses 2 years ago, I made it happen! The lights are all tied into a MyQ system, so they are motion activated as soon as you walk out there, and are operated by the garage door openers themselves as well. Converted the lightbulb screw in base to an actual electrical outlet to make it happen. Works like a charm! It's made the garage a 'room for the cars' in the house, instead of just a garage. Love how it turned out! __________________ Order Placed: 04/30/22 Order Accepted: 10/18/22 TPW: 11/07/22 Built: 11/18/22 VIN received: 11/19/22 On a Train: 02/27/23 ETA: TBD 2023 Camaro 2SS Convertible/M6/Shadow Grey Metallic/Adrenaline Red Interior/Carbon Flash Wheels/NPP

06-20-2019, 05:46 PM	#7131
Camarentino Drives: 2018 Camaro 1SS 1LE Join Date: Dec 2017 Location: Toronto, CAN Posts: 210	Your garage looks amazing great job __________________ 2018 Camaro 1SS 1LE w/PDR Summit White KN intake-MBRP cb- 2nd cat deletes- ACS sides- iroc Z spoiler- Eibach Pro- Katech 95TB- MSD Manifold-GM strut bar- Custom tune by Arun Ahuja @ CCPERF.ca

06-21-2019, 08:45 PM	#7135
BlakeR 😁😁😁😁😁 Drives: 1ss Join Date: Jul 2016 Location: Detroit Posts: 149	Cruise night Great night to stop by the local A&W. Attached Images

06-20-2019, 06:33 PM	#7133
red_johnny Drives: 2016 Gray 2SS M6 Join Date: Jun 2012 Location: Hermitage, PA Posts: 753 View My Garage	That floor looks terrific! Definitely on my list when I get a garage I can call my own!

06-22-2019, 12:00 AM	#7136
18i4m6 Drives: 2018 I4 M6 Join Date: May 2019 Location: Canada Posts: 50	First wash followed by blacking out the side markers, diffuser, lugnuts, front emblem and door handle buttons. Next up the taillights when my back stops hurting from all the leaning over. Attached Images __________________ Black 2018 Camaro LS M6 Tinted/blackout paint everywhere/debadged Catted Mishimoto downpipe Mishimoto CAI MBRP V6 axleback exhaust Jacfab/BNR Boostolator Racechip RS Firestone Firehawk Indy 500's Onstar tracking removal - pending

06-22-2019, 08:18 AM	#7138
Fatty1707 Drives: 2019 ZL1 A10 Join Date: Jan 2019 Location: Naples, FL Posts: 100	Dusted with new duster from Amazon: MODS Please Rotate Pics! https://www.amazon.com/gp/product/B0...?ie=UTF8&psc=1 Attached Images

06-22-2019, 09:12 AM	#7140
Chris C 1SS 1LE Drives: 2017 1LE Join Date: Nov 2017 Location: Brooks, GA Posts: 697	Installed ROTOFAB after golf yesterday. Attached Images __________________ '17 Bright Yellow 1LE. PDR, STB, !CAGS Borla 60606, 11925. Tony Mamo ported TB, ROTOFAB, !Sound Tube

User Name		Remember Me?
Password