You are browsing camaro6 
03-15-2026, 07:09 PM
|
#1 |
          
Drives: '20 ZLE Join Date: Jun 2020
Location: Mile High
Posts: 4,191
|
I need a better front tire
I'm running Mt Et St R on the back in 325/50-15, and Nitto 05 285/19 fronts. The car does not want to drive in a straight line. I'm told I need smaller and narrower front wheels and tires.
99% of my miles (2500/yr) are on the local Mexico highways. Suggestions?
__________________
2020 ZL1LE A10.
LME LT4 390 short block, LME CID Heads, Kong E2650, FBO. 15" conversion, MT ET Street R 325/15. 100 octane: 1045hp/1055tq. 100 octane + Meth (1x10+): 1117 hp/1067 tq |
|
|
|
03-15-2026, 08:14 PM
|
#2 |
 
|
I just put these on the front of my car. Drove to and ran them at the track this weekend; DRs on back. Really happy with them.
Atturo AZ850 245 /50 R18 w/Weld 18x8 wheels.
__________________
Camaro SS - (almost) FBO/E85: Tuned by Snackbar Tuning/21st Century Muscle Cars
|
|
|
|
|
03-16-2026, 05:06 PM
|
#3 | |
|
Drives: '20 ZLE Join Date: Jun 2020
Location: Mile High
Posts: 4,191
|
Quote:
How are they on the street?
__________________
2020 ZL1LE A10.
LME LT4 390 short block, LME CID Heads, Kong E2650, FBO. 15" conversion, MT ET Street R 325/15. 100 octane: 1045hp/1055tq. 100 octane + Meth (1x10+): 1117 hp/1067 tq |
|
|
|
|
|
03-16-2026, 09:30 PM
|
#4 |
|
|
Surprisingly good. I didn't have a lot of high hopes due to the low price, but they're pretty good.
__________________
Camaro SS - (almost) FBO/E85: Tuned by Snackbar Tuning/21st Century Muscle Cars
|
|
|
|
|
03-17-2026, 04:25 AM
|
#5 | |
Drives: 2023 ZL1 - Beast Build Join Date: Dec 2022
Location: Columbus, Ohio
Posts: 1,264
|
Quote:
https://www.camaro6.com/forums/showthread.php?t=611982
__________________
Katech Track Day CAM 38%•BTR Dual Valve Springs-Johnson Lifters•Trend 3/8 Chromoly Pushrods• VVT Del•CNC Ported Heads•AFM Delete• C5-R Timing Chain•Katech Oil Pump•Katech 112mm•Maggie 2650 3.25” Upper & ATI SD w/10.32” +20%•10 Rib Belt•RFBG•FI Interchiller Stage 2•THPSI Port w/875cc Inj•Dual Drop In Fuel Pump•DSX Aux Pump•Stainless Works 2" w/Legend NPP Axle Back•GESI UHO 4.5" CATs•Brisk RR14S Plugs•BMR Motor Mounts•BMR Cradle Lockout/Bushings Kit•DSS Chromoly DS•RPM 8-Point Roll Cage•10lb FireSense+ w/4Fire SFI 17.1 Fire Sys•Weld Forged Vitesse Rear 17x10 Beadlocks-Front 18x6•Unlocked TCM
 |
|
|
|
|
|
03-17-2026, 11:22 AM
|
#6 | |
|
Drives: '20 ZLE Join Date: Jun 2020
Location: Mile High
Posts: 4,191
|
Quote:
__________________
2020 ZL1LE A10.
LME LT4 390 short block, LME CID Heads, Kong E2650, FBO. 15" conversion, MT ET Street R 325/15. 100 octane: 1045hp/1055tq. 100 octane + Meth (1x10+): 1117 hp/1067 tq |
|
|
|
|
|
03-17-2026, 12:14 PM
|
#7 | |
|
Drives: 2023 ZL1 - Beast Build Join Date: Dec 2022
Location: Columbus, Ohio
Posts: 1,264
|
Quote:
Tim Perdieu at Weld can hook you up. He's on FB or I can PM you his email. Front wheels: 18x6 https://www.weldwheels.com/wheels/fo...MaAoeZEALw_wcB Rear Beadlocks: 17x10 https://www.beefcakeracing.com/weld-...Qm9e3FaUpOIbXI The tires are nothing more than the 305/45R17 rears and the MT Sportsman 18x6 (not sure the exact size, I will check when I get home)
__________________
Katech Track Day CAM 38%•BTR Dual Valve Springs-Johnson Lifters•Trend 3/8 Chromoly Pushrods• VVT Del•CNC Ported Heads•AFM Delete• C5-R Timing Chain•Katech Oil Pump•Katech 112mm•Maggie 2650 3.25” Upper & ATI SD w/10.32” +20%•10 Rib Belt•RFBG•FI Interchiller Stage 2•THPSI Port w/875cc Inj•Dual Drop In Fuel Pump•DSX Aux Pump•Stainless Works 2" w/Legend NPP Axle Back•GESI UHO 4.5" CATs•Brisk RR14S Plugs•BMR Motor Mounts•BMR Cradle Lockout/Bushings Kit•DSS Chromoly DS•RPM 8-Point Roll Cage•10lb FireSense+ w/4Fire SFI 17.1 Fire Sys•Weld Forged Vitesse Rear 17x10 Beadlocks-Front 18x6•Unlocked TCM
|
|
|
|
|
|
03-19-2026, 08:12 AM
|
#8 | |
|
Drives: '20 ZLE Join Date: Jun 2020
Location: Mile High
Posts: 4,191
|
Mine has Weld S81 rears, so I prefer those as fronts. My main issue now is which 28" OD tire to run on the front. I really don't need actual Skinnies, just less tread and Section
Quote:
__________________
2020 ZL1LE A10.
LME LT4 390 short block, LME CID Heads, Kong E2650, FBO. 15" conversion, MT ET Street R 325/15. 100 octane: 1045hp/1055tq. 100 octane + Meth (1x10+): 1117 hp/1067 tq |
|
|
|
|
|
|
|
|
|
Post Reply
|
|
|
