|
|
#1 |
![]() Drives: 2023 Camaro ZL1 10spd Join Date: Jul 2015
Location: Derry NH
Posts: 8
|
2023 ZL1
Found a mouse nest in the cabin air filter. Replaced it. Still have a faint smell in the car. I would like to remove the fan to clean it out. How do you remove the plastic under the glove box, so i can access the screws to the fan? |
|
|
|
|
|
#2 |
![]() Drives: 2024 Camaro 1SS Join Date: Mar 2024
Location: Minnesota
Posts: 339
|
You'll have to start with the 4 screws that hold the cover on below and in front of the glovie. Hard to get at, especially if your fat like me. I then assume you can get at the heater core, pull back carpet. Fan should be near that. Just to say, I have never done it on my Camaro, but many other vehicles.
|
|
|
|
|
|
#3 |
![]() ![]() ![]() Drives: 2023 2SS Convertible Join Date: May 2009
Location: Metro Detroit
Posts: 1,194
|
Looks like you have to drop the lower airbag then the fan drops out the bottom.
-Geoff
__________________
'12 2SS RS Convertible - Traded in.
'16 2SS Convertible - White on white, mag-ride, NPP, nav. Sold! '23 2SS Convertible -Same as above except orange. |
|
|
|
|
|
|
|
|
Post Reply
|
|
|