[hawk02]

Originally Posted by ninetres

They don’t make the FF04 in 19s. At least they didn’t 8-10 months ago when I asked them to.

If you can't get the FF04s in 19s, I think the 20s still look darn good on the ZL1. If I remember correctly, you lose about 7 lbs a corner over the stock wheels.

[Alain]

Originally Posted by 2010REDSS

The OEM Z/28 wheels work perfect on the ZL1 1LE....and....I get comments all the time that they look better too.

First pick was last year with Hoosiers mounted, second is this year with Pirellis.

Did you get those Z28 wheels from GM?

[2010REDSS]

Originally Posted by Alain

Did you get those Z28 wheels from GM?

OEM takeoffs from fellow forum members.

[69 Z11]

Originally Posted by 2010REDSS

The OEM Z/28 wheels work perfect on the ZL1 1LE....and....I get comments all the time that they look better too.

First pick was last year with Hoosiers mounted, second is this year with Pirellis.

Wow, that looks awesome! Absolutely perfect looking and no fitment issues at all? Standard Z28 tire size?

[seanblurr]

Understand that you will be slightly limited on what camber you can achieve if you use a 1LE/Z28 wheel on a regular ZL1/SS with mag ride dampers. For those that want these wheels for the street, you will have no issues. However, those that want the wheels for track usage won't be able to get enough camber unless you cut off a piece of the strut or run a wheel spacer up front.

[RSFR]

Originally Posted by seanblurr

Understand that you will be slightly limited on what camber you can achieve if you use a 1LE/Z28 wheel on a regular ZL1/SS with mag ride dampers. For those that want these wheels for the street, you will have no issues. However, those that want the wheels for track usage won't be able to get enough camber unless you cut off a piece of the strut or run a wheel spacer up front.

I'm running -2.8 degrees camber up front using a 3mm spacer from ZL1 addons. Works great.

[mlee]

Originally Posted by ninetres

They don’t make the FF04 in 19s. At least they didn’t 8-10 months ago when I asked them to.

Yeah, when I first looked at these I didn't have a 1LE so they were okay, not perfect, but definitely in play. I see they do have the FF15 in 19 but not wide enough. Too bad they sort of made these wheels as in-betweeners so they fit the SS as well.

Originally Posted by hawk02

If you can't get the FF04s in 19s, I think the 20s still look darn good on the ZL1. If I remember correctly, you lose about 7 lbs a corner over the stock wheels.

Tire sizes really prohibit that and no 12" widths.

Originally Posted by seanblurr

Understand that you will be slightly limited on what camber you can achieve if you use a 1LE/Z28 wheel on a regular ZL1/SS with mag ride dampers. For those that want these wheels for the street, you will have no issues. However, those that want the wheels for track usage won't be able to get enough camber unless you cut off a piece of the strut or run a wheel spacer up front.

The Z/28 wheel is a tad narrower than the ZLE wheel and most running regular ZL1 or SS aren't adjusting camber. I'd say the Z/28 wheel would be pretty good for them.

Right now I'm leaning toward another set of OEM ZL1 1LE wheels unless I find some Z/28 take offs at a good price.

Originally Posted by 2010REDSS

The OEM Z/28 wheels work perfect on the ZL1 1LE....and....I get comments all the time that they look better too.

First pick was last year with Hoosiers mounted, second is this year with Pirellis.

Definitely the best why to go that I have seen

[Mcmillion]

Originally Posted by 69 Z11

I would love to see a ZL1 with OEM Z28 19" wheels, has anyone done this?

Fit great

[TMS]

Originally Posted by RSFR

I did 1LE spec'd wheels, but I figured if I'm gonna get wheels, they might as well be a little different than everyone else.

Love these wheels. Are they BC Forged RZ10s?

Sent from my SM-G950U using Tapatalk

[seanblurr]

Originally Posted by RSFR

I'm running -2.8 degrees camber up front using a 3mm spacer from ZL1 addons. Works great.

Yup, 3mm is enough.

Originally Posted by mlee

The Z/28 wheel is a tad narrower than the ZLE wheel and most running regular ZL1 or SS aren't adjusting camber. I'd say the Z/28 wheel would be pretty good for them.

The front Z28 wheel is identical, the rear is .5" narrower.

[mlee]

Originally Posted by seanblurr

Yup, 3mm is enough.



The front Z28 wheel is identical, the rear is .5" narrower.

That's what I meant by tad... 11.5 vs 12 on the rear and with no camber plates on the SS or regular ZL1 this wheel works great.

Personally I like the looks of the 1LE wheel better but would easily go Z/28 for a deal.

[RSFR]

Originally Posted by TMS

Love these wheels. Are they BC Forged RZ10s?

Sent from my SM-G950U using Tapatalk

They are.

[RUQWIKR]

They look great on SS 1LE's too! No spacer up front, just the profile grinding on the struts. No rubbing with 315 / 345 Hoosier R7 combo either, though, other than one day with those, I've been running 305 / 325 G3R's.

[SteveV]

Originally Posted by Mcmillion

Fit great

That looks awesome. I personally think that is the best camaro wheel design.

Now I need to get some for myself.

Thanks for posting these pictures.