What did you do to your 6th Gen Camaro today?! - Page 344

Martinjlm · 03-27-2018, 04:15 PM

Quote:

Originally Posted by O’Dark30

Now that would pisssss me off and we are considered stuck up or whatever for parking nowhere near civilization when we go places haha. People don’t care and are jealous, vindictive pricks most of the times..... I called a couple places for quotes and the cheapest I could find was $345 which is $100+ less than safelite. It just sucks to have to spend that when I haven’t applied or decided on one upgrade yet, smh....

If you have HUD make certain you get the right windshield replacement.

chevyboy01438 · 03-27-2018, 05:42 PM

Got my ZL1 3rd break light installed!!!

arpad_m · 03-27-2018, 05:50 PM

Quote:

Originally Posted by Soleil

I did it by my self.

took them off put them on a copy machine and transferred the pdf to .dxf file. Test cut redesign and again test cut. Now I am almost there.

Soleil, if this works out all right, would you be interested in selling a "homemade" dead pedal cover? If yes, please PM me, thanks.

Herewego · 03-27-2018, 05:51 PM

Quote:

Originally Posted by Cgocifer

Can't you just go into the settings and set the exhaust independently to race mode? That's how I have mine setup. Maybe it still closes periodically?

That's what I do. Set mine to Sport for the exhaust and all other settings on based default. Never understood the fuse pull, unless that doesn't work with the track setting, but maybe I'm misinformed.

Rayfield · 03-27-2018, 05:58 PM

Quote:

Originally Posted by Herewego

That's what I do. Set mine to Sport for the exhaust and all other settings on based default. Never understood the fuse pull, unless that doesn't work with the track setting, but maybe I'm misinformed.

My observation seemed to be that it was still closing the valve at certain times/rpms. Not now, sounds glorious at all times. Yeah, I was using the Track setting, previously.

Someone please correct me if I've got it wrong..

srcstc · 03-27-2018, 06:46 PM

Quote:

Originally Posted by Herewego

That's what I do. Set mine to Sport for the exhaust and all other settings on based default. Never understood the fuse pull, unless that doesn't work with the track setting, but maybe I'm misinformed.

Unless you do the fuse pull it's not open all the time. Not even in track mode.

CUPRA · 03-27-2018, 08:11 PM

Ordered my black GM bow ties today.

Only had my new Camaro 2 weeks, second mod already! First was the trunk vinyl black out panel last weekend! LED side markers next!

Cgocifer · 03-27-2018, 11:09 PM

Quote:

Originally Posted by srcstc

Unless you do the fuse pull it's not open all the time. Not even in track mode.

Ah, that's why I still get that blip when I accelerate a bit more aggressively. Hmmm. Which fuse is it? Does the fuse pull impact anything else? ;-)

IMadeYouReadThis · 03-28-2018, 04:27 AM

Quote:

Originally Posted by Cgocifer

Ah, that's why I still get that blip when I accelerate a bit more aggressively. Hmmm. Which fuse is it? Does the fuse pull impact anything else? ;-)

fuse number 51. RS and SS. No issues

srcstc · 03-28-2018, 04:33 AM

Quote:

Originally Posted by Cgocifer

Ah, that's why I still get that blip when I accelerate a bit more aggressively. Hmmm. Which fuse is it? Does the fuse pull impact anything else? ;-)

https://youtu.be/8tnHhMYLpqQ

Rayfield · 03-28-2018, 12:04 PM

Quote:

Originally Posted by Cgocifer

Ah, that's why I still get that blip when I accelerate a bit more aggressively. Hmmm. Which fuse is it? Does the fuse pull impact anything else? ;-)

So far, so good, for me, F51 in my box, as stated. Definitely more throaty at lower rpms than just running it in Track mode, judging from the last couple of days of driving.

O’Dark30 · 03-28-2018, 12:49 PM

Quote:

Originally Posted by Martinjlm

If you have HUD make certain you get the right windshield replacement.

I don’t have the HUD option so I’m good on that, I appreciate the heads up though. I’m now seeing a lot of what I had in my 2SS that wasn’t standard hahaha.... still diggin this 1SS though 👌🏾✌🏾

Sheriff37 · 03-28-2018, 01:16 PM

Quote:

Originally Posted by Soleil

I did it by my self.

took them off put them on a copy machine and transferred the pdf to .dxf file. Test cut redesign and again test cut. Now I am almost there.

You put the actual pedals on a copy machine? That's an interesting way to do that, very cool! Did the measurements come out pretty accurately or did you need to make some adjustments?

Soleil · 03-28-2018, 01:27 PM

Quote:

Originally Posted by Sheriff37

You put the actual pedals on a copy machine? That's an interesting way to do that, very cool! Did the measurements come out pretty accurately or did you need to make some adjustments?

It came out quite good. It really depends on the quality of the copy machine

but some small adjustments needs to be done.

03-27-2018, 05:42 PM	#4804
chevyboy01438 Drives: 2010 Camaro 1SS Join Date: Mar 2015 Location: Iowa Posts: 536	Got my ZL1 3rd break light installed!!! Attached Images __________________ Mod List: Perma-Grin, Darkened tail lights, ZL1 3rd break light, JW Motorsports LED side markers, American Authorities Window Louver, American Authority ZL1 bumper, 11/30/17 \| Club F1FTY

03-27-2018, 08:11 PM	#4809
CUPRA Drives: '21 Bronco OBX/'18 Jeep GC Altitude Join Date: Jul 2008 Location: Keller, TX Posts: 1,413 View My Garage	Ordered my black GM bow ties today. Only had my new Camaro 2 weeks, second mod already! First was the trunk vinyl black out panel last weekend! LED side markers next! __________________ Order Placed: 04/30/22 Order Accepted: 10/18/22 TPW: 11/07/22 Built: 11/18/22 VIN received: 11/19/22 On a Train: 02/27/23 ETA: TBD 2023 Camaro 2SS Convertible/M6/Shadow Grey Metallic/Adrenaline Red Interior/Carbon Flash Wheels/NPP

User Name		Remember Me?
Password